Vista EY2T Motorizēta biometriskās identifikācijas kamera — Chris Dopp & Travis Baldwin

Darbs Vista EY2T Motorizēta biometriskās identifikācijas kamera, kura autors ir Chris Dopp & Travis Baldwin, ir augsti novērtēts un ļoti prestižās 2015 Sudraba balva A' Design Award ieguvējs kategorijā Drošības, aizsardzības un videonovērošanas produktu dizains.

SudrabaDrošības produkti· 2015

Vista EY2T Motorizēta biometriskās identifikācijas kamera

Autors: Chris Dopp & Travis Baldwin

Klients: Vista Imaging and Crea Inc Design LTD

Sudraba balva A' Design Award ieguvējs kategorijā Drošības produkti

25,961

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #40052

Apmeklēt vietni Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Vista EY2T Motorizēta biometriskās identifikācijas kamera

Vista EY2T ir motorizēta biometriskās identifikācijas kamera, kas paredzēta varavīksnenes un sejas atpazīšanai. Ierīce skenē redzamības lauku, meklējot sejas, pēc tam motori pagriež kameru, lai tā tiktu vērsta tieši uz acīm. Plaši izkliedēti infrasarkanie LED un autofokusa sistēma nodrošina uzņemšanu attālumā no 3 līdz 6 pēdām, tāpēc manuāla mērķēšana nav nepieciešama. Deviņi priekšējie sensori ir apvienoti aiz vienotas melnas virsmas, bet cilindriskā, tabletei līdzīgā forma ar noapaļotiem galiem rada mierīgu un nedraudīgu izskatu. Kameru var izmantot autonomi vai kopā ar sienas stiprinājumu.

Atzinība

Par Sudraba balva A' Design Award

Vista EY2T Motorizēta biometriskās identifikācijas kamera ir Sudraba balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir augstākās klases, krāšņiem un iespaidīgiem dizainiem. Sudraba ieguvēji ir ārkārtīgi spožas un ļoti radošas izpausmes, kas parāda to dizaineru izcilo kompetenci, talantu un asredzību. Sagaidāms, ka Vista EY2T Motorizēta biometriskās identifikācijas kamera būs lielisks, paraugdarbs, ļoti profesionāls un dziļi inovatīvs. Šis ar Sudraba balvu apbalvotais dizains ir ievērojams, apbrīnots izgudrojums, kas palīdz paplašināt mākslas, zinātnes, dizaina un tehnoloģiju robežas. Vista EY2T Motorizēta biometriskās identifikācijas kamera ir radījums, kam daudzi apskauž, kas modina vēlmes, rada pozitīvas izjūtas un raisa izbrīnu un apbrīnu.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Izmēri un iepakojums: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Birkas: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Ražošanas tehnoloģija: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Dizaina izaicinājums: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Pētījums: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Iedvesma: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Projekta ilgums: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Darbības plūsma: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Komandas dalībnieki: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Attēlu autori: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015