Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe nke Nobuaki Miyashita

Ihe emepụtara bụ Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe nke Nobuaki Miyashita bụ onye meriri a na-asọpụrụ nke ukwuu nke 2024 Ihe Nrite A' Design Award nke Ọlaedo na Udi Asọmpi Nhazi Ụlọ Owu, Ụlọ na Ihe Owuwu.

ỌlaedoỤlọ Owu· 2024

Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe

nke Nobuaki Miyashita

Onye Ahịa: Aida Sekkei Co., Ltd.

Onye Meriri Ihe Nrite A' Design Award nke Ọlaedo na Udi Ụlọ Owu

150,107

Onye Meriri Onyinye A Kwadoro

Nyochaa Ọnọdụ Onyinye maka #160159

Gaa Saịtị Lee na A' Design Award Akụkọ Mgbasa Ozi Akara Onyinye

Agba

Nhazi a

Maka Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe

Atụmatụ ụlọ ọrụ ọhụrụ Aida Sekkei lekwasịrị anya na ịkpụ osisi tupu oge. Echiche ya bụ ịmepụta ụlọ nke na-egosipụta usoro nhazi osisi. Ọ gụnyere ụzọ ije dị n'elu nke e ji enyo gbachie nke dị ihe dịka mita otu narị n'ogologo n'ime ụlọ ọrụ ahụ, nke e mere maka ndị ọbịa ka ha hụ usoro ịkpụ osisi ahụ niile anya. Ụlọ ọrụ ọfịsị ahụ nwere oghere buru ibu nke nwere ihe nkwado elu ụlọ e ji ihe nsọtụ osisi mee, bụ nke a na-ejikarị dịka ihe enyemaka n'ịrụ ụlọ osisi. Atụmatụ ahụ jikọtara ihe niile ọnụ iji mepụta ụlọ ọrụ ngosi, na-emesi ike na ịhụ anya na mma n'akụkụ niile.

Nkwanye Ugwu

Maka Ihe Nrite A' Design Award nke Ọlaedo

Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe meriri A' Design Award nke Ọlaedo, nnabata dị oke ugwu e nyere design ndị dị n'ọkwa mbụ, dị ịtụnanya ma pụtara ìhè. Ndị meriri na Ọlaedo bụ ihe e kere eke dị oke ọhụrụ, nwere ọhụụ ma na-egbu maramara nke na-egosipụta ọgụgụ isi, amamihe na nka nke ndị designer ha. A na-atụ anya na Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe ga-abụ ihe e mepụtara kacha enweta otuto, na-edu ọnọdụ ma bụrụ ihe ncheta nke na-enye uru na-adịbeghị mgbe ọ bụla. Design a meriri A' Design Award nke Ọlaedo bụ ọrụ dị ebube, a na-asọpụrụ nke na-erite uru buru ibu ma na-ebuga oke nka, sayensị, design na teknụzụ n'ihu. Aida Sekkei Precut Ụlọ Ọrụ Mmepụta Ihe na-eweta mmetụta ọchịchọ siri ike, na-akpali agụụ, na-akwado nzụlite ihe ma na-adọrọ anyị adọrọ.

N'azụ Nhazi a

Ngwugwu Mgbasa Ozi

Nkwurịta okwu, ndị otu na nkọwa teknụzụ nke onye nhazi nyere.

Àgwà Pụrụ Iche: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Nha & Mkpuchi: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Mkpado: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Teknụzụ Mmepụta: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Ịma Aka Imepụta: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Nchọpụta: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Mkpali: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Oge Ọrụ: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Usoro Ọrụ: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patentị: None
Asụsụ Foto: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020