Дизајнот Lasso Декоративен Текстил од дизајнерот Cristina Orozco Cuevas е високо ценет добитник на престижната 2014 Бронзена награда A' Design Award во натпреварувачката категорија Дизајн на текстил, ткаенини, текстури, шари и платно.
БронзенаТекстил· 2014
Lasso Декоративен Текстил
Клиент: Cristina Orozco Cuevas Studio
Добитник на Бронзена награда A' Design Award во категоријата Текстил
Верифициран добитник на награда
Верифицирај го статусот на наградата за #30204Дизајнот
За Lasso Декоративен Текстил
Ласо како дефиниција е долг јаже со прстенест звук на едниот крај. Наместо да се инспирираме; овој текстил е резултат на. Има и посебен допир и естетски, покрај некои специјални распрснати канали, така што светлината може да помине многу лесно. Тоа е половина индустриско - половина стокмено, ткаено во електронски разбои и исечено со рака. Овој проект е многу атрактивен и зависност како бонбони и беше еден од најголемите предизвици и откритие на мојата кариера како дизајнер на текстил. Овој проект е за serendipia, сопнување, откритие на случајност, среќа и несреќа.
Признанието
За Бронзена награда A' Design Award
Lasso Декоративен Текстил е добитник на Бронзената награда A' Design Award, високо престижно признание што се доделува на извонредни дизајни што се одликуваат со креативност, генијалност и лукавост. Бронзените добитници се доволно вешти и воодушевувачки креативни творби што го потврдуваат огромното искуство, имагинација и снаодливост на нивните дизајнери. Се очекува Lasso Декоративен Текстил да биде високо ценет, восхитуван и сакан предмет, значајно професионален и иновативен. Овој дизајн со Бронзена награда ги вклучува најдобрите практики во уметноста, науката, дизајнот и технологијата и се одликува со внимание кон деталите. Lasso Декоративен Текстил одлично ги задоволува потребите, ги допира желбите, ги маѓепсува чувствата и ја буди љубопитноста.
Зад дизајнот
Прес-комплет
Заслуги, членови на тимот и технички детали обезбедени од дизајнерот.
- Уникатни својства
- half industrial - half crafted, designed with textile CAD software, woven in jacquard electronic looms and cut by hand. It is woven industrially, but cut by hand which gives job to machines and external people. It forms vertical channels as a kind of fray where the light can pass through very sofltly. The frays are crafted processes and lasts months. A fabric with this kind of processes in the industry mills is nearly impossible but not that much.
- Димензии и пакување
- Widths available: 1.40 m and 2.80 m. Rapport repeat: 35 cm width x 25 cm height. Uses: lamps, pillows, bedscarfs and decorative curtains. As a finish ironing the loose fur brings more volume and the frayed channels are more obvious. It is of massive production and the loose yarns are strongly moored with a tafeta special weave union.
- Ознаки
- Jacquard, textile, decoration, fabric, lasso, half indusrtrial, half handmade, fur
- Производствена технологија
- All polyester dyed yarns woven in Jacquard electronic looms. The floated yarns are cut manually by a special tool we call knife shutter. The weave technique is very old (double fabric). However the important aspect is how I applied the weaves interlaced in order to be viable to be produced and not just as a prototype as good productivity performance. The special tool developed reminded textile engineers old techniques to make corduroy.
- Дизајн предизвик
- At the beginning the aim was to develop a fabric with square bags. It would have little bags to put inside tools or jewelry. After weaving and testing different techiques, this came up as a serendipity all of it. There were more than 10 previews designs to get to the final lasso fabric. The weaves interaction result was floats in warp and weft. To cut the yarns in vertical and horizontal, we developed a special tool that works as a long shuttle knife to have a better and faster production. It was an enormous challenge to have it accomplished as a product and to convince the mill that it would work.
- Истражување
- The research was completely experimental. Textile engineers were afraid that using this technique on industrial looms could not work, specially the machines weaving. The process of cutting the loose yarns was hard in order to bring a product that because of the hand crafted process would not be so expensive that would not work with the market prices. Besides the lead time to deliver a roll of this product within 3 weeks at least. Since warping process till the client's door. The cut part can be done by external workers so other people get a job.
- Инспирација
- I named it lasso as a long rope with a running noose at one end. This project can be described as: experimentation. This fabric started with the research of something very different from the result. More than inspiration this project is about having luck, stumbling upon, chance discovery, fortuity and accident. It is a piece of hard work, research, mulish and not withdraw.
- Траење на проектот
- The project started in March, 2012 and ended in September, 2012.
- Оперативен тек
- It has a special appearance as it seems as an extra application or embroidery upon the fabric but in fact it is woven like that. People always want to touch first than see the furry yarns. If there is light behind the soft feeling is quite special and light passes through the frayed parts. This kind of textile can replace goose feathers.
- Членови на тимот
- Cristina Orozco Cuevas
Спонзорирано
Истражете надвор од Designers.org
Откријте производи, услуги и можности од нашите рекламни партнери.
Откријте повеќе
Поврзани дизајни
Разгледајте повеќе наградени дизајни од истата категорија, избрани по заслуга.