Oak Konan Shinagawa Bilding Biwo pa Obayashi Corporation

Dizayn Oak Konan Shinagawa Bilding Biwo pa Obayashi Corporation se yon gayan ki gen anpil estim nan konpetisyon trè prestijye 2023 A' Design Award Ajan nan Kategori Konpetisyon Achitekti.

AjanAchitekti· 2023

Oak Konan Shinagawa Bilding Biwo

pa Obayashi Corporation

Kliyan: Obayashi-Shinseiwa Real Estate Corporation

Gayan A' Design Award Ajan nan Kategori Achitekti

18,291

Gayan Pri Verifye

Verifye Estati Pri pou #149620

Gade sou A' Design Award Kominike Laprès Badj Prim

Koulè

Konsepsyon an

Konsènan Oak Konan Shinagawa Bilding Biwo

Oak Konan Shinagawa se yon bilding biwo 12 etaj ki sitiye toupre pò a nan Tokyo, Japon. Ankadreman eksteryè blan an ki sanble ak yon très se yon kokiy eksteryè ki fèt ak beton prefabrike ki sèvi ni kòm estrikti pòtè ni kòm dispozitif pwoteksyon kont solèy. Ansanm ak konstriksyon an asye nan nwayo a, estrikti ibrid sa a kreye yon espas biwo san poto ki pèmèt amenajman fleksib. Poto ak pout prefabrike yo pwodui andeyò chantye a epi yo desann yo an plas soti anlè, sa ki senplifye travay sou chantye a. Fenèt eksteryè yo gen inite vantilasyon natirèl ki ouvri ak yon manch detachab.

Rekonesans lan

Konsènan A' Design Award Ajan

Oak Konan Shinagawa Bilding Biwo se yon ganyan A' Design Award Ajan, yon rekonesans ki gen yon prestij enmans yo bay design nivo siperyè, bèl anpil e enpresyonan. Ganyan Ajan yo se travay ki trè briyan e ki trè kreyatif ki montre ekspètiz, talan ak finès designer yo. Yo atann Oak Konan Shinagawa Bilding Biwo pou se yon bèl travay modèl, remakab nan pwofesyonalis e ki gen gwo inovasyon. Design sa a ki ganyen A' Design Award Ajan se yon envansyon trè remakab, admire ki pote benefis e ki pouse limit atizay, syans, design ak teknoloji. Oak Konan Shinagawa Bilding Biwo se yon kreyasyon anpil moun jalou ki reveye dezi, ki pote santiman pozitif e ki limen sipriz ak mèvèy.

Dèyè Konsepsyon an

Dosye Laprès

Kredi, manm ekip ak detay teknik konseptè a bay.

Pwopriyete Inik: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
Dimansyon & Anbalaj: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Etikèt: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Teknoloji Pwodiksyon: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Defi Dizayn: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Rechèch: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Enspirasyon: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Dire Pwojè: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Fliks Operasyon: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Manm Ekip: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Kredi Imaj: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022