Ugrás a tartalomhoz
Halo Okos Sisak – tervező: Ather Design

Halo Okos Sisak – tervező: Ather Design – a rendkívül rangos 2025 Ezüstdíj A' Design Award díjazottja a Védőruházat és egyéni védőfelszerelés tervezése versenykategóriában.


EzüstVédőfelszerelés· 2025

Halo Okos Sisak

tervezte: Ather Design

Megbízó: Ather Energy

Ezüstdíj A' Design Award díjazott a Védőfelszerelés kategóriában

48,074

Színek

A Dizájn

A Halo Okos Sisak bemutatása

A Halo egy zárt (full-face) sisak, amelyet elektromos rollerrel közlekedők számára terveztek. A sisakhéj ISI és DOT minősítéssel rendelkezik, tömege körülbelül 1460 gramm. A beépített hangszórók támogatják a zenehallgatást, a hívásvezérlést, valamint a sisakok közötti kommunikációt a vezető és az utas között. A hangszórók elhelyezése és hangolása biztosítja, hogy az úttest zajai továbbra is hallhatók maradjanak. Az összes elektronikai alkatrész a héjon kívül, a fejtől távol, egy IP65 minősítésű, ütésálló házban kapott helyet. Az automatikus viselésérzékelés bekapcsolja a sisakot, amikor felveszik. A mágneses vezeték nélküli töltő a hátsó házhoz rögzül.

Az Elismerés

A Ezüstdíj A' Design Award díjról

Halo Okos Sisak az Ezüstdíj A' Design Award győztese, óriási presztízsű elismerés a csúcskategóriás, lenyűgöző és impozáns dizájnoknak. Az ezüstgyőztesek rendkívül ragyogó és nagyon kreatív művek, amelyek szemléltetik tervezőik kiemelkedő szakértelmét, tehetségét és éleslátását. Halo Okos Sisak-tól azt várják, hogy csodálatos, mintaszerű mű legyen, amely figyelemre méltóan professzionális és mélyen innovatív. Ez az Ezüstdíj A' Design Award kitüntetést elnyert dizájn igen figyelemre méltó, csodált találmány, amely szolgálja, és előre viszi a művészet, a tudomány, a dizájn és a technológia határait. Halo Okos Sisak széles körben irigyelt alkotás, amely felkelti a vágyakat, pozitív érzéseket hoz, és csodálatot és ámulatot gyújt.

A Dizájn Mögött

Sajtóanyag

A tervező által megadott közreműködők, csapattagok és technikai részletek.

Egyedi tulajdonságok
Ather Halo: A helmet you'd want to wear. Ather Halo is designed to uplift your every-day 2-wheeler ride experience. It does through high-quality audio experiences such as music, call control, and helmet-to-helmet communication for easy conversations between a rider and a pillion
Méretek és csomagolás
Shell Size: 350mm x 250mm x 260mm
Shell Weight: 1460g approx
Safety Rating: ISI and DOT

Electronic Specs
IP65 Rated housing
Battery Life: 12 hours
Battery Capacity: 1000mah
Címkék
AtherHalo, Halo, Halosmarthelmet, AtherHelmet, Halosmarthelmet, Halosmart
Gyártástechnológia
Ather Halo was built to be a helmet first. It is an isi and dot -rated helmet shell. To ensure safety, all its vital electronics have been housed outside of the helmet shell and away from the user's head in its own IP-rated impact-grade housing. The housing contains all the intelligence like the motherboard, a battery and a wireless coil with magnets to allow our wireless chargers to effortlessly latch on to the helmet.

AutoWearDetect: This is achieved through a contact-less proximity sensor inside the helmet and an Inertial Measuring Unit
Calibrated Sound: Through careful positioning and tuning of the speakers, Halo has been designed for audio without losing road awareness.
Onboard Media Controls: In combination with the Ather Rizta or the Ather 450 series, all control for music and call has been incorporated on the handlebar of the scooter itself, allowing you to never take your hands off the handle and fiddle around with the helmet during a ride.
Wireless Charging: To achieve a seamless and effortless charging experience, a Wireless charger with magnets has been built into the rear housing to allow you to latch our wireless charger or to allow you to simply place the helmet into the Ather Rizta under-seat storage and have it charge wirelessly in the storage itself.
-Noise Rejection in microphone: To allow a clear speech, the mic can reject any outside wind/traffic noise to make sure the person you're speaking to hears your voice clearly
Inspiráció
Its inspiration came accessories like the apple pencil and the airpods. While the idea of a bluetooth enabled helmet isnt entirely new, halo was built to add way more convenience and effortlessness when paired with a vehicle like the Rizta. I
-Auto Wear Detection lets it detect when it is being worn and power on/off automatically, allowing a rider seamless access to its audio experiences.
-Wireless charging allows it to provide effortless charging by latching our wireless charger to the helmet
Működési folyamat
Ather Halo is a full-face electric scooter helmet with built-in Bluetooth speakers (with sound by Harman Kardon). Its sound is designed so that, even at full volume, you can hear the surrounding sounds of the road clearly, making it completely safe to ride with. It’s built with Auto WearDetect automatically switches on the moment you wear it and connects to your smartphone's Bluetooth. And when your ride is done, and you store the Ather Halo in the boot of your Ather Rizta, it charges there, wirelessly.
Csapattagok
Deepanjan Sinha(Project Lead)
Mithilesh Katkar(Form Design)
Sounak Purkayastha(Digital Sculptor)
Chetan Rajesh(Industrial Designer)
Darshan Patel(Industrial Designer)
Képek forrása
Damn Good Films

Szponzorált

Fedezzen fel többet a Designers.org-on túl

Fedezze fel hirdetési partnereink termékeit, szolgáltatásait és lehetőségeit.

A jó design nagyszerű elismerést érdemel

Az A' Design Award nemzetközi, zsűrizett elismerés a kiváló designért. Vegyen részt az A' Design Award pályázatán, hogy lehetőséget kapjon érdemeken alapuló elismerésre, hírnévre, presztízsre és munkája népszerűsítésére. Nevezze be alkotását az A' Design Award díjra, és versenyezzen az áhított A' Design Prize-ért.

Nevezés