Carbon Activated Timber Bench Sols — Michael Budig and Kenneth Tracy

Darbs Carbon Activated Timber Bench Sols, kura autors ir Michael Budig and Kenneth Tracy, ir augsti novērtēts un ļoti prestižās 2020 Bronzas balva A' Design Award ieguvējs kategorijā Ilgtspējīgu produktu, projektu un zaļais dizains.

BronzasIlgtspējīgs produkts· 2020

Carbon Activated Timber Bench Sols

Autors: Michael Budig and Kenneth Tracy

Klients: Singapore University of Technology and Design

Bronzas balva A' Design Award ieguvējs kategorijā Ilgtspējīgs produkts

24,106

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #89216

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Carbon Activated Timber Bench Sols

Oglekļa šķiedru koka sols ir projektēts publiskām vietām un izgatavots no atgūtām koka dēļiem. Tas izaicina priekšstatus par svaru un stabilitāti. Lai gan koka dēļu apjoms izskatās kā šķietami masīvi bloki, tie ir tikai vaļīgi savienoti un atrodas nestabilā stāvoklī. Sīki oglekļa šķiedru pavedieni sasien masīvos blokus kopā, piešķirot tiem stabilitāti. Tie arī pastiprina blokus un pat vēl palielina koka dēļu izturību.

Atzinība

Par Bronzas balva A' Design Award

Carbon Activated Timber Bench Sols ir Bronzas balvas A' Design Award ieguvējs, ļoti prestiža atzinība, ko piešķir izciliem dizainiem, kas izceļas ar radošumu, atjautību un viedumu. Bronzas ieguvēji ir pietiekami prasmīgi un pārsteidzoši radoši darbi, kas apliecina to dizaineru plašo pieredzi, iztēli un izdarību. Sagaidāms, ka Carbon Activated Timber Bench Sols būs augsti vērtēts, apbrīnots un cienīts priekšmets, ievērojami profesionāls un inovatīvs. Šis ar Bronzas balvu apbalvotais dizains iekļauj labāko praksi mākslā, zinātnē, dizainā un tehnoloģijās un izceļas ar uzmanību detaļām. Carbon Activated Timber Bench Sols lieliski apmierina vajadzības, skar vēlmes, valdzina jūtas un piesaista zinātkāri.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: The bench uses reclaimed wood planks that through their re-application continue to store carbon, since the living trees absorb CO2 from the environment. The re-use of the wood hence contributes to a positive ecological balance. Carbon is re-combined with the wood in a different state, as minimal amounts of high tech fibres that are strategically placed to enhance the capacity of the wood planks.
Izmēri un iepakojums: Dimensions: 3000 x 830 x 400 mm
Volume: 0.1736 m3
Mass: 128 kg of reclaimed hardwood from outdoor deckings
Carbon fibers, total mass: 0.623 kg (around 800m of 12k carbon fibre tow)
Birkas: Reclaimed wood, carbon fibres, robotic milling, traditional crafts
Ražošanas tehnoloģija: The bench reflects craftsmanship in a contemporary context, where computational design and fabrication have become state of the art. After stacking reclaimed wood planks into solid blocks, an industrial robotic arm mills the blocks into their final geometries with paths for the subsequent reiforcement with fibres. The reclaimed wood planks store carbon and contribute to a positive ecological balance, whereas carbon is re-combined as minimal amounts of high tech fibres, strategically placed to enhance the capacity of the wood planks.
Dizaina izaicinājums: Reclaimed wood simultaneously diverts waste and reduces the energy by forgoing the effort needed to obtain virgin materials. The finishing and fabrication contribute to making a durable, robust piece of furniture sequestering carbon for longer and reducing the need for replacements. Finally augmenting the performance of wood beyond its inherent structural capacity increases the potential range of use so it can be used differently for both industrial design and architecture.
Pētījums: The bench design highlights the expertise present in large-scale furniture carpentry in a combination of experienced labor with new forms of craft, digital calibration and robotic fabrication. By augmenting the reclaimed wood with carbon fibers, the project proves that small amounts of high-performance materials can be used alongside carbon-negative wood elements. This new design direction increases productivity and sustainability through the use of new design and manufacturing technologies.
Iedvesma: Juxtaposing old, weathered hardwood with precise smooth carving and high-tech carbon fiber gives the piece a unique character. This novel expression fuses high tech carving, patina, natural wood grain, digitally designed weaving patterns and precise manufacturing. This points towards an optimized, calibrated future of sustainable design and recalls vernacular traditions of textile and wood construction. Lashing, wood joinery and timber frames act as both cultural and technological precedents.
Projekta ilgums: Conversations started in late December 2016, and the design was completed in November 2018 and installed on the grounds of Mapletree Business City 2, Singapore
Darbības plūsma: Initiated by the opportunity to reuse wood decking boards the project leverages high performance materials and new techniques to renew the old materials and create a sustaining piece of furniture. An elongated pattern of tightly wound carbon fiber strands rest within robotically carved groves to hold the massive stack of blocks together. Precise, continuous curvature combined with tapered edges form a comfortable low-profile object that looks lightweight despite being 140kg
Komandas dalībnieki: Principal Designer: Michael Budig
Principal Designer: Kenneth Tracy
Sachin Gupta
Kerine Kua
Dhileep Kumar
Lee Le Xiu Jean
Melissa Lee Wen Hui
Seah Jia Neng
Daniel Yong Kaijie
Robotic Fabricator: Singapore Composite Cluster
Wood Fabricator: Hon Nam Lee
Attēlu autori: Michael Budig and Kenneth Tracy, Singapore University of Technology and Design