Arch Kadera, Kadera Indak Basandaran dek Edvard Glazebrook

Arch Kadera, Kadera Indak Basandaran dek Edvard Glazebrook adolah pamenang nan sangaik tahormat dari A' Design Award Gangsa 2021 nan sangaik prestigius dalam Kategori Kompetisi Desain Parabot.

GangsaParabot· 2021

Arch Kadera, Kadera Indak Basandaran

dek Edvard Glazebrook

Pamenang A' Design Award Gangsa dalam Kategori Parabot

11,198

Pamenang Pangharogaan Taverifikasi

Verifikasi Status Pangharogaan untuak #106853

Caliak di A' Design Award Siaran Pers Lencana Penghargaan

Warno

Desain

Tantang Arch Kadera, Kadera Indak Basandaran

Arch marupokan kadera jo tampek duduak indak basandaran nan dibuek dari kayu pinus laminasi nan diukia sarato diwarnoi hitam. Rancangan iko didasari dek bantuak nan sadarhano jo baulang, nan mambari furnitur ko ekspresi nan homogen jo logis. Limo lengkuang nan samo bantuaknyo mambantuak kaki jo sandaran kadera, sadangkan tampek duduak nan indak basandaran dibuek dari tigo satangah lengkuang nan basuo di tangah. Kasadonyo bagian dipotong dari papan kayu laminasi jo mesin CNC router, kudian dilem sarato disambuang jo pasak kayu. Lengkuang-lengkuang tu mampakuek furnitur di bagian-bagian nan paliang lamah.

Pangakuan

Tantang A' Design Award Gangsa

Arch Kadera, Kadera Indak Basandaran adolah pamenang A' Design Award Gangsa, sabuah pangakuan nan sangaik bapresti nan dibarikan ka rancangan nan cemerlang nan dicirikan dek kreativitas, kacerdikan jo kabijaksanaan. Pamenang Gangsa adolah karya nan cukuik mahir jo kreatif sacaro mangesankan nan mamastikan pangalaman nan luas, imajinasi jo kacerdikan parancangnyo. Arch Kadera, Kadera Indak Basandaran dipaokan manjadi bando nan sangaik dihormati, dikagumi jo disayangi, nan profesional jo inovatif sacaro nampak. Rancangan nan manang Gangsa iko mamuek praktik tabaik dalam seni, ilimu, rancangan jo teknologi jo cemerlang dalam parhatian ka rincian. Arch Kadera, Kadera Indak Basandaran mamanuhi kaparluan jo elok, manyantuah karinduan, mamikaik parasaan jo manarik raso ingin tahu.

Di Baliak Desain

Kit Pers

Kredit, anggota tim jo rincian teknis nan disadioan dek perancang.

Sifat Unik: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimensi & Kemasan: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Tag: Wood, Chair, Stool, Pine wood, Arches, Curve
Teknologi Produksi: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Tantangan Desain: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Penelitian: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspirasi: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Durasi Proyek: The project started in march 2020 - and finished in late May 2020.
Alua Operasi: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Paten: Copyrights belong to Edvard Glazebrook, 2020
Anggota Tim: Edvard Glazebrook