Sprout Sepeda dening JunXiang Cheng and Yi Yang

Karya Sprout Sepeda dening JunXiang Cheng and Yi Yang minangka pemenang sing diajeni banget saka A' Design Award Wesi 2022 sing bergengsi ing Kategori Kompetisi Desain Wujud lan Produk Cetak 3D.

WesiCetak 3D· 2022

Sprout Sepeda

dening JunXiang Cheng and Yi Yang

Klien: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Pemenang A' Design Award Wesi ing Kategori Cetak 3D

32,018

Pemenang Penghargaan Terverifikasi

Verifikasi Status Penghargaan kanggo #137286

Deleng ing A' Design Award Siaran Pers Lencana Penghargaan

Warna

Desaine

Babagan Sprout Sepeda

Sprout minangka sepeda sing diprodhuksi kanthi pencithakan telung dimensi. Rangkane dibentuk liwat optimasi topologi, kang mapanake materi mung ing panggonan sing dibutuhake lan nyuda total jumlah materi sing dianggo. Analisis tegangan statis kanthi metode elemen winates mbuktekake stabilitase struktur rangka. Model pungkasan dicithak nganggo nilon kapadhetan dhuwur. Sepeda iki ukurane 1630 mm dawane, 600 mm ambane, lan 832 mm dhuwure. Pencithakan ngilangi kabutuhan cetakan sing larang, saengga saben rangka bisa nuruti desain individu.

Pangakuan

Babagan A' Design Award Wesi

Sprout Sepeda menang A' Design Award Wesi, pangenalan sing prestisius sing diparingake marang desain sing apik sing nyukupi kabutuhan profesional lan industri sing dikarepake saka ciptaan sing dirancang kanthi apik. Pemenang Wesi nuduhake katrampilan sing gedhe, spesialisasi sing dhuwur, pangerten ahli lan kapasitas kreatif para penciptane. Sprout Sepeda dikarepake dadi ciptaan sing dihargai banget, dikagumi lan ditresnani sing praktis lan inovatif. Desain sing menang A' Design Award Wesi iki nggabungake praktik industri sing paling apik lan nduweni ciri teknis sing kompeten sing disambung karo kawruh lan bakat. Sprout Sepeda diajeni amarga ketelitiane lan dirancang kanggo nyedhiyakake paningkatan kualitas urip sing mbiyantu ndadekake donya panggonan sing luwih apik.

Ing Mburi Desain

Kit Pers

Kredit, anggota tim lan detail teknis sing diwenehake dening desainer.

Sifat Unik: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Ukuran & Kemasan: Length 1630mm, width600mm, height 832mm
Tag: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Teknologi Produksi: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Tantangan Desain: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Riset: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspirasi: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Durasi Proyek: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Alur Operasi: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Anggota Tim: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao