Waterlight Lempa – autorius Jiahua Zhang, Nitesh Reddy and Kejun Li

Darbas Waterlight Lempa, kurio autorius Jiahua Zhang, Nitesh Reddy and Kejun Li, yra itin vertinamas prestižinio 2021 Bronzinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Apšvietimo produktų ir šviestuvų dizainas.

BronzinisApšvietimas· 2021

Waterlight Lempa

Dizaineris: Jiahua Zhang, Nitesh Reddy and Kejun Li

Kategorijos Apšvietimas laimėtojas – Bronzinis apdovanojimas A' Design Award

12,971

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #106626

Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Waterlight Lempa

Waterlight yra stalinė lempa, įkvėpta vandens čiaupo. Sukant valdymo svirtį į viršų ir žemyn, kinta šviesos ryškumas. Sukant valdymo svirtį iš kairės į dešinę, reguliuojama spalvos temperatūra. Du potenciometrai, esantys rutulio viduje – vienas horizontalus, kitas vertikalus – keičia įėjimo įtampą, taip sukuriant šiuos efektus. Šviesą skleidžia LED elementai, įmontuoti pagrinde. Galvutė pagaminta iš bronzos, viršutinis dangtelis – iš natūralaus marmuro, o išorinis korpusas – iš stiklo. Apatiniame dangtelyje sumontuota belaidžio įkrovimo grandinė, todėl lempą galima nešiotis iš kambario į kambarį.

Pripažinimas

Apie Bronzinis apdovanojimas A' Design Award

Waterlight Lempa laimėjo Bronzinį apdovanojimą A' Design Award, labai prestižinį pripažinimą, skiriamą išskirtiniams dizainams, kuriuos žymi kūrybiškumas, išradingumas ir sumanumas. Bronzos laureatai yra pakankamai įgudę ir stulbinamai kūrybingi dirbiniai, patvirtinantys jų kūrėjų didelę patirtį, vaizduotę ir išteklių gausą. Tikimasi, kad Waterlight Lempa bus aukštai vertinamas, žavimas ir brangus daiktas, žymiai profesionalus ir novatoriškas. Šis Bronziniu apdovanojimu įvertintas dizainas įtraukia geriausias praktikas mene, moksle, dizaine ir technologijose ir yra puikus dėl dėmesio detalėms. Waterlight Lempa puikiai tenkina poreikius, paliečia troškimus, žavi jausmus ir traukia smalsumą.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: Waterlight generates a unique and amazing experience of light control. Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Matmenys ir pakuotė: Dimensions: Width 80mm x Depth 80 mm x Height 300 mm.
Technical Properties: The potentiometer is the bridge between the action from the user and the effect of the lamp. It changes the brightness and temperature of the lamp by modifying the input voltage which is controlled by the user through the control bar.
Žymos: Light, Aesthetic, Water, Faucet, Lamp, Desktop
Gamybos technologija: The head is fixed with two potentiometers inside the sphere, one is horizontal and the other is vertical. Thus, when the user is turning the control bar up and down, the horizontal potentiometer changes the voltage of the electricity to adjust the brightness of the light; when the user is rolling the control bar left and right, the vertical potentiometer changes the voltage of the electricity to modify the temperature of the light.

The light is provided by the LED cells on a base.

For charging, the bottom lid is integrated with a circuit for wireless charging when it is put on the independent wireless charger that is connected to plugs with wire. The lamp can be taken away after charging (e.g. the lamp is charged in the living room when the user is reading there and taken to the bedroom when the user wants to go there).

The head is made of high-quality bronze, the top lid is made of natural marble. And the outer shell is made of glass.
Dizaino iššūkis: The biggest challenge was to build the functional potentiometer and circuit to make this design into reality. In the beginning, it was really hard to link the control action and the change of the brightness and temperature of the light in a proper way. The change always went too much or too little. Finally, we found the balance and created a perfect control feeling.
Tyrimas: We would like to create an amazing new interaction between the user and the lamp. After a lot of sketches and brainstorming, we came up with this idea and found out that there was not anything like it in the market. So we did five versions of 1:1 scale prototypes to find the best proportion of the shape, enable the potentiometer working, and find the manufacturing process of the marble. It turned out that we need a horizontal and a vertical potentiometer to control the voltage and hence the brightness and temperature of the light. And we found out that the marble can be made by CNC.
Įkvėpimas: Waterlight was inspired by the water faucet which adjusts the volume of water by being turned up and down, and controls the temperature of water by being turned left and right. It enables users to adjust light like using a water faucet, creating a similar feeling between light control and water control, and bringing about more insights into life.
Projekto trukmė: This project started in October 2019 and finished in January 2020 in Milan.
Veikimo eiga: Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Komandos nariai: Nitesh Reddy N
Kejun Li