Opus Arch Sella, Sella Sine Dorso a designatore Edvard Glazebrook est victor maxime honoratus praemii praestigiosissimi 2021 Praemium A' Design Award Aeneum in Categoria Certaminis Designatio Supellectilis.
AesSupellex· 2021
Arch Sella, Sella Sine Dorso
Victor praemii Praemium A' Design Award Aeneum in Categoria Supellex
Victor Praemii Verificatus
Verifica Statum Praemii pro #106853Designum
De Arch Sella, Sella Sine Dorso
Arcus est sella et sedile sine dorso ex ligno pini laminato caelato et nigro tincto factum. Formatio in formis simplicibus et repetitis fundatur, quae supellectili expressionem homogeneam et logicam praebent. Quinque arcus identici crura et dorsum sellae efficiunt, dum sedile sine dorso ex tribus semiarcubus in medio conjunctis constat. Omnes partes ex tabula lignea laminata machina CNC praecisae sunt, deinde glutino iunctae et paxillis ligneis coniunctae. Curvae supellectilem in locis infirmissimis firmant.
Agnitio
De Praemium A' Design Award Aeneum
Arch Sella, Sella Sine Dorso victor est Praemii A' Design Award Aeneum, honoris multum aestimati formis egregiis, creandi ingenio, sollertia et acumine insignibus dati. Victores Aenei opera perita et mire creandi sunt, quae experientiam, imaginationem et solertiam auctorum suorum confirmant. Exspectatur Arch Sella, Sella Sine Dorso rem multum aestimatam, admiratam et carissimam, notabiliter professionalem et novam fore. Haec forma Aeneo victa optimas consuetudines artis, scientiae, formandi rationis et technologiae amplectitur et in cura minutiarum excellit. Arch Sella, Sella Sine Dorso necessitates egregie explet, cupiditates tangit, sensus capit et curiositatem allicit.
Post Designum
Fasciculus Nuntii
Merita, sodales gregis et singula technica a designatore praebita.
- Proprietates Singulares
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimensiones et Involucrum
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Notulae
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Technologia Productionis
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Provocatio Designandi
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Investigatio
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiratio
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Duratio Operis
- The project started in march 2020 - and finished in late May 2020.
- Cursus Operationis
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patentes
- Copyrights belong to Edvard Glazebrook, 2020
- Membra Turmae
- Edvard Glazebrook
Patrocinatum
Explora Ultra Designers.org
Inveni producta, servitia et occasiones a sociis nostris publicitariis.
Plura Exploranda
Designa Cognata
Explora plura designa praemio ornata ex eadem categoria, merito selecta.
