Interview with Olga Yatskaer

From the original background, I am a professional historian and psychologist. But since I was a little girl, I really liked drawing. I’ve been drawing at every occasion, especially new patterns, crossings and combinations of colors. One day there was a ball in my university, and I had to find some jewelry to fit the robe. It took a while but nothing was really fitting. And then I took a piece of paper and made a sketch just for fun, trying to imagine how this piece of jewelry could look like. The sketch looked quite interesting to me. Shortly after I started my attempts in the fantasy jewelry, first to create pieces that I would like myself to wear. Eventually I faced the limits of fantasy jewelry, and tried to materialize my sketches into professional jewelry pieces. It took some time to learn the necessary techniques and to get experience. I’m really thankful to my professors, my family and friends who always supported me, and everyone who helped me throughout these years.

In most cases, I just get an idea and draw a sketch using a pencil and a sheet of paper. I like using pencil, because this is how I can easily translate my thoughts and emotions onto paper, and I can always erase something and change it. While every design is a fruit of imagination, you will find some of my signature elements in numerous designs – such as fine engravings, or filigree elements placed behind the gemstones.Depending on the design, I would either create the piece manually, or proceed with the 3D modeling. For a jewelry designer, technology is very useful to reflect all finest details, while ensuring that the design would be practical in production and finishing. To create complex pieces, I do like using 3D modelling. If it was not for 3D, quite a few of my ideas would likely still remain on paper - because it is either technically impossible or would take tremendous effort to create them manually with the desired precision and proportions. Renders are good to get the first idea about the look. Subsequently, through 3D printing I can make instant prototypes to ensure that all parts, sizes and details will perfectly fit, which is particularly important for jewelry.

For me, the design is a song of my soul, a flight of my fantasy without any limits, the world behind the mirror. This is an opportunity to convert my dreams and inside feelings into something tangible, a self-expression. It is related to harmonious comprehension of something around me. It is one more way of communication to the people, to the outside world. It is like playing with a magic stick, when you just imagine something and then it appears out of nowhere.

There are creative skills that make the designer, such as the feeling of style, a rich fantasy, a taste, and a positive mindset. The practical skills are important as well, such as understanding the client, patience, being accurate, attentive, and doing things on time.Time management is of essence to designers. However, this is something rather natural and easy for me. Thanks to my parents, from the very childhood I got used to plan my work and to set my priorities upfront. I am trying to stick to the plan in order to be on time, nevertheless I leave enough flexibility to cater for unforeseen changes.My family has been my biggest supporter. I am thankful to them for all love and patience. My family helped me believe in myself and take a chance to completely change my profession and become a jewelry designer.

The most immediate plans is to complete a new collection of jewelry sets. Each set starts from a particular piece representing my existing designs, there will be more than 15 sets in total to begin with.I aim for my jewelry to reach thousands of people worldwide, and for them to enjoy my designs. This is what I have created my company Queensberg for. My dream is to create jewelry pieces that people will appreciate even in 100 years from now.

Don’t be afraid to express yourself. Don’t be afraid to improve yourself and learn something new, even if it is complicated and takes time. Don’t stop and keep moving forward.

Both good and great designers should have creative skills, such as the feeling of style, a rich fantasy, a taste, and a positive mindset. But great designers should have practical skills as well, such as understanding the client, patience, being accurate, attentive, doing things on time, knowing how to present the designs efficiently and how to communicate.Remember your early days and those who were at your side and help you reach the success. And one more thing: “you are there for the clients”, not “clients are there for you”.

When at home, I would take a walk in the morning and get to my workshop. Have some client meetings. Relax, get inspired and create the sketches. Have a dinner with my family. But when I’m travelling, every day is quite different and not like another one.If I have created a new interesting design today, this was a great day. I motivate myself through hoping that someone will enjoy this particular design and appreciate wearing this particular piece.

On a global scale, I see several trends. One is that anyone can get anything anywhere anytime and almost immediately, with emergence of mobile channels. It is now so much faster and cheaper for creative people to get their ideas spread around the globe. Therefore, more new talents can get known at faster pace than it was even in the last decade, let alone the last century. It’s a kind of YouTube’isation of design if you will. But with the multitude of talents comes the challenge of the choice. And only the very best ones will really make it to the worldwide fame…like it has always been. Another trend, especially with millennials, is the aim for designs that are practical and cool, but not necessarily expensive. This trend is particularly visible in the jewelry design.More generally, I believe the design trends follow a spiral-shaped evolution. Great designs sets the new trends, which on its turn set new designs (whether great or otherwise), and again new great designs lead to new trends.As far as my own designs are concerned, I use several styles simultaneously, because I would not like to stick to just one. I like inventing new styles, changing them and combining them. My approach to the design is to create the jewelry pieces that people could wear every day, as well as for special occasions. The inspiration for designs does not necessarily come from one or another trend, but rather by anything around me - whether it’s the nature, the weather, the people, the books, the magazines, beautiful music, a movie, or an architectural pattern… I just feel like creating something. And then I listen to my inside feelings, catch this creative wave and try not to lose it out of sight.

When I’m looking at a jewelry piece made by my colleagues, I first evaluate it on my subjective feeling. That is, if I had this piece, would I like to wear it myself? And then I look at other aspects. Is it wearable at all? How original is the piece? How well are the colors, stones and other elements selected and combined together? And if this is not yet a readily made piece but still a project, I’m also looking how feasible it is to produce the piece.

In my case, the first sketch would take between a few hours and a few days. The same concerns the 3D design. But I only consider the initial design as completed when the first jewelry piece has been produced. And sometimes this might take even a few weeks. Indeed, I like getting back to my earlier designs from time to time, and enhancing them or creating a collection of pieces around a particular design. As an example, some collections started with a pendant – like Eternal Union – and evolved into complete sets. Other collections could start with earrings or even a ring. And of course the customer reaction is of essence, especially as far as design success is concerned. Sometimes the clients can give you great hints on what could be improved or enhanced.

I love “Eternal Union”. This piece will always remain special for me for many reasons. First, it is a simple shape, yet something that never existed before. Secondly, this is my first-ever internationally awarded design, which just created so much more visibility and recognition to my work literally overnight, thanks to “A’ Design Award”. Before designing Eternal Union, most of my models would combine metal with stones or enamel. This was one of my first attempts to create a metal-only model, as well as a model representing the optical illusion. The initial creation of this particular piece was mostly driven by fantasy and emotions. The purpose was to design a simple yet appealing and wearable jewelry piece, combining the classic and contemporary influences. The risk with a simple design is that someone else may have already created it sometime in the past. Therefore, once the shape was conceived, I made a research to make sure it does not resemble any other piece. I searched through my library of books and publications on jewelry design. I also googl'ed the images of Celtic, Greek and Etruscan pieces. So far I concluded that this design is indeed something new and unique.You may find more details about this design at the “A’ Design Award” website, there is also a separate interview dedicated to this piece.

My all-time favorite designers are Georg Jensen, René Lalique and Ilias Lalaounis. I learned to appreciate the harmonic simplicity from Georg Jensen, to admire beautiful shapes from René Lalique, and to design in many different styles simultaneously from Ilias Lalaounis.

I live in the center of Europe, and from my background I’m a professional historian. Europe is a unique part of the world, where thousands years of history and events have crossed together within a rather small area. It is quite surrealistic to realize that an ancient Roman road went just a few hundred meters away from my place. The Merovingians as well as the ancestors of Charlemagne are all coming from our area. For designers, Belgium is a great place to be. You will find here many different sources of inspiration and an overwhelming feeling of freedom.

At this stage, my company Queensberg takes care of design, development and production. Queensberg creates jewelry pieces based on my designs and distributes them, both directly and through partners. As far as the work culture and business philosophy is concerned, I believe that a good designer should be professional in whatever he does. While having a good taste and style, he should feel the client needs and ensure the right quality. He should do things on time, the client does not have to run after the designer. Some of these principles can be applied when selecting your team members and choosing your partners.

In my view, a truly sincere philanthropic contribution is the one you are not talking about. The philanthropy is about “paying forward” to the others, without necessarily expecting an immediate return.

A’ Design Award was my very first award, and I felt surrealistic about this sudden overnight recognition that I could only dream of. I am really thankful to A’ Design Award and the entire team behind it, as it is a great support to promote my designs.

Since I was a little girl, I really liked drawing. I’ve been drawing at every occasion, especially new patterns, crossings and combinations of colors. I studied history and am a professional historian. One day there was a ball in my university, and I had to find some jewelry to fit the robe. It took a while but nothing was really fitting. And then I took a piece of paper and made a sketch just for fun, trying to imagine how this piece of jewelry could look like. The sketch looked quite interesting to me. Shortly after I started my attempts in the fantasy jewelry, first to create pieces that I would like myself to wear. Eventually I faced the limits of fantasy jewelry, and tried to materialize my sketches into professional jewelry pieces. It took some time to learn the necessary techniques and to get enough experience to become a professional jewelry designer.

I chose to become a designer myself and am happy about it. When someone is forced to be a designer against her will, this must be really tough and even impossible to become one.

My passion and profession is the jewelry design. Something I aimed for during my whole life.

Don’t be afraid to express yourself. Don’t be afraid to improve yourself and learn something new, even if it is complicated and takes time. Don’t stop and keep moving forward. And when you start growing and get recognition, remember your early days and those who were at your side and help you reach the success. And one more thing: “you are there for the clients”, not “clients are there for you”.

Both good and great designers should have creative skills, such as the feeling of style, a rich fantasy, a taste, and a positive mindset. But great designers should have practical skills as well, such as understanding the client, patience, being accurate, attentive, doing things on time, knowing how to present the designs efficiently and how to communicate.

When I’m looking at a jewelry piece made by my colleagues, I first evaluate it on my subjective feeling. That is, if I had this piece, would I like to wear it myself? And then I look at other aspects. Is it wearable at all? How original is the piece? How well are the colors, stones and other elements selected and combined together? And if this is not yet a readily made piece but still a project, I’m also looking how feasible it is to produce the piece.

The people always aim at something new and interesting. Without investments, there won’t be enough motivation to advance and to grow creatively. Some designs are even impossible to materialize without an investment, particularly the jewelry pieces.

I am happy to create my designs for people who appreciate good jewelry. As a designer, I am responsible to manage my time and to make sure that I have enough time to do my designs.

I dream for my jewelry to reach thousands of people worldwide, and for them to enjoy my designs. This is what I have created my company Queensberg for.

Keep all what is necessary and drop everything that is excessive. I know it sounds easy but it is not, especially for creative people.

I learned to appreciate the harmonic simplicity from Georg Jensen, to admire beautiful shapes from René Lalique, and to design in many different styles simultaneously from Ilias Lalaounis.

Out of jewelry designs, I would name Heritage Jewelry pieces by Georg Jensen. They are really timeless. I love to wear them myself. The colors and shapes are soft and harmonious. The designs look appealing and different, yet there is nothing excessive. All these aspects make them great.

Out of all my designs, “Eternal Union” will always remain special for me for many reasons. First, it is a simple shape, yet something that never existed before. It has two different optical illusions in one design. Secondly, this is my first-ever internationally awarded design, which just created so much more visibility and recognition to my work literally overnight, thanks to “A’ Design Award”.

Unleash your creativity, keep on learning and don’t be afraid of new things. This is what helped me.

I would still be a historian, which is my first education, or a psychologist, which is my second education. But I would continue doing my sketches and designs, dreaming to become a jewelry designer one day.

For me, the design is a song of my soul, a flight of my fantasy without any limits, the world behind the mirror. This is an opportunity to convert my dreams and inside feelings into something tangible, a self-expression. It is related to harmonious comprehension of something around me. It is one more way of communication to the people, to the outside world. It is like playing with a magic stick, when you just imagine something and then it appears out of nowhere.

My biggest supporter was my family. I am thankful to them for all love and patience. My family helped me believe in myself and take a chance to completely change my profession and become a jewelry designer. I’m really thankful to my professors who guided me through all different jewelry techniques and helped me acquire the necessary skills, and to my friends who always supported me. And certainly to “A’ Design Award” contest, which is a great support to promote my designs, and the entire team behind it.

Patience with a grain of perfectionism, and a lot of optimism

For a historian, the world of jewelry design looked quite mysterious and closed, maybe just like the world of academic history does for jewelry designers. But when you try, it opens up and you find many good people who are willing to help you grow as a designer.

As far as jewelry design is concerned, the presentation should be interesting for any viewer, no matter if she is a design professional or someone who just likes jewelry. It should showcase the actual piece as closely as possible to reality and highlight its strong sides. A catchy name for the design is important for the presentation as well.

One of the next projects is a new collection of metal-only designs. Most of these designs will have several pieces in every set, such as pendants, earrings, rings and bracelets. Meanwhile, I will of course continue creating new designs with precious stones and enamel as well. I have plenty of new sketches in my notebook, and it keeps on growing as the new ideas keep on coming.

To create jewelry pieces that people will appreciate even in 100 years from now.

From a jewelry designer, I think they expect to find some appealing jewelry pieces, whether for themselves, their loved ones or their friends.

“Beauty will save the world” (Dostoevsky)

From the most immediate ones, the Eternal Union pendant is going to get siblings. There are earrings coming up, and the work on a ring design is in progress as well.

Eternal Union, because this was my first design to get an international award.

I believe that people will get more and more tired of similarity and aim at highlighting their individuality further. This would certainly reflect into the design industry.

First of all, I believe there is no such thing as a single worldwide “design field”. The evolution is really different from one region to another, and from one design category to another. As an example, the jewelry design trends in Belgium are different from those in Dubai, and both differ from those in South Africa or in Canada.
On a global scale, I see several trends. One is that anyone can get anything anywhere anytime and almost immediately, with emergence of mobile channels. It is now so much faster and cheaper for creative people to get their ideas spread around the globe. Therefore, more new talents can get known at faster pace than it was even in the last decade, let alone the last century. It’s a kind of YouTube’isation of design if you will. But with the multitude of talents comes the challenge of the choice. And only the very best ones will really make it to the worldwide fame…like it has always been.
Another trend, especially with millennials, is the aim for designs that are practical and cool, but not necessarily expensive. This trend is particularly visible in the jewelry design.

It all depends on the design complexity. In my case, the first sketch would take between a few hours and a few days. The same concerns the 3D design. But I only consider the design as completed when the first jewelry piece has been produced. And sometimes this might take even a few weeks.

In most cases, I just get an idea and draw a sketch using a pencil and a sheet of paper. I like using pencil, because this is how I can easily translate my thoughts and emotions onto paper, and I can always erase something and change it. Then, depending on the design, I would either create the piece manually, or proceed with the 3D modeling.

Improve myself

I think this is a spiral-shaped evolution, and that not every design can set the trend. Great designs sets the new trends, which on its turn set new designs (whether great or otherwise), and again new great designs lead to new trends.

For a jewelry designer, technology is very useful to reflect all finest details, while ensuring that the design would be practical in production and finishing. To create complex pieces, I do like using 3D modelling. If it was not for 3D, quite a few of my ideas would likely still remain on paper - because it is either technically impossible or would take tremendous effort to create them manually with the desired precision and proportions.

As a designer I have my paper, pencil and a lot of books as well. For 3D modeling, Gemvision Matrix is my favorite. As a jeweler I have to use dozens of tools and machines, in order to materialize any design idea that I might have.

In jewelry design, the role of color and materials is to create harmony and to highlight the individuality of the person wearing it, whether through different metals, precious stones or enamel. It is very specific to the jewelry designs that the material adds value on its own, and can even be a centerpiece of the design.

Where and how can we get this piece?

First, I ask myself where and how it could be used, and how different it is.

So far I created the designs myself. An ideal design partner is someone who could be at the same wavelength and is a real team player. I believe co-design must be possible in jewelry, however it seems to be rare.

My designs reflect the way I see the outside world, therefore I would not name particular people who would have direct influence on my designs.

Indirectly, there could be influence from my historian background and numerous materials that I studied and analyzed in that job.

I continuously tried many different ideas while always learning something new.

I would want to meet these guys who invented Cycladic figurines, as I’m curious what did they really mean? And maybe the Atlantes as well, just to find out if they really existed :)

This is my very first award, and I feel surrealistic about this recognition that I could only dream of.

My favorite color is dark blue. My home town is my favorite place to live, and London is my favorite place to visit. I like ice cream and Belgian chocolate. I love springtime. There are many great brands that are my favorites, therefore I won’t mention any particular one amongst them, out of respect to the other ones.

This is something from my earliest design experience. When I was 3 years old, my father chased a gravure. And as the parents were in the kitchen, I got hold of his instruments, took a chisel and a hammer. Improving the design of a vintage chair was real fun… luckily enough my father noticed it just as I wanted to proceed with the second chair :)

If I have created a new interesting design today, this was a great day. I motivate myself through hoping that someone will enjoy this particular design and appreciate wearing this particular piece.

Maybe not. But I always amazed by my grandmothers’ jewelry boxes, these were like treasure chests. I loved watching and touching the jewelry, and I’d put it on my puppets too.

Earthlings will still design something, maybe for our neighbor galaxies as well :)

Our company has been established in 2017, it is called Queensberg. It is based in Wavre, Belgium. Queensberg takes care of promotion of my jewelry designs and production of the actual pieces. We believe there is a lot of unexplored potential for new jewelry design brands both in Benelux and at our neighbors. For production, we prefer to rely on our own resources or on proven partners, to do everything in time and ensure highest possible quality. We are building up the distribution network and looking for international partnerships.

For me, the design is a song of my soul, a flight of my fantasy without any limits, the world behind the mirror. This is an opportunity to convert my dreams and inside feelings into something tangible, a self-expression. It is related to harmonious comprehension of something around me. It is one more way of communication to the people, to the outside world. It is like playing with a magic stick, when you just imagine something and then it appears out of nowhere.

I like designing all kinds of jewelry. I like designing pieces that are beautiful, wearable, practical, and are not copycats of someone else’s.

My all-time favorite designers are Georg Jensen, René Lalique and Ilias Lalaounis.
From my own designs, I love “Eternal Union”. This piece will always remain special for me for many reasons. First, it is a simple shape, yet something that never existed before. Secondly, this is my first-ever internationally awarded design, which just created so much more visibility and recognition to my work literally overnight, thanks to “A’ Design Award”. You may find more details about this design at the “A’ Design Award” website, there is also a separate interview dedicated to this piece.

So far, I only designed for my own company. The first jewelry design I made for a customer was a charm representing a mouse, made of rhodium-plated silver.

I like to work with all precious metals - whether it is yellow gold, white gold, silver or platinum. I also like rhodium-plating the silver and white gold pieces, as rhodium has such a nice color, it makes the pieces look really alive and keeps their beauty intact.
To capture the design ideas, I prefer to use a piece of paper and pencil, just like in my student time. For some of my pieces, the traditional jewelry making techniques are a good fit. However, to create complex pieces, I do like using 3D modelling. If it was not for 3D, quite a few of my ideas would likely still remain on paper - because it is either technically impossible or would take tremendous effort to create them manually with the desired precision and proportions.

I feel the most creative when I travel to new places I have never been before. And when I’m coming back home after a travel, even more ideas are emerging. I went to discover Canada and was impressed by beauty of its nature, and then my first collection was born. Another collection was born in a hot Spanish summer, another one during a short trip to New York, and so on.

I ensure that all design elements would complement each other, for every little detail to be on the right place, for all these details to form a piece in harmony, and that there is nothing unnecessary or excessive in the design.

The world around me just ceases to exist. I’m getting into a very different space, just like Alice in Wonderland. In this wonderland, I feel unlimited freedom and happiness. It takes me away, just like flying.

Happiness – because something new and beautiful was just born, that did not exist before. Impatience – because once the design is created, I want the actual jewelry piece to be made as quickly as possible. Satisfaction and joy – when the piece is made and it looks just like I have imagined it.

I believe that the more people recognize and like the design, the more successful it is.
More specifically, a successful jewelry design is a piece that people like to wear, that they picture themselves with, that they present to their loved ones, and that creates good memories.

When I’m looking at a jewelry piece made by my colleagues, I first judge it on my subjective feeling. That is, if I had this piece, would I like to wear it myself? And then I look at other aspects. Is it wearable at all? Is it an original or did I see it before? Furthermore, if this is not yet a readily made piece but still a project, I’m also looking whether it is feasible to make the piece at all. These are the first aspects for me to consider.

I think the designer must be fair towards his clients, partners and colleagues. We are responsible to make the society better through the beauty of our designs and to connect people. We should stay away from provoking negative emotions and conflicts.
Concerning the environment, we as jewelers are working with metals and other substances. This makes us particularly responsible for strictly respecting all rules to protect the health of our customers, coworkers and the environment. We have very well defined rules for that here in EU. Furthermore, it is important to make sure that all materials are coming from reliable and ethical sources.

First of all, I believe there is no such thing as a single worldwide “design field”. The evolution is really different from one region to another, and from one design category to another. As an example, the jewelry design trends in Belgium are different from those in Dubai, and both differ from those in South Africa or in Canada.
On a global scale, I see several trends. One is that anyone can get anything anywhere anytime and almost immediately, with emergence of mobile channels. It is now so much faster and cheaper for creative people to get their ideas spread around the globe. Therefore, more new talents can get known at faster pace than it was even in the last decade, let alone the last century. It’s a kind of YouTube’isation of design if you will. But with the multitude of talents comes the challenge of the choice. And only the very best ones will really make it to the worldwide fame…like it has always been.
Another trend, especially with millennials, is the aim for designs that are practical and cool, but not necessarily expensive. This trend is particularly visible in the jewelry design.

At the time of this interview (April 2017), the last exhibition was in Chateau d’Hermitage in Wavre, Belgium in 2016. The next upcoming events are an exposition in Grange du Douaire in Ottignies, Belgium between 5th May and 21st May, and very importantly the Exhibition @ Mood in Como, Italy between 6th June and 26th June, organized by A’ Design Award.

I can be inspired by anything around me - whether it’s the nature, the weather, the people, the books, the magazines, beautiful music, a movie, an architectural pattern… I just feel like creating something. And then I listen to my inside feelings, catch this creative wave and try not to lose it out of sight. And sometimes it happens that I should create something particular. Then I tune myself, imagine and try different options, choose the ones I like best, and let the customer make the final choice.

I create designs in several styles simultaneously, because I would not like to stick to just one. I like inventing new styles, changing them and combining them. My approach to the design is to create the jewelry pieces that people could wear every day, as well as for special occasions. For example, my designs with precious stones or enamel could differ through the shape, choice of colors, or pattern. I also like creating designs with no stones and no enamel, just metal. These kinds of designs are particularly demanding, as they have to differ through very special shapes and patterns. Eternal Union is one of such designs.

I live in the center of Europe, and from my background I’m a professional historian. Europe is a unique part of the world, where thousands years of history and events have crossed together within a rather small area. It is quite surrealistic to realize that an ancient Roman road went just a few hundred meters away from my place. The Merovingians as well as the ancestors of Charlemagne are all coming from our area. For designers, Belgium is a great place to be. You will find here many different sources of inspiration and an overwhelming feeling of freedom. The world centers of fashion and design are located just nearby.

At this stage, my company Queensberg takes care of design, development and production. Queensberg creates jewelry pieces based on my designs and distributes them, both directly and through partners. The companies can order my jewelry pieces directly from Queensberg.

A good designer should be professional in whatever he does. While having a good taste and style, he should feel the client needs and ensure the right quality. He should do things on time, the client does not have to run after the designer. Concerning the selection process, you may look into the designs and request for references. When you deal with new designers, you may interview them, just like when you would select a candidate. A good idea could be to order a small pilot design at moderate pricing conditions, this is how you can figure out whether the style and approach of this designer fits your company needs.

In most cases, I just get an idea and draw a sketch using a pencil and a sheet of paper. I like using pencil, because this is how I can easily translate my thoughts and emotions onto paper, and I can always erase something and change it. Then, depending on the design, I would either create the piece manually, or proceed with the 3D modeling. I control the 3D modeling process down to the finest details, to ensure that my ideas are reflected correctly.

Georg Jensen Heritage Jewelry pieces, my iPhone 7, a suit by Joseph Rybkoff, a Canadian mug by Oscardo, and my entire library of design books.

When at home, I would take a walk in the morning and get to my workshop. Have some client meetings. Relax, get inspired and create the sketches. Have a dinner with my family. But when I’m travelling, every day is quite different and not like another one.

Don’t be afraid to express yourself. Don’t be afraid to improve yourself and learn something new, even if it is complicated and takes time. Don’t stop and keep moving forward. And when you start growing and get recognition, remember your early days and those who were at your side and help you reach the success. And one more thing: “you are there for the clients”, not “clients are there for you”.

The positives are this unbelievable feeling when something new is born and the design appears on a sheet of paper out of nothing. Then it turns into a real piece, which you can enjoy looking at, and which you can touch. This piece finds her client and brings him joy, and I feel a little piece of that joy.
The negatives are that even your most favorite design would be appreciated by some people but completely disliked by the others, because a personal assessment of one or another design is always very subjective. Every person has her own taste, and it is important to learn appreciating negative feedback at least as much as the positive one. This is something that can be learned but it is not easy, especially in the beginning.

Keep all what is necessary and drop everything that is excessive. I know it sounds easy but it is not, especially for creative people.

There are creative skills that make the designer, such as the feeling of style, a rich fantasy, a taste, and a positive mindset. The practical skills are important as well, such as understanding the client, patience, being accurate, attentive, and doing things on time.

As a designer I have my paper, pencil and a lot of books as well. For 3D modeling, Gemvision Matrix is my favorite. As a jeweler I have to use dozens of tools and machines, in order to materialize any design idea that I might have. Over the years, this became more than a toolbox and turned into a real workshop to do everything from metalworking to casting to finishing to enameling to stone-setting.

This is rather easy for me. Thanks to my parents, from the very childhood I got used to plan my work and to set my priorities upfront. I am trying to stick to the plan in order to be on time, nevertheless I leave enough flexibility to cater for unforeseen changes.

It all depends on the design complexity. In my case, the first sketch would take between a few hours and a few days. The same concerns the 3D design. But I only consider the design as completed when the first jewelry piece has been produced. And sometimes this might take even a few weeks.

The most frequent question the people ask to me is “Did you create all these models yourself?”

As of today, I would certainly name the creation of Eternal Union and its preparation for “A’ Design Award” contest. I’m really glad I took this decision.

Technically speaking, my sole client is my company Queensberg. As of the time of this interview (April’17), the Queensberg’s clients are private individuals, however we are looking for distribution partnerships and corporate customers as well.

I enjoy all of them so much. But the very first step is probably most enjoyable, when the first sketch just appears out of nowhere.

On a creative side, one of the next projects is a new collection of metal-only designs. Most of these designs will have several pieces in every set, such as pendants, earrings and rings. Meanwhile, I will of course continue creating new designs with precious stones and enamel as well. I have plenty of new sketches in my notebook, and it keeps on growing as the new ideas keep on coming.
On a more business side, I plan to promote my company, Queensberg as a new brand. We are actively looking for distribution partners in Europe and worldwide, and are starting with an e-commerce shop soon.

I develop all designs fully myself. Because there are only 24 hours a day, I need to set my priorities. Therefore, my colleagues would often help me with practical things like 3D modeling, printing, casting, or others. I control the whole production and ensure that ideas are followed exactly to all finest details at every step.

From the most immediate ones, the Eternal Union pendant is going to get siblings. There are earrings coming up, and the work on a ring design is in progress as well.

The easiest is to contact me by e-mail through my company Queensberg, info@queensberg.com.