Fortex Darbo batai – autorius Vincent Blais

Darbas Fortex Darbo batai, kurio autorius Vincent Blais, yra itin vertinamas prestižinio 2026 Sidabrinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Apsauginių drabužių ir asmeninės apsaugos priemonių dizainas.

SidabrinisApsaugos priemonės· 2026

Fortex Darbo batai

Dizaineris: Vincent Blais

Klientas: Royer

Kategorijos Apsaugos priemonės laimėtojas – Sidabrinis apdovanojimas A' Design Award

21,380

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #182037

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Fortex Darbo batai

„Fortex“ – tai vandeniui atsparus apsauginis batas, sukurtas didelės rizikos pramoninėms aplinkoms, kuriose susiduriama su cheminėmis medžiagomis, smūgio pavojumi ir mechaniniu stresu. Jo naujovė – cheminis bendrojo formavimo procesas, kuris sujungia termoplastinio poliuretano komponentus su įpurškiamu poliuretano pagrindu, suformuojant vientisą struktūrą be klijų. Integruoti elementai apima padikaulio apsaugą, šoninę kulkšnies apsaugą ir sustiprintą kulno atramą. Konstrukcija užtikrina atsparumą vandeniui, cheminėms medžiagoms, angliavandeniliams, pradūrimui ir slydimui, tuo pačiu išliekant lengva, ergonomiška ir termiškai efektyvi.

Pripažinimas

Apie Sidabrinis apdovanojimas A' Design Award

Fortex Darbo batai laimėjo Sidabrinį apdovanojimą A' Design Award, nepaprastai prestižinį pripažinimą, skiriamą aukščiausios klasės, puikiems ir įspūdingiems dizainams. Sidabro laureatai yra itin puikūs ir labai kūrybingi darbai, rodantys jų kūrėjų išskirtinę kompetenciją, talentą ir įžvalgumą. Tikimasi, kad Fortex Darbo batai bus nuostabus, pavyzdinis, labai profesionalus ir giliai novatoriškas kūrinys. Šis Sidabriniu apdovanojimu įvertintas dizainas yra žymus, žavimas išradimas, padedantis plėsti meno, mokslo, dizaino ir technologijų ribas. Fortex Darbo batai yra kūrinys, kuriam daugelis pavydi, žadinantis troškimus, teikiantis teigiamų jausmų ir sukeliantis nuostabą bei stebėjimąsi.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: Engineered to redefine industrial performance, this boot features a quad-density co-injection system fusing PU and TPU into one seamless chassis. Anatomically mapped zones deliver lightweight shock absorption and targeted protection at key impact areas. A rigid heel stabilizes the foot on uneven terrain, while specialized outsoles ensure grip in extreme conditions. Cement-free bonding forms a waterproof, monolithic structure built for lasting durability and safety.
Matmenys ir pakuotė: Product Dimensions (1 boot, size 42): 310 mm x 120 mm x 400 mm (height)
Package: 510 mm x 355 mm x 140 mm
Žymos: Co-injected Footwear, TPU Reinforcement, Polyurethane Safety Boot, Cold Weather Protection, Ankle protection, Metatarsal Protection, Industrial Design, Injection Molding Innovation, Chemical Bonding, Work Boot
Gamybos technologija: This safety boot is engineered through co-injection molding, chemically bonding high-density TPU reinforcement with a lightweight PU core to form a seamless, monolithic structure free from adhesives and delamination. Developed for sub-zero climates, the TPU formulation maintains elasticity at -40°C, ensuring impact resistance without brittleness. Precision tooling guarantees exact reinforcement placement, delivering targeted protection, thermal stability, and durability without added bulk.
Dizaino iššūkis: The principal challenge was achieving reliable co-molding between TPU and a PU base, ensuring sufficient bonding strength in the metatarsal insert located within the boot’s primary flex zone. This required rethinking rotary-injection machine & tooling: a system allowing a pre-molded TPU insert to seat in an articulated receiver moving in frontal-transverse planes before mold closure and PU injection. Constraints included production feasibility, material behavior, wearer comfort and international safety standard requirements.
Tyrimas: This applied industrial research explored polymer chemistry and precision engineering to eliminate adhesion failure and cold embrittlement in safety footwear. Using iterative prototyping and destructive testing, high-density TPU was co-injected with a cellular PU core to form a monolithic structure. Hundreds of bonding and sub-zero wear tests led to a cement-free boot with permanent molecular fusion, zero delamination, and full CSA, ASTM, and EN/ISO compliance.
Įkvėpimas: This project merges heritage craftsmanship with advanced material science, transforming traditional footwear into an integrated high-performance system with protection embedded in its structural DNA. Inspired by biological exoskeletons, it acts as both protective shell and load-bearing frame. Rib-cage inspired arch geometry in the metatarsal zone disperses impact while preserving flexibility, creating a biomimetic system balancing safety and ergonomic performance.
Projekto trukmė: Designing started in Sherbrooke, Quebec, Canada in Dec. 2023. Engineering started in Legnaro, Padova, Italy in September 2024 with GGS, an elite Italian mold-making partner lead by M. Roberto Gobbato.
Veikimo eiga: This safety boot functions as a flexible exoskeleton, flexing at the forefoot while stabilizing the heel. TPU reinforcements shield the metatarsal area and ankle from impact without limiting movement. Unlike cemented footwear, its PU and TPU components are co-injected and chemically fused into a single monolithic structure, eliminating delamination. Built for harsh industrial and cold environments, it delivers long-term durability, reliability, and consistent performance.
Patentai: Protective Toecap & Puncture-resistant Sole
(CSA Z195-14) Certified grade 1 protective toecap that withstands impacts up to 125 joules and certified puncture-resistant sole that withstands at least 1200 Newtons (270pounds)

Electric-shock Protection
(CSA Z195-14) Certified electric-shock protection (18 kV / 60 Hz / 1 minute)

Metatarsal Protection
(CSA Z195-14) Certified metatarsal protection that can withstand impacts up to 101.7 joules

Protective Toecap Impact and Compression Resistance
(ASTM F2413-24) Certified protective toecap that can withstand an impact of 75 ft-lbf (~100 Nm) and a compression of 2500lbs (~1135KG).

Puncture-resistant Sole
(ASTM F2413-24) Certified puncture-resistant sole that can withstand a force load of 270 lbf (1200 N)

Metatarsal Protection
(ASTM F2413-24) Certified metatarsal protection that can withstand an impact of 75 ft-lbf (~100 Nm)

Electric Hazard Protection
(ASTM F2413-24) Certified electric-shock protection (18 kV/ 60 Hz / 1 minute)

Slip Resistant Sole
(ASTM F2413-24) Certified slip-resistant footwear with a coefficient of friction (CoF) of no less than 0.40 on dry and wet quarry tile
Komandos nariai: Footwear Developer/Designer: Vincent Blais
Design Associate: Loïc Girard
Executive Director - Innovation: Francis Lacroix

DEVELOPING PARTNERS:
Equipment and Testing: Felice Scarnera & Benedetto Scarnera from SFB Srl (Italy)
Master Moldmaker: Roberto Gobbato – GGS (Italy)
Material and Chemistry: ELACHEM (Italy)
Int'l team coordinator: Alexandra Dombrovska (Italy)