디자이너 Victor Wu의 작품 Rebloom 모듈화된 실외 프레임은은(는) 매우 권위 있는 2023 A' Design Award 철상의 지속 가능한 제품, 프로젝트 및 그린 디자인 부문에서 탁월한 수상작입니다.

철지속 가능한 제품· 2023

Rebloom 모듈화된 실외 프레임은

디자이너: Victor Wu

클라이언트: Leafer Circular Design

지속 가능한 제품 부문 A' Design Award 철상 수상작

19,850

인증된 수상작

#143099 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Rebloom 모듈화된 실외 프레임은 소개

대만의 배전 부품은 비싸고 환경적 요인으로 인해 자주 교체해야 합니다. reBloom은 폐기된 크로스암을 최소한의 처리로 내구성이 뛰어난 야외 프레임으로 용도 변경하여 솔루션을 제공합니다. 모듈식 설계로 인해 조정, 확장 및 부품 교체가 쉬워 재활용 전에 부품 수명이 최대화됩니다. reBloom을 사용하면 폐기물을 줄이고 비용을 절감하는 동시에 신뢰할 수 있고 날씨에 강한 인프라를 보장할 수 있습니다.

수상 인정

A' Design Award 철상 소개

Rebloom 모듈화된 실외 프레임은, 이 작품은 A' Design Award 철상 수상작으로, 잘 디자인된 창작물에 기대되는 전문적·산업적 요건을 충족하는 좋은 디자인에 수여되는 권위 있는 인정입니다. 철상 수상작은 창작자의 뛰어난 기술, 높은 전문성, 전문가다운 이해, 창의적 역량을 보여 줍니다. Rebloom 모듈화된 실외 프레임은, 이 작품은 높이 평가받고 감탄과 사랑을 받는 창작물로서 실용적이고 혁신적일 것으로 기대됩니다. 이 철상 수상 디자인은 업계 모범 사례를 통합하며 노하우와 재능으로 연결된 유능한 기술적 특성을 갖추고 있습니다. Rebloom 모듈화된 실외 프레임은, 이 작품은 철저함으로 존중받으며 삶의 질을 개선하여 세상을 더 나은 곳으로 만들도록 디자인되었습니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: Due to humidity, typhoons, and earthquakes, Taiwan's power distribution relies on costly crossarm components regularly exchanged every decade.
reBloom extends the lifecycle of these decommissioned components by transforming them into sturdy and weather resistant outdoor frames, with little processing or additional parts. reBloom's modular design also means it is highly adaptable, extendable, and allows for easy part replacement - all of which further maximize component life before recycling.
치수 및 패키징: The inherent dimensions and features of the decommissioned utility crossarm components were integrated to reduce additional processing and material consumption.
Specs of the original crossarm components used in a reBloom set (mm): (a) 2.5 crossarms, hollow square beam 1800 x 750 x 750 (THK 2.5), (b) 8 crossarm braces, 800 x 400 (THK 6), and (c) 12 sets of square nuts and square head bolts, 25 x 25 x 100.
Dimensions of a reBloom section (mm): 825.5 (each section adds 737.5) x 1223.5 x 800 x 75mm.
태그: circular economy, modular, decommissioned materials, joinery, fence, outdoor, frame, galvanized steel, product life, material lifespan
생산 기술: The crossarm components that reBloom utilizes are made from hollow, hot-dip galvanized steel beams, and have standardized dimensions and holes (punched via mass-production CNC machines). Little further processing is required to produce a reBloom set beyond some welding, bolt shortening, and assembly - especially when the reBloom design is incorporated during initial crossarm production (adding a few new holes). The standardized and modular design means it is easy to combine the decommissioned components into new forms, such as a fence, furniture structure, etc.
디자인 과제: The hardest design challenge overcome in reBloom was the integration of the square head bolts.
Small and uncommon, it would be wasteful to create a single-use tool for their tightening. The final design includes a simple 'n'-shaped piece that doubles to help users with the last few twists as well as to lock the structure. Additionally challenging was calculating the position of the crossarms' original holes such that the crossarm braces can be evenly spaced and require the least processing.
연구: We sought to design a second life for utility crossarm components, which are regularly decommissioned decades before degradation due to regulations.
Consulted factories told us that the material doesn't easily bend and that welding nullifies its weather resistance. We observed that mass production also required modularization and using existing specs. After brainstorming, we tested different joinery methods. The final design was praised by the utility company and showcased in several exhibits.
영감: While on a visit to a utility company's waste stockpiles, we were struck by the prevalence of square head bolts, which are rarely seen in daily life. We wondered if making the format more accessible would give these discarded parts a chance to be reborn. This led us to create reBloom, a modular and adaptable design that extends the lifespan of various decommissioned components. Within reBloom, an ‘n’-shaped piece was designed to be both a wrench for the square head bolts and play an integral part of the final structure.
프로젝트 기간: The project started in September 2020 and finished in January 2021 in Tainan, Taiwan. Afterwards, a physical exhibition and presentation was held in Taipei in May 2021 and Kaohsiung in March 2022.
운영 흐름: Due to the rarity of square head bolts nowadays, most people would lack the tools needed to install reBloom. This issue was solved with the inclusion of an 'n'-shaped piece that functions as an easily-held wrench during installation, and lastly integrates into the final structure as a lock between each reBloom frame segment. This design makes it easy for any person to build reBloom.
특허: Copyrights belong to Victor Wu, 2020.
이미지 출처: Image #1: Craig Bossley, Scenario, 2021.
Image #2: Victor Wu, Prototyping, 2020.
Image #3: Craig Bossley, Joint Closeup, 2021.
Image #4: Willy Chao, Setup, 2021.
Image #5: Victor Wu, Scenario Closeup, 2021.