Vista EY2T Kamera Pengenalan Biometrik Bermotor oleh Chris Dopp & Travis Baldwin

Reka bentuk Vista EY2T Kamera Pengenalan Biometrik Bermotor oleh Chris Dopp & Travis Baldwin ialah pemenang yang sangat dihormati bagi 2015 A' Design Award Perak yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Produk Keselamatan, Keselamatan dan Pengawasan.

PerakProduk Keselamatan· 2015

Vista EY2T Kamera Pengenalan Biometrik Bermotor

oleh Chris Dopp & Travis Baldwin

Klien: Vista Imaging and Crea Inc Design LTD

Pemenang A' Design Award Perak dalam Kategori Produk Keselamatan

25,961

Pemenang Anugerah Yang Disahkan

Sahkan Status Anugerah untuk #40052

Lawati Laman Lihat di A' Design Award Siaran Akhbar Lencana Anugerah

Warna

Reka Bentuk

Mengenai Vista EY2T Kamera Pengenalan Biometrik Bermotor

Vista EY2T adalah kamera pengenalan biometrik bermotor untuk pengecaman iris dan wajah. Peranti ini mengimbas medan pandangan untuk mengesan wajah, kemudian motor akan memutarkan kamera untuk menyasarkan mata. Penyebaran LED infra merah yang luas serta sistem autofokus membolehkan tangkapan imej pada jarak 3 hingga 6 kaki, sehingga tidak memerlukan penyasaran secara manual. Sembilan sensor hadapan disatukan di belakang satu permukaan hitam tunggal, dan bentuk silinder seperti pil dengan hujung membulat mencipta rupa bentuk yang tenang dan tidak mengancam. Kamera ini boleh digunakan secara berdiri sendiri atau dengan pemasangan pada dinding.

Pengiktirafan

Mengenai A' Design Award Perak

Vista EY2T Kamera Pengenalan Biometrik Bermotor ialah pemenang A' Design Award Perak, pengiktirafan yang sangat berprestij yang dianugerahkan kepada reka bentuk bertaraf tinggi, indah dan mengagumkan. Pemenang Perak ialah karya yang amat cemerlang dan sangat kreatif yang menggambarkan kepakaran, bakat dan ketajaman fikiran yang luar biasa pereka bentuknya. Vista EY2T Kamera Pengenalan Biometrik Bermotor diharapkan menjadi karya yang menakjubkan, contoh teladan, sangat profesional dan sangat inovatif. Reka bentuk pemenang A' Design Award Perak ini ialah ciptaan yang sangat ketara dan dikagumi yang memberi manfaat kepada dan memajukan batas seni, sains, reka bentuk dan teknologi. Vista EY2T Kamera Pengenalan Biometrik Bermotor ialah ciptaan yang sangat dicemburui yang membangkitkan keinginan, membawa perasaan positif dan mencetuskan rasa hairan serta kagum.

Di Sebalik Reka Bentuk

Kit Akhbar

Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.

Ciri-Ciri Unik: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Dimensi & Pembungkusan: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Tag: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Teknologi Pengeluaran: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Cabaran Reka Bentuk: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Penyelidikan: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspirasi: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Tempoh Projek: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Aliran Operasi: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Ahli Pasukan: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Kredit Imej: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015