디자이너 Xiangzhi Zhao의 작품 Morning Dew 재생 반지은(는) 매우 권위 있는 2020 A' Design Award 동상의 주얼리 디자인 부문에서 탁월한 수상작입니다.

동주얼리· 2020

Morning Dew 재생 반지

디자이너: Xiangzhi Zhao

클라이언트: Dist industrial design studio

주얼리 부문 A' Design Award 동상 수상작

17,364

인증된 수상작

#103005 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Morning Dew 재생 반지 소개

모닝 듀는 귀금속을 회수하는 방법으로 소재에 집중하여 재생 된 금과은을 소재로하여 만들어졌습니다. 제조 방법은 다공성 물질이 포함 된 아민을 사용하여 선택한 금속 이온을 흡착하고 처리 공정에서 처리 액을 재사용하는 간단한 방법입니다. 마지막으로 귀금속을 회수하려면보다 환경 친화적 인 방법을 선택하는 것이 중요합니다.

수상 인정

A' Design Award 동상 소개

Morning Dew 재생 반지, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Morning Dew 재생 반지, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Morning Dew 재생 반지, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: The ring was designed with a focus on materials. In designing the "morning dew", an original and greener method of recovering precious metals is used to prepare regenerated gold and silver as materials. The preparation method is simply to use an amine-containing porous material to adsorb selected metal ions, and to achieve reuse of the treatment liquid in the treatment process, so as to recover precious metals by more environmentally friendly methods.
치수 및 패키징: Width 20 mm x Depth 20 mm x Height 4 mm
태그: Ring, Grace, environmental protection, New material, Artistic
생산 기술: The original green precious metal recovery method is to copolymerize 4,4 '- (hexachloroisopropyl) bisphenol with melamine in alkaline solution, the obtained amine-containing porous material can absorb selected metal ions in the solution, and the treatment liquid can be reused to reduce the production of waste water. The material used in “morning dew " is made entirely from this extraction method.
디자인 과제: The molar ratio of cyanamide to hexachlorophenol A is from 3:1.9 to 3: 2.2. Whenthe molar ratio is less than 3:1.9 or more than 3:2.2, the yield is significantly reduced. This characteristic is obtained through numerous experiments. In order to design a metal method with more high-yield regeneration, much efforts and experiments must be made.
연구: Through many experiments and comparative analysis, it is concluded that the dehydration reaction temperature of the material used for regenerating metal is 136-140 celsius degree, the reaction time is 3-5 hours, and when the time is less than 3 hours, the polycondensation is incomplete and the yield is low.
영감: According to UNEP, an average of 1 ton of ordinary electronic waste contains 490 kg of metal. If not recycled, it will cause a huge waste of resources. The most commonly used pyrometallurgical technology for disposal of electronic waste will produce toxic gases, such as fluorocarbons, bromine flame retardants and organic compounds, which tend to generate dioxins under oxidation conditions. In recent years, the solid-phase extraction method has less solvent consumption, simple reaction and fast speed. However, waste of liquid of this technology has become a problem in treatment process.
프로젝트 기간: The project began in Beijing in 2018, applied for a technology patent in early 2019, and was completed in 2019.
운영 흐름: The design of “morning dew " ring focuses on the material, which is made of regenerated gold and silver by a greener way of recovering precious metals. Based on this material, a ring with the shape of dew, wrapped by vines, is designed. A scrap circuit board is much more valuable than a gold mine of the same quality in terms of gold proportion. Therefore, reuse of electronic waste is not receiving enough attention but worth of attention and implementation. It is hoped that the design of "morning dew" will provide guidance of reducing resource waste and promoting resource recovery.