The Flett Stogo apskarda – autorius Scott Flett

Darbas The Flett Stogo apskarda, kurio autorius Scott Flett, yra itin vertinamas prestižinio 2023 Geležinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje 3D spausdintų formų ir produktų dizainas.

Geležinis3D spausdinimas· 2023

The Flett Stogo apskarda

Dizaineris: Scott Flett

Klientas: Scott Flett Architecture Workshop.

Kategorijos 3D spausdinimas laimėtojas – Geležinis apdovanojimas A' Design Award

35,604

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #141650

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie The Flett Stogo apskarda

„Flett“ yra stogo apskarda, skirta stačių sandūrų architektūrinei dailylentei. Apskarda gaminama 3D spausdinimo būdu iš ASA plastiko, jos matmenys – 265 x 50 x 100 milimetrų, o storis – 2 milimetrai. Forma po vienu dailylentės lakštu užsikiša, leidžia pakeisti kryptį, o tada užsidengia ant kito lakšto. Detalė pritaikyta pagal stogo dangos lakšto profilį ir spalvą, o medžiaga yra termiškai stabili, atspari UV spinduliams ir netoksiška. Apskardą gali nuosekliai montuoti bendrieji statybininkai, siekiant sumažinti nuotėkius sudėtingose stogo sandūrose.

Pripažinimas

Apie Geležinis apdovanojimas A' Design Award

The Flett Stogo apskarda laimėjo Geležinį apdovanojimą A' Design Award, prestižinį pripažinimą, skiriamą geriems dizainams, atitinkantiems profesinius ir pramoninius reikalavimus, kurių tikimasi iš gerai suprojektuotų kūrinių. Geležies laureatai rodo didelius kūrėjų įgūdžius, aukštą specializaciją, ekspertinį supratimą ir kūrybinį gebėjimą. Tikimasi, kad The Flett Stogo apskarda bus aukštai vertinamas, žavimas ir brangus kūrinys, praktiškas ir novatoriškas. Šis Geležiniu apdovanojimu įvertintas dizainas integruoja geriausias pramonės praktikas ir turi kompetentingas technines savybes, susietas su patirtimi ir talentu. The Flett Stogo apskarda gerbiamas už kruopštumą ir sukurtas taip, kad gerintų gyvenimo kokybę ir padėtų padaryti pasaulį geresne vieta.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
Matmenys ir pakuotė: 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile.
Žymos: roof, flashing, roof flashing, 3d print, 3d printing, additive forming
Gamybos technologija: The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent.
Dizaino iššūkis: Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
Tyrimas: The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem.
Įkvėpimas: Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
Projekto trukmė: The project started on January 2017 and is ongoing.

The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.

The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.

I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'.
Veikimo eiga: I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.

The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations.
Patentai: Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop

Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728
Komandos nariai: Scott Flett
Nuotraukų autoriai: Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo