Aspen Ras għat-Tripied minn Colorado Tripod Company

Id-disinn Aspen Ras għat-Tripied minn Colorado Tripod Company huwa rebbieħ stmat ħafna tal-prestiġjuż 2021 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Kameras u Tagħmir tal-Fotografija.

FiddaTagħmir tal-Fotografija· 2021

Aspen Ras għat-Tripied

minn Colorado Tripod Company

Klijent: Colorado Tripod Company

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Tagħmir tal-Fotografija

39,753

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #108315

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Aspen Ras għat-Tripied

Aspen hija ras għat-tripied iddisinjata biex tissimplifika l-kompożizzjoni fotografika. Qafas miftuħ jippermetti li kamera mwaħħla ddur ferm 'il hinn minn 90 grad fiż-żewġ direzzjonijiet, u b'hekk jagħti bidliet mgħaġġla bejn l-orjentazzjoni orizzontali u vertikali mingħajr bżonn ta' brekits-L goffi. Il-ballun għandu qalba vojta b'toqob li jnaqqsu l-piż filwaqt li jżommu s-saħħa. Klamp b'lieva aġġustabbli jżomm firxa wiesgħa ta' pjanċi tal-kameras, kontroll tal-frizzjoni jistabbilixxi r-reżistenza, u serratura tal-panning tippermetti rotazzjoni sħiħa għal ritratti panoramiċi. Aspen hija maħduma bil-magni mill-aluminju anodizzat iebes.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Aspen Ras għat-Tripied huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Aspen Ras għat-Tripied ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Aspen Ras għat-Tripied huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Dimensjonijiet u Ippakkjar: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Tikketti: tripod head, ball head, camera support, tripod, photography accessory
Teknoloġija tal-Produzzjoni: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Sfida tad-Disinn: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Riċerka: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Ispirazzjoni: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Tul tal-Proġett: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Fluss tal-Operazzjoni: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Privattivi: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Membri tat-Tim: Colorado Tripod Company