Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat oleh David Ou

Reka bentuk Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat oleh David Ou ialah pemenang yang sangat dihormati bagi 2026 A' Design Award Emas yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Kejuruteraan Produk dan Teknikal.

EmasKejuruteraan· 2026

Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat

oleh David Ou

Klien: Forcemech International LLC

Pemenang A' Design Award Emas dalam Kategori Kejuruteraan

56,695

Pemenang Anugerah Yang Disahkan

Sahkan Status Anugerah untuk #180258

Lawati Laman Lihat di A' Design Award Siaran Akhbar Lencana Anugerah

Warna

Reka Bentuk

Mengenai Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat

Forcemech Ultralite G20 Pro ialah kerusi roda elektrik boleh lipat yang direka untuk mobiliti harian. Rangkanya merupakan struktur monokok gentian karbon yang memberikan kekukuhan tinggi dengan berat yang rendah. Kerusi ini seberat kira-kira 25 paun tanpa bateri dan mampu menampung sehingga 300 paun. Struktur lipatan yang padat membolehkan penyimpanan dan pengangkutan yang mudah. Kawalan diletakkan dalam jarak capaian yang mudah bagi pecutan, pembelokan dan pemberhentian yang lancar. Geometri tempat duduk direka bentuk untuk mengurangkan keletihan semasa penggunaan berpanjangan. Reka bentuk ini menyokong kebebasan, keselamatan dan keselesaan bagi golongan yang mempunyai mobiliti terhad.

Pengiktirafan

Mengenai A' Design Award Emas

Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat ialah pemenang A' Design Award Emas, pengiktirafan yang amat berprestij yang dianugerahkan kepada reka bentuk kelas pertama, menakjubkan dan cemerlang. Pemenang Emas ialah ciptaan yang sangat inovatif, berwawasan dan berkilau memukau yang mencerminkan kegeniusan, kebijaksanaan dan kepakaran pereka bentuknya. Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat diharapkan menjadi ciptaan yang sangat dipuji, perintis aliran dan monumental yang memberikan nilai tanpa tandingan. Reka bentuk pemenang A' Design Award Emas ini ialah projek yang menakjubkan dan disegani yang memberi manfaat besar kepada dan memajukan batas seni, sains, reka bentuk dan teknologi. Forcemech Ultralite G20 Pro Kerusi Roda Elektrik Boleh Lipat mencetuskan perasaan keinginan yang kuat, membangkitkan semangat, menggalakkan kreativiti dan memukau kita.

Di Sebalik Reka Bentuk

Kit Akhbar

Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.

Ciri-Ciri Unik: This power wheelchair enhances daily mobility through structural stability, ergonomic comfort, and intuitive usability. A lightweight, rigid frame improves handling and portability, while engineered seating geometry reduces fatigue during extended use for confident everyday travel and easier storage. Refined detailing, durable materials, and a compact folding structure set it apart from conventional mobility devices, supporting independence, safety, and long-term comfort.
Dimensi & Pembungkusan: Specifications

Power chair weight (without battery): 25 lbs

Maximum weight capacity: 300 lbs

Maximum climbing slope: 12°

Maximum speed: 4 mph

Maximum travel distance: 10–15 miles

Unfolded dimensions (L × W × H): 36.5" × 22.5" × 36"

Folded dimensions (L × W × H): 29" × 10" × 28.5"

Armrest height (from ground): 28.5"

Seat height (from ground): 19.5"

Seat cushion size (L × W × H): 18" × 17" × 0.6"

Ground clearance: 1.3"

Frame material: Carbon fiber

Wheel material: Polyurethane

Front wheel size (diameter × width): 6.5" × 1.6"

Rear wheel size (diameter × width): 10.5" × 1.6"

Turning radius: 34.25"
Tag: Ultralite G20, Power wheelchair, Carbon fiber wheelchair, Lightweight mobility device, Foldable wheelchair, lightweight mobility design, Assistive technology, Independent living
Teknologi Pengeluaran: The Ultralite G20 was developed around a 100% carbon fiber monocoque frame architecture, marketed as the Carboflexion™ structure, to achieve high stiffness with reduced overall weight. The realization process focused on structural integration, weight optimization, and compact folding geometry. Production considerations include precision carbon fiber layup, reinforced load-bearing joints, integrated battery housing, and compact drivetrain packaging to balance portability, durability, and daily-use reliability.
Cabaran Reka Bentuk: The main challenge was reducing overall weight without compromising structural integrity, foldability, or daily-use durability. Creatively, the project required balancing premium material expression with practical mobility needs. Technically, the use of a full carbon fiber frame introduced constraints in load distribution, joint reinforcement, manufacturability, and cost control. The work also had to respond to real user expectations for portability, reliability, and safe long-term performance.
Penyelidikan: Type of Research: applied product and user-centered mobility research. Research Objectives: reduce weight, improve portability, and maintain structural reliability. Methodology: iterative industrial design and engineering validation. Data Collection and Research Tools Used: user feedback, dimensional studies, material analysis, and prototype evaluation. Participants or Experiments: internal product teams and real-use handling tests. Results: a lighter carbon fiber mobility platform. Insights and Impacts: weight reduction improves usability and transport. Effect of the Research in Real-Life Phenomena such as Business, Society and Design Itself: supports accessibility, product adoption, and practical innovation in mobility design.
Inspirasi: This project was inspired by the growing need for mobility solutions that support long-term daily use in aging populations and individuals with limited mobility. Research into user behavior revealed that discomfort, fatigue, and complex operation are common barriers to independence. The design is informed by ergonomic studies, material optimization, and structural engineering principles, aiming to balance comfort, safety, and ease of use while reducing physical strain and cognitive load.
Tempoh Projek: Project Started November 2023 in Houston USA and finished in December 2025 in Shenzhen China
Aliran Operasi: The power wheelchair is designed for simple, intuitive operation, allowing users to unfold, sit, and move with minimal effort. Controls are positioned for easy reach and clear understanding, enabling smooth acceleration, turning, and stopping. The folding structure transforms the chair into a compact form for storage or transport. Every interaction is designed to reduce physical strain, improve confidence, and support comfortable, independent daily mobility.
Paten: Forcemech Copyrighted
Carboflexion™ 100% Carbon Fiber Monocoque Frame