Oak Konan Shinagawa Biurų pastatas – autorius Obayashi Corporation

Darbas Oak Konan Shinagawa Biurų pastatas, kurio autorius Obayashi Corporation, yra itin vertinamas prestižinio 2023 Sidabrinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Architektūros, pastatų ir konstrukcijų dizainas.

SidabrinisArchitektūra· 2023

Oak Konan Shinagawa Biurų pastatas

Dizaineris: Obayashi Corporation

Klientas: Obayashi-Shinseiwa Real Estate Corporation

Kategorijos Architektūra laimėtojas – Sidabrinis apdovanojimas A' Design Award

18,291

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #149620

Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Oak Konan Shinagawa Biurų pastatas

Oak Konan Shinagawa – tai 12 aukštų biurų pastatas, esantis netoli uosto Tokijuje, Japonijoje. Baltas, grotelių pavidalo išorinis karkasas yra iš surenkamojo gelžbetonio pagamintas išorinis apvalkalas, kuris atlieka ir konstrukcinio karkaso, ir apsaugos nuo saulės funkcijas. Kartu su plienine branduolio konstrukcija ši hibridinė struktūra sukuria biurų erdvę be kolonų, leidžiančią lanksčiai planuoti išdėstymą. Surenkamosios kolonos ir sijos gaminamos ne statybvietėje ir nuleidžiamos į vietą iš viršaus, o tai supaprastina darbus statybvietėje. Išoriniuose languose įrengti natūralios ventiliacijos elementai, atidaromi nuimama rankena.

Pripažinimas

Apie Sidabrinis apdovanojimas A' Design Award

Oak Konan Shinagawa Biurų pastatas laimėjo Sidabrinį apdovanojimą A' Design Award, nepaprastai prestižinį pripažinimą, skiriamą aukščiausios klasės, puikiems ir įspūdingiems dizainams. Sidabro laureatai yra itin puikūs ir labai kūrybingi darbai, rodantys jų kūrėjų išskirtinę kompetenciją, talentą ir įžvalgumą. Tikimasi, kad Oak Konan Shinagawa Biurų pastatas bus nuostabus, pavyzdinis, labai profesionalus ir giliai novatoriškas kūrinys. Šis Sidabriniu apdovanojimu įvertintas dizainas yra žymus, žavimas išradimas, padedantis plėsti meno, mokslo, dizaino ir technologijų ribas. Oak Konan Shinagawa Biurų pastatas yra kūrinys, kuriam daugelis pavydi, žadinantis troškimus, teikiantis teigiamų jausmų ir sukeliantis nuostabą bei stebėjimąsi.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
Matmenys ir pakuotė: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Žymos: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Gamybos technologija: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Dizaino iššūkis: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Tyrimas: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Įkvėpimas: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Projekto trukmė: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Veikimo eiga: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Komandos nariai: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Nuotraukų autoriai: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022