Dond Meja Randah dek Jinyang Koo adolah pamenang nan sangaik tahormat dari A' Design Award Gangsa 2020 nan sangaik prestigius dalam Kategori Kompetisi Desain Parabot.

GangsaParabot· 2020

Dond Meja Randah

dek Jinyang Koo

Klien: Wuui

Pamenang A' Design Award Gangsa dalam Kategori Parabot

17,948

Pamenang Pangharogaan Taverifikasi

Verifikasi Status Pangharogaan untuak #88288

Kunjungi Situs Caliak di A' Design Award Siaran Pers Lencana Penghargaan

Warno

Desain

Tantang Dond Meja Randah

Naratif rancangan Dond adolah kasadohanaan namun serbagunoa. Komponen panyambung nan sadohanoa dibuek manggunoan printer 3D, jo rancangan bagian nan minimalis agar konsumen dapek mamudahkan marakik meja atau mambongkaknyo untuak dibao pado wakatu pangangkutan. Tujuan perancang adolah agar Dond dapek mamenohi kabutuahan sahari-hari konsumen untuak manikmati gaya hiduik nan labiah mudah untuak babarapo kasampatan, baiak di dalam rumah mau pun di lua. Dond manggunoan pandekatan rancangan nan langsuang sarupo permukaan ateh nan indak malakaik pado kaki-kakinyo dan dapek mudah diangkek untuak diagiah sabagai nampan.

Pangakuan

Tantang A' Design Award Gangsa

Dond Meja Randah adolah pamenang A' Design Award Gangsa, sabuah pangakuan nan sangaik bapresti nan dibarikan ka rancangan nan cemerlang nan dicirikan dek kreativitas, kacerdikan jo kabijaksanaan. Pamenang Gangsa adolah karya nan cukuik mahir jo kreatif sacaro mangesankan nan mamastikan pangalaman nan luas, imajinasi jo kacerdikan parancangnyo. Dond Meja Randah dipaokan manjadi bando nan sangaik dihormati, dikagumi jo disayangi, nan profesional jo inovatif sacaro nampak. Rancangan nan manang Gangsa iko mamuek praktik tabaik dalam seni, ilimu, rancangan jo teknologi jo cemerlang dalam parhatian ka rincian. Dond Meja Randah mamanuhi kaparluan jo elok, manyantuah karinduan, mamikaik parasaan jo manarik raso ingin tahu.

Di Baliak Desain

Kit Pers

Kredit, anggota tim jo rincian teknis nan disadioan dek perancang.

Sifat Unik: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
Dimensi & Kemasan: Top: 330mmx330mmx15mm
Overall Height: 415mm
Tag: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
Teknologi Produksi: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
Tantangan Desain: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
Penelitian: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
Inspirasi: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
Durasi Proyek: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
Alua Operasi: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
Anggota Tim: JINYANG KOO