Horizontal Long Mesh Fitoeran'ny Fatana nataon'i Shigeru Yamada

Ny endrika Horizontal Long Mesh Fitoeran'ny Fatana nataon'i Shigeru Yamada dia mpandresy sarobidy amin'ny 2024 A' Design Award Volafotsy amin'ny Sokajin'ny Fifanintsanana Famolavolana Fitaovana Toby ary Fitaovana Ivelany.

VolafotsyFitaovana Toby· 2024

Horizontal Long Mesh Fitoeran'ny Fatana

nataon'i Shigeru Yamada

Mpanjifa: Norinori Life

Mpandresy A' Design Award Volafotsy amin'ny Sokajy Fitaovana Toby

164,851

Mpandresy Loka Voamarina

Hanamarina ny Sata Loka ho an'ny #153103

Tsidiho ny Tranonkala Jereo ao amin'ny A' Design Award Fanambarana ho an'ny Mpanao Gazety Marika Loka

Loko

Ny Endrika

Momba ny Horizontal Long Mesh Fitoeran'ny Fatana

Raha manimba ny ahitra sy ny tany ny afo misokatra, ity vokatra maivana sy mirindra misy rafitra vy tsy misy harafesina ary harato miondrika ity dia mamela anao hankafizinao amin'ny fatana amin'ny toerana isan-karazany nefa tsy mampielezana lavenona na tsipon'afo manodidina ny tontolo iainana. Ny rafitra manana patanty any Japana dia mamela ny lelafo hitsofoka amin'ny harato amin'ny alina, ary mamela anao hijery ny hazo miova ho lavenona moramora.

Ny Fankasitrahana

Momba ny A' Design Award Volafotsy

Nandresy ny A' Design Award Volafotsy ny famolavolana Horizontal Long Mesh Fitoeran'ny Fatana, fankasitrahana malaza be omena ny famolavolana ambaratonga ambony, tsara tarehy ary mahavariana. Ny mpandresy Volafotsy dia asa mamirapiratra dia mamirapiratra ary mamorona dia mamorona izay maneho ny fahaizana, ny talenta ary ny fahamaotinan-tsain'ny mpamolavola azy. Andrasana ho asa mahagaga, ohatra tsara, mahay amin'ny asa ary vaovao amin'ny halalin-tsaina ny famolavolana Horizontal Long Mesh Fitoeran'ny Fatana. Ity famolavolana nandresy ny A' Design Award Volafotsy ity dia fikarohana miavaka be ary ankafizina izay mahasoa ary mampandroso ny sisintanin'ny zavakanto, ny siansa, ny famolavolana ary ny teknolojia. Ny famolavolana Horizontal Long Mesh Fitoeran'ny Fatana dia famoronana mahazo fitaka be izay mamaly ny faniriana, mitondra fihetseham-po tsara ary mamelona fahagagana sy fahatalanjonana.

Ao Ambadiky ny Endrika

Fitaovana ho an'ny Mpanao Gazety

Fankasitrahana, mpikambana ao amin'ny ekipa ary antsipiriany teknika nomen'ny mpanao endrika.

Toetra Manokana: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Refy & Fonosana: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Marika: Outdoor, Camping, Bonfire
Teknolojia Famokarana: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Fanamby Endrika: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Fikarohana: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Aingam-panahy: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Faharetan'ny Tetikasa: This product was launched in Japan on September 1, 2021
Fizotr'asa: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Patanta: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Mpikambana ao amin'ny Ekipa: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Loharanon-tsary: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.