ຜົນງານ Repose ໜ້າທີ່ຫຼັກ: ເກົ້າອີ້ນັ່ງພັກຜ່ອນ ໂດຍ John G Williams ເປັນຜູ້ຊະນະທີ່ໄດ້ຮັບຄວາມນັບຖືສູງຂອງລາງວັນ 2019 A' Design Award ລະດັບເຫຼັກ ອັນຊົງກຽດໃນໝວດການແຂ່ງຂັນ ການອອກແບບເຟີນິເຈີ.
ເຫຼັກເຟີນິເຈີ· 2019
Repose ໜ້າທີ່ຫຼັກ: ເກົ້າອີ້ນັ່ງພັກຜ່ອນ
ໂດຍ John G Williams
ລູກຄ້າ: John G Williams Fine Furniture
ຜູ້ຊະນະ A' Design Award ລະດັບເຫຼັກ ໃນໝວດ ເຟີນິເຈີ
ຜູ້ຊະນະລາງວັນທີ່ຢັ້ງຢືນແລ້ວ
ຢັ້ງຢືນສະຖານະລາງວັນສຳລັບ #75298ການອອກແບບ
ກ່ຽວກັບ Repose ໜ້າທີ່ຫຼັກ: ເກົ້າອີ້ນັ່ງພັກຜ່ອນ
ຂໍ້ຄວາມປຶ້ມ: Repose ແມ່ນເກົ້າອີ້ນັ່ງພັກຜ່ອນທີ່ເຮັດຈາກໄມ້ເນື້ອແຂງແທ້ໆ. ໂຄງສ້າງເຮັດຈາກໄມ້ Ash ອາເມລິກາ, ສ່ວນບ່ອນນັ່ງແລະພະນັກແອນເຮັດຈາກໄມ້ Walnut ອາເມລິກາ. ບ່ອນນັ່ງທີ່ໂຄ້ງເລິກນັ້ນຖືກສ້າງຂຶ້ນໂດຍການປະສານແຜ່ນໄມ້ທີ່ຖືກຕັດເປັນຮູບຊົງແລະມີຂອບເປັນມຸມ, ເຊິ່ງເປັນຮູບແບບຂັ້ນສູງຂອງວິທີການເຮັດຖັງໄມ້ (coopering) ທີ່ໃຊ້ໃນການສ້າງຖັງໄມ້. ສ່ວນໂຄ້ງດ້ານໃນຖືກຂັດໃຫ້ຮຽບດ້ວຍເຄື່ອງມືສະເພາະທີ່ອອກແບບເອງ, ໃນຂະນະທີ່ສ່ວນເທິງຂອງແຂນເກົ້າອີ້ຍັງຄົງໄວ້ຊຶ່ງໂຄງສ້າງແບບແບ່ງສ່ວນ. ຂາຫຼັງຖືກດັດດ້ວຍໄອນ້ຳ (steam bent) ແລະຊ່ວຍໃຫ້ແຂນເກົ້າອີ້ໝັ້ນຄົງຂຶ້ນ. ຂໍ້ຕໍ່ແບບ Draw Bore Tenon ຖືກນຳໃຊ້ເພື່ອເພີ່ມຄວາມແຂງແຮງ. ຈຸດປະສົງຂອງການອອກແບບແມ່ນເພື່ອໃຫ້ໄດ້ຄວາມສະບາຍທຽບເທົ່າກັບເກົ້າອີ້ຫຸ້ມນວມ ໂດຍໃຊ້ພຽງແຕ່ໄມ້ແທ້ລ້ວນໆ.
ການຮັບຮູ້
ກ່ຽວກັບ A' Design Award ລະດັບເຫຼັກ
Repose ໜ້າທີ່ຫຼັກ: ເກົ້າອີ້ນັ່ງພັກຜ່ອນ ແມ່ນຜູ້ຊະນະ A' Design Award ລະດັບເຫຼັກ ເຊິ່ງເປັນການຍອມຮັບທີ່ມີກຽດສຳລັບການອອກແບບທີ່ດີ ທີ່ຕອບສະໜອງຄວາມຕ້ອງການທາງວິຊາຊີບ ແລະ ອຸດສາຫະກຳທີ່ຄາດຫວັງຈາກຜົນງານທີ່ອອກແບບມາຢ່າງດີ. ຜູ້ຊະນະລະດັບເຫຼັກສະແດງເຖິງທັກສະອັນຍິ່ງໃຫຍ່ ຄວາມຊຳນານສະເພາະສູງ ຄວາມເຂົ້າໃຈຂອງຜູ້ຊ່ຽວຊານ ແລະ ຄວາມສາມາດໃນການສ້າງສັນຂອງຜູ້ສ້າງ. Repose ໜ້າທີ່ຫຼັກ: ເກົ້າອີ້ນັ່ງພັກຜ່ອນ ຖືກຄາດວ່າຈະເປັນຜົນງານທີ່ໄດ້ຮັບການຍົກຍ້ອງສູງ ໜ້າຊົມເຊີຍ ແລະ ເປັນທີ່ຮັກແພງ ທີ່ໃຊ້ງານໄດ້ຈິງ ແລະ ມີນະວັດຕະກຳ. ການອອກແບບທີ່ຊະນະລະດັບເຫຼັກນີ້ລວມວິທີປະຕິບັດທີ່ດີທີ່ສຸດຂອງອຸດສາຫະກຳ ແລະ ມີຄຸນລັກສະນະທາງເຕັກນິກທີ່ມີຄວາມສາມາດ ເຊື່ອມໂຍງກັບຄວາມຮູ້ ແລະ ພອນສະຫວັນ. Repose ໜ້າທີ່ຫຼັກ: ເກົ້າອີ້ນັ່ງພັກຜ່ອນ ໄດ້ຮັບການເຄົາລົບສຳລັບຄວາມລະອຽດຮອບຄອບ ແລະ ຖືກອອກແບບເພື່ອປັບປຸງຄຸນນະພາບຊີວິດ ຊ່ວຍເຮັດໃຫ້ໂລກເປັນບ່ອນທີ່ດີຂຶ້ນ.
ເບື້ອງຫຼັງການອອກແບບ
ຊຸດຂ່າວ
ຂໍ້ມູນ, ສະມາຊິກທີມ ແລະ ລາຍລະອຽດທາງເຕັກນິກທີ່ສະໜອງໂດຍນັກອອກແບບ.
- ຄຸນສົມບັດພິເສດ
- The Repose lounge chair is constructed from solid timber. The curved form is realized by an extreme form of the 'coopering' process - similar to the process used to construct round barrels from staves of timber.
- ຂະໜາດ ແລະ ບັນຈຸພັນ
- W 800, D 800, H 830 mm
Constructed from solid hardwood timber. Frame: American Ash. Seat and Back: American Walnut.
Joints use draw bore tenon joints for extra strength - ແທັກ
- Lounge, chair, wooden, artisanal, Danish, timber, art
- ເຕັກໂນໂລຊີການຜະລິດ
- This chair is not moulded, as some might expect, but is formed from solid timber. The deep sweeping form of the seat is made by laminating various pieces of timber, with angled edges, to form the desired curves. The inside curves are machined into smooth curves with custom made tooling; but the arm uppers retain some of the segmented feel - smooth enough and yet conveying a sense of where the piece came from. The rear legs are steam bent, to retain the overall simplicity, and to attenuate and stabilize the top part of the chair arms. The backrest is also a curved laminated, solid-wood form. It would also be possible to add a thin seat cushion, or perhaps to re-conceive the entire backrest as a custom moulded leather cushion
- ສິ່ງທ້າທາຍດ້ານການອອກແບບ
- The major unknown was how strong the seat section would be in bending - in other words if someone sat on the arms, would they break? It became apparent that the arms would need additional support given the depth of the form, and the inevitable flexibility (despite steps taken to add strength in the manufacturing process). It was found that the support pins at the rear of the arms were sufficient to stabilize the entire form - which was confirmed through trial and error.
Overall the challenge was to create a lounge chair that, despite being solid timber, would be as comfortable as an upholstered equivalent - ການຄົ້ນຄວ້າ
- The method drew heavily on the methods used in earlier designs (eg Zene submitted last year), but took these to extremes to experiment with the art of the possible.
New tooling was developed, in the form of a type of drum sander run between centres on a woodworking lathe, to machine the large concave curves - ແຮງບັນດານໃຈ
- The inspirational question behind Repose was: if the design language at the core of the Beke and Zene dining ranges were extended to lounge furniture, what would that look like? Could a form be created out of beautiful solid hardwood timber that was profoundly comfortable even though it may be challenging to manufacture? Could some sort of modern shell design be crafted out of solid timber to yield a beautiful striking new design ?
- ໄລຍະເວລາໂຄງການ
- The project was designed and the first prototype built in 4 weeks, starting Dec 2018 and completing in Jan 2019 in Johannesburg South Africa. The design was refined and built in finished materials (Ash and Walnut) over the following 4 weeks.
- ຂັ້ນຕອນການດຳເນີນງານ
- The user settles comfortably down into the seat using the armrests.
Various postures are supported sitting comfortably down in the seat.
Getting back out of the seat is very easy, and facilitated by the arms. - ສິດທິບັດ
- UK IPO design registration: 6053688
- ສະມາຊິກທີມ
- John G Williams
- ເຄຣດິດຮູບພາບ
- All images: John G Williams
ໂຄສະນາ
ສຳຫຼວດນອກເໜືອຈາກ Designers.org
ຄົ້ນພົບຜະລິດຕະພັນ, ບໍລິການ ແລະ ໂອກາດຈາກຄູ່ຮ່ວມໂຄສະນາຂອງພວກເຮົາ.
ສຳຫຼວດເພີ່ມເຕີມ
ການອອກແບບທີ່ກ່ຽວຂ້ອງ
ສຳຫຼວດການອອກແບບທີ່ໄດ້ຮັບລາງວັນເພີ່ມເຕີມຈາກໝວດໝູ່ດຽວກັນ, ຄັດເລືອກຕາມຄຸນນະພາບ.
