Aida Sekkei Precut Pabrik oleh Nobuaki Miyashita

Karya Aida Sekkei Precut Pabrik oleh Nobuaki Miyashita adalah pemenang yang sangat dihormati dari 2024 A' Design Award Emas yang sangat bergengsi dalam Kategori Kompetisi Desain Arsitektur, Bangunan dan Struktur.

EmasArsitektur· 2024

Aida Sekkei Precut Pabrik

oleh Nobuaki Miyashita

Klien: Aida Sekkei Co., Ltd.

Pemenang A' Design Award Emas dalam Kategori Arsitektur

150,107

Pemenang Penghargaan Terverifikasi

Verifikasi Status Penghargaan untuk #160159

Kunjungi Situs Lihat di A' Design Award Siaran Pers Lencana Penghargaan

Warna

Desain

Tentang Aida Sekkei Precut Pabrik

Rencana pabrik baru Aida Sekkei berfokus pada pra-pemotongan kayu. Konsepnya adalah menciptakan arsitektur yang mewujudkan rangkaian proses pengolahan kayu. Desain ini mencakup jembatan mengapung berdinding kaca sepanjang sekitar 100 meter di dalam pabrik, dirancang agar pengunjung dapat mengamati seluruh proses pra-pemotongan dari jarak dekat. Bangunan kantor menampilkan ruang-ruang luas dengan rangka kuda-kuda yang terbuat dari material tepi bersudut, yang umumnya digunakan sebagai material pelengkap pada rumah kayu. Desain ini mengintegrasikan seluruh elemen untuk menciptakan pabrik percontohan yang menekankan visibilitas dan daya tarik estetika di setiap aspeknya.

Pengakuan

Tentang A' Design Award Emas

Aida Sekkei Precut Pabrik adalah pemenang A' Design Award Emas, pengakuan yang sangat bergengsi yang diberikan kepada desain kelas satu, menakjubkan, dan menonjol. Pemenang Emas adalah kreasi yang sangat inovatif, visioner, dan berkilau memukau yang mencerminkan kejeniusan, kebijaksanaan, dan kepiawaian para desainernya. Aida Sekkei Precut Pabrik diharapkan menjadi penemuan yang sangat dipuji, perintis tren, dan monumental yang memberikan nilai tanpa preseden. Desain pemenang A' Design Award Emas ini adalah proyek yang spektakuler dan disegani yang sangat bermanfaat bagi dan memajukan batas-batas seni, sains, desain, dan teknologi. Aida Sekkei Precut Pabrik menciptakan perasaan keinginan yang kuat, membangkitkan gairah, mendorong kreativitas, dan memukau kita.

Di Balik Desain

Kit Pers

Kredit, anggota tim, dan detail teknis yang disediakan oleh desainer.

Keunikan: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Dimensi & Kemasan: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Tag: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Teknologi Produksi: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Tantangan Desain: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Riset: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspirasi: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Durasi Proyek: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Alur Operasi: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Paten: None
Kredit Gambar: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020