Pāriet uz saturu
Etile Fotoelektriskais jumta dakstiņš — Jaroslaw Markowicz

Darbs Etile Fotoelektriskais jumta dakstiņš, kura autors ir Jaroslaw Markowicz, ir augsti novērtēts un ļoti prestižās 2020 Sudraba balva A' Design Award ieguvējs kategorijā Būvmateriālu un būvkomponentu dizains.


SudrabaBūvkomponenti· 2020

Etile Fotoelektriskais jumta dakstiņš

Autors: Jaroslaw Markowicz

Klients: Electrotile

Sudraba balva A' Design Award ieguvējs kategorijā Būvkomponenti

33,185

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #103293

Krāsas

Dizains

Par Etile Fotoelektriskais jumta dakstiņš

Etile ir fotoelektrisks metāla jumta dakstiņš, kas paredzēts izmantošanai dažādu veidu ēkās. Katrs modulis balstās uz tradicionālu cinkota tērauda jumta dakstiņu un satur piecus mikro fotoelektriskos paneļus, kas ražo elektroenerģiju. Moduļu izmēri ir 1200 x 360 x 30 milimetri, un tie tiek savienoti kopā tāpat kā parastie jumta dakstiņi, kabeļu savienojumus paslēpjot zem jumta apšuvuma. Elektrolīnija ir pieslēgta ēkas elektrotīklam. Tērauda paneli produkta kalpošanas laika beigās var atdalīt. Etile pievieno enerģijas ražošanu, nemainot jumta konstrukciju.

Atzinība

Par Sudraba balva A' Design Award

Etile Fotoelektriskais jumta dakstiņš ir Sudraba balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir augstākās klases, krāšņiem un iespaidīgiem dizainiem. Sudraba ieguvēji ir ārkārtīgi spožas un ļoti radošas izpausmes, kas parāda to dizaineru izcilo kompetenci, talantu un asredzību. Sagaidāms, ka Etile Fotoelektriskais jumta dakstiņš būs lielisks, paraugdarbs, ļoti profesionāls un dziļi inovatīvs. Šis ar Sudraba balvu apbalvotais dizains ir ievērojams, apbrīnots izgudrojums, kas palīdz paplašināt mākslas, zinātnes, dizaina un tehnoloģiju robežas. Etile Fotoelektriskais jumta dakstiņš ir radījums, kam daudzi apskauž, kas modina vēlmes, rada pozitīvas izjūtas un raisa izbrīnu un apbrīnu.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības
Electrotile is going to offer photovoltaic steel tiles together with the rest of PV equipment and installation service unlike current suppliers of roof integrated PV. The modular, easy-to-use product allows it to be delivered to almost any type of building.
Izmēri un iepakojums
1200mm x 360mm x 30mm
Birkas
Bipv, Photovoltaic, Solar, Solar roof, Green Energy, Architecture
Ražošanas tehnoloģija
the design of the etile is based on metal roof tiles, a traditional solution based on galvanized steel has created an easily available product. Each individual module has 5 micro photovoltaic panels that generate energy. The steel panel can be easily separated, which is extremely important for the product life cycle.
Dizaina izaicinājums
Our company has been collecting experience in photovoltaics by installing panels on roofs. Most of the insides came from our customers who complained about the poor aesthetics and the mismatch of the size of the panels to the roof. The design challenge was available solutions that would be quick to install, available cheap and aesthetically.
Pētījums
the roofing sheet project was a research and development project during which many tests were carried out. During the design process, we were testing various panel sizes, material connectrions and overal look of product on the building.
Iedvesma
Traditional photovoltaic panels often look unsightly on the building, their large size does not allow for an exact fit to the roof body. We wanted to propose a solution which would look good on the building and not stand out from traditional roof tiles.
Projekta ilgums
the project was developed in Warsaw. Conceptual work lasted from september 2016. After many prototypes and tests, the project was finally implemented in January 2020.
Darbības plūsma
The modules are connected together in the same way as ordinary roof tiles. The only element distinguishing Etile are cable connections, which are hidden under the roof sheathing. As in the case of a solar installation, the power line is connected to the home power grid.
Komandas dalībnieki
Paweł Wujek
Daniel Ziomek

Sponsorēts

Izpētiet ārpus Designers.org

Atklājiet produktus, pakalpojumus un iespējas no mūsu reklāmas partneriem.

Labs dizains ir pelnījis izcilu atzinību

A' Design Award ir starptautiska, žūrijas vērtēta atzinība par labu dizainu. Piedalieties A' Design Award, lai iegūtu iespēju saņemt meritokrātisku atzinību, gūt slavu, prestižu un publicitāti savam darbam. Nominējiet savu darbu A' Design Award un sacenšaties par ilgoto A' Design Prize balvu.

Nominēt