Reka bentuk The Flett Kepingan Kalis Bumbung oleh Scott Flett ialah pemenang yang sangat dihormati bagi 2023 A' Design Award Besi yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Bentuk dan Produk Cetakan 3D.
BesiCetakan 3D· 2023
The Flett Kepingan Kalis Bumbung
oleh Scott Flett
Klien: Scott Flett Architecture Workshop.
Pemenang A' Design Award Besi dalam Kategori Cetakan 3D
Pemenang Anugerah Yang Disahkan
Sahkan Status Anugerah untuk #141650Reka Bentuk
Mengenai The Flett Kepingan Kalis Bumbung
Flett merupakan kepingan kalis bumbung yang direka untuk pelapik seni bina jenis sesendal berdiri (standing seam). Kepingan kalis ini dihasilkan melalui pencetakan 3D menggunakan plastik ASA, berukuran 265 kali 50 kali 100 milimeter dengan ketebalan 2 milimeter. Bentuknya melitupi bawah satu helai pelapik, membolehkan perubahan arah, kemudian melitupi atas helai seterusnya. Bahagian ini disesuaikan dengan profil dan warna kepingan bumbung, dan bahannya stabil terhadap haba, stabil terhadap sinaran UV serta tidak toksik. Kepingan kalis ini boleh dipasang secara berturutan oleh tukang mahir umum, dan bertujuan untuk mengurangkan kebocoran pada bahagian sambungan bumbung yang sukar.
Pengiktirafan
Mengenai A' Design Award Besi
The Flett Kepingan Kalis Bumbung ialah pemenang A' Design Award Besi, pengiktirafan yang berprestij yang dianugerahkan kepada reka bentuk yang baik yang memenuhi keperluan profesional dan industri yang dijangka daripada ciptaan yang direka dengan baik. Pemenang Besi menunjukkan kemahiran yang besar, kepakaran yang tinggi, kefahaman pakar dan keupayaan kreatif penciptanya. The Flett Kepingan Kalis Bumbung diharapkan menjadi ciptaan yang sangat dihargai, dikagumi dan disayangi yang praktikal dan inovatif. Reka bentuk pemenang A' Design Award Besi ini menyepadukan amalan terbaik industri dan mempunyai ciri teknikal yang kompeten yang dikaitkan dengan kepakaran dan bakat. The Flett Kepingan Kalis Bumbung dihormati kerana ketelitiannya dan direka untuk memberikan peningkatan kualiti hidup yang membantu menjadikan dunia tempat yang lebih baik.
Di Sebalik Reka Bentuk
Kit Akhbar
Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.
- Ciri-Ciri Unik
- The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
- Dimensi & Pembungkusan
- 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile. - Tag
- roof, flashing, roof flashing, 3d print, 3d printing, additive forming
- Teknologi Pengeluaran
- The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent. - Cabaran Reka Bentuk
- Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
- Penyelidikan
- The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem. - Inspirasi
- Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
- Tempoh Projek
- The project started on January 2017 and is ongoing.
The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.
The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.
I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'. - Aliran Operasi
- I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.
The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations. - Paten
- Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop
Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728 - Ahli Pasukan
- Scott Flett
- Kredit Imej
- Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo
Ditaja
Terokai Melangkaui Designers.org
Temui produk, perkhidmatan dan peluang daripada rakan pengiklanan kami.
Lagi untuk Diterokai
Reka Bentuk Berkaitan
Terokai lebih banyak reka bentuk pemenang anugerah daripada kategori yang sama, dipilih berdasarkan merit.
