Reka bentuk Steel U Meja Bar oleh Joey van Beek ialah pemenang yang sangat dihormati bagi 2022 A' Design Award Besi yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Seni Halus dan Pemasangan Seni.

BesiSeni Halus· 2022

Steel U Meja Bar

oleh Joey van Beek

Klien: Industrial Office

Pemenang A' Design Award Besi dalam Kategori Seni Halus

20,781

Pemenang Anugerah Yang Disahkan

Sahkan Status Anugerah untuk #137000

Lihat di A' Design Award Siaran Akhbar Lencana Anugerah

Warna

Reka Bentuk

Mengenai Steel U Meja Bar

Steel U, reka bentuk yang berasaskan masa lalu, dicipta pada masa kini dan dibuat dengan niat untuk memberi inspirasi kepada masa depan. Ini menghasilkan gabungan meja keluli terpakai semula yang disokong oleh kaki konkrit yang dimusnahkan oleh emosi fizikal. Dengan cara ini reka bentuk menjadi sebahagian daripada orang yang memusnahkan konkrit. Gabungan itu memberi cabaran fizikal dan mental semasa proses itu, tetapi akhirnya menghasilkan reka bentuk yang memberi kepuasan.

Pengiktirafan

Mengenai A' Design Award Besi

Steel U Meja Bar ialah pemenang A' Design Award Besi, pengiktirafan yang berprestij yang dianugerahkan kepada reka bentuk yang baik yang memenuhi keperluan profesional dan industri yang dijangka daripada ciptaan yang direka dengan baik. Pemenang Besi menunjukkan kemahiran yang besar, kepakaran yang tinggi, kefahaman pakar dan keupayaan kreatif penciptanya. Steel U Meja Bar diharapkan menjadi ciptaan yang sangat dihargai, dikagumi dan disayangi yang praktikal dan inovatif. Reka bentuk pemenang A' Design Award Besi ini menyepadukan amalan terbaik industri dan mempunyai ciri teknikal yang kompeten yang dikaitkan dengan kepakaran dan bakat. Steel U Meja Bar dihormati kerana ketelitiannya dan direka untuk memberikan peningkatan kualiti hidup yang membantu menjadikan dunia tempat yang lebih baik.

Di Sebalik Reka Bentuk

Kit Akhbar

Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.

Ciri-Ciri Unik: Steel U, is a combination of reusing emotion and scrap metal. The tabletop is made from 70mm solid reused steel which is supported by two concrete blocks. These are connected by reinforcement steel which is made into shape by forging. The shape of the block is made by the person who owns the table. The way this is done; is by pouring first a smooth concrete block in a mold, which then will destroyed by the owner with a sledgehammer and jack hammer.
Dimensi & Pembungkusan: Width 3220mm x Depth 650mm x Height 1120mm. Weight 988kg. Tabletop is S355 steel displayed under 10mm hardened glass. Legs are regular concrete with an inner steel shell to create an air chamber for reducing weight. Connection rods are reinforcement steel.
Tag: Steel U, Thoughts, Emotion, Steel, Concrete, Forged, Industrial Office
Teknologi Pengeluaran: The tabletop is made from 70mm S355 steel which was used for producing machine parts. The shapes are made by the oxygen cutting process and when no more parts could come from the plate, it became scrap metal. This was outside, which gave after 2 years in the rain and sun the current look. The reinforcement steel rods where then first forged in an arch and then welded to the tabletop. After making a steel mold, the reinforcement steel was place in the mold and then covered in regular concrete.
Cabaran Reka Bentuk: The hardest part was to make the concrete legs, which had to look like demolition but had to show the emotion of the owner. So I called help from my best friend, who is my father, because he had built his own house. I explained the look and strength that I wanted to have and he knew right away what was needed and how to execute. This way he thought and showed me what I needed to know so I could make the second leg myself with him as my mentor by my side checking.
Penyelidikan: The first research I did, was to check if I could find on the internet a furniture design that ,was or looked like it, came from a demolition. After not finding it, I started with the question on how to make the process an experience. My mind went from concrete, to create, to sculpting, to sculpture, to how to sculpt, to thoughts, to experiencing and then to emotion. This resulted in the method of the owner using emotions physically to destroying the legs first to then create.
Inspirasi: At the company which I have with my father to build conveyors, I wanted to create an office that was not about functionality, but about productivity. Inspired by my love for industrial designs I noticed the tabletop between the scrap metal, and wanted to use it because that is what you see when standing behind it. The legs got inspiration from demolition. But I wanted to put literally my emotions in to the concrete base, so I came up with the concept of pouring it first and then destroying it.
Tempoh Projek: The idea started on July 2020 in Ede, The Netherlands at my home. But because the tabletop did not yet have the right appearance I needed to wait. When it did have the appearance, it was January 2022. The legs were then made and finished on 13 February 2022 in Ede, The Netherlands at my workshop.
Aliran Operasi: The tabletop is made from scrap metal, so this way it cannot be replicated because steel and the way it is handled during production is never the same. Then the reinforcement steel to support it is there to make it look as if the concrete legs came out of a demolition. The concrete shape is not just for the demolition look, but also to make the table show the emotion of the owner. The owner will have thoughts when destroying the legs and those thought at that moment will be visible to them.