Chris Dopp & Travis Baldwin의 Vista EY2T 전동식 생체인식 카메라

디자이너 Chris Dopp & Travis Baldwin의 작품 Vista EY2T 전동식 생체인식 카메라은(는) 매우 권위 있는 2015 A' Design Award 은상의 보안, 안전 및 감시 제품 디자인 부문에서 탁월한 수상작입니다.

은보안 제품· 2015

Vista EY2T 전동식 생체인식 카메라

디자이너: Chris Dopp & Travis Baldwin

클라이언트: Vista Imaging and Crea Inc Design LTD

보안 제품 부문 A' Design Award 은상 수상작

25,961

인증된 수상작

#40052 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Vista EY2T 전동식 생체인식 카메라 소개

Vista EY2T는 홍채 및 얼굴 인식을 위한 전동식 생체인식 카메라입니다. 이 장치는 시야 내에서 얼굴을 탐지한 후, 모터가 카메라를 회전시켜 눈을 정확히 조준합니다. 폭넓게 배치된 적외선 LED와 자동 초점 시스템 덕분에 약 90cm에서 180cm 거리에서도 인식이 가능하여 수동 조준이 필요하지 않습니다. 전면의 아홉 개 센서는 하나의 검은색 면 뒤로 통합되어 있으며, 양 끝이 둥근 원통형 캡슐 형태는 위압감 없이 편안한 인상을 줍니다. 이 카메라는 독립형으로 사용하거나 벽면 거치대와 함께 설치할 수 있습니다.

수상 인정

A' Design Award 은상 소개

Vista EY2T 전동식 생체인식 카메라, 이 작품은 A' Design Award 은상 수상작으로, 최상급이며 아름답고 인상적인 디자인에 수여되는 비범하게 권위 있는 인정입니다. 은상 수상작은 대단히 뛰어나고 매우 창의적인 작품으로, 디자이너의 탁월한 전문 지식, 재능, 통찰력을 보여 줍니다. Vista EY2T 전동식 생체인식 카메라, 이 작품은 훌륭한 대표작으로서 매우 전문적이고 깊이 있게 혁신적일 것으로 기대됩니다. 이 은상 수상 디자인은 예술, 과학, 디자인, 기술의 경계를 넓히는 데 이바지하는 주목할 만하고 찬사를 받는 발명품입니다. Vista EY2T 전동식 생체인식 카메라, 이 작품은 모두가 부러워하는 창작물로서 욕망을 일깨우고 긍정적인 감정을 불러오며 경탄과 경이로움을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
치수 및 패키징: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
태그: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
생산 기술: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
디자인 과제: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
연구: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
영감: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
프로젝트 기간: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
운영 흐름: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
팀원: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
이미지 출처: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015