Ihe emepụtara bụ Mira Oche nke Cemil Yavuz bụ onye meriri a na-asọpụrụ nke ukwuu nke 2021 Ihe Nrite A' Design Award nke Igwe na Udi Asọmpi Nhazi Ngwá Ụlọ.

IgweNgwá Ụlọ· 2021

Mira Oche

nke Cemil Yavuz

Onye Ahịa: Cemil Yavuz

Onye Meriri Ihe Nrite A' Design Award nke Igwe na Udi Ngwá Ụlọ

10,693

Onye Meriri Onyinye A Kwadoro

Nyochaa Ọnọdụ Onyinye maka #116467

Gaa Saịtị Lee na A' Design Award Akụkọ Mgbasa Ozi Akara Onyinye

Agba

Nhazi a

Maka Mira Oche

Mira bụ oche e chere maka iri nri na ịnọdụ ọdụ n'ozuzu ya. Ntọala ya bụ profaịlụ gburugburu atọ nke stainless steel. Profaịlụ abụọ na-agbagọ n'otu ọnụ ọgụgụ na n'otu ntụziaka, ebe nke atọ na-agbagọ n'ụzọ dị iche. Elu oche na azụ ya nke e ji akwa kpuchie bụ nke a na-atụnye na ntọala ahụ, ma ụkwụ rọba nwere ike ịgbanwe ogologo na-emecha oche a. Mira dị mfe ibu na enwere ike ịdozi ya gburugburu tebụl ma ọ bụ n'onwe ya. Enwere ike iji oche a na-adabere n'aka ekpe ma ọ bụ n'aka nri. A na-ebufe Mira n' akụkụ akụkụ ya na-ejikọtaghị, nke mere na ndị ọrụ ya nwere ike ijikọta oche ahụ mgbe ha wepụchara ya n'ime akpa.

Nkwanye Ugwu

Maka Ihe Nrite A' Design Award nke Igwe

Mira Oche meriri A' Design Award nke Igwe, nnabata dị ugwu e nyere design ndị dị mma nke na-emezu ihe ndị a chọrọ n'ọrụ na ụlọ ọrụ nke a na-atụ anya n'ihe e kere eke ndị e mere nke ọma. Ndị meriri na Igwe na-egosi nka buru ibu, ọkachamara dị elu, nghọta ọkachamara na ikike imepụta nke ndị kere ha. A na-atụ anya na Mira Oche ga-abụ ihe e kere eke a na-asọpụrụ nke ukwuu, a na-eto na a hụrụ n'anya nke bụ ihe bara uru ma dị ọhụrụ. Design a meriri A' Design Award nke Igwe na-ejikọta ụzọ kacha mma nke ụlọ ọrụ ma nwee àgwà teknụzụ kwesịrị ekwesị jikọtara na ihe ọmụma na talent. A na-asọpụrụ Mira Oche maka nlezianya ya ma e mere ya ka ọ nye mmeziwanye ndụ nke na-enyere aka ime ka ụwa bụrụ ebe ka mma.

N'azụ Nhazi a

Ngwugwu Mgbasa Ozi

Nkwurịta okwu, ndị otu na nkọwa teknụzụ nke onye nhazi nyere.

Àgwà Pụrụ Iche: Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
Nha & Mkpuchi: Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions.
Mkpado: Bending, Metal Profile, Chair, Simple, Elegant
Teknụzụ Mmepụta: The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
Ịma Aka Imepụta: Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
Nchọpụta: As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
Mkpali: In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
Oge Ọrụ: The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
Usoro Ọrụ: Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.