Dizayn Hexa Limyè pa Sepehr Mehrdadfar se yon gayan ki gen anpil estim nan konpetisyon trè prestijye 2023 A' Design Award Ajan nan Kategori Konpetisyon Ekleraj.

AjanEkleraj· 2023

Hexa Limyè

pa Sepehr Mehrdadfar

Kliyan: Hamoun Design and Idea

Gayan A' Design Award Ajan nan Kategori Ekleraj

45,061

Gayan Pri Verifye

Verifye Estati Pri pou #148179

Gade sou A' Design Award Kominike Laprès Badj Prim

Koulè

Konsepsyon an

Konsènan Hexa Limyè

Objektif konsepsyon Hexa a te pou reyalize yon lanp ki bay eklèraj espas achitektiral la nan de mòd laj ak lokalize, ki gen kapasite pou ekspanse nan espas la, epi ki amelyore kalite espas la nan tèm estetik. Yon Hexa se yon tyè nan yon egzagòn konplè. Divizyon sa a ogmante kapasite Hexa nan varyete konpozisyon ak ekspansyon. Fòm konsepsyon an swiv yon modèl jewometrik ki enspire pa "Girih" ak "minyati" nan dekorasyon achitektiral tradisyonèl Iranyen.

Rekonesans lan

Konsènan A' Design Award Ajan

Hexa Limyè se yon ganyan A' Design Award Ajan, yon rekonesans ki gen yon prestij enmans yo bay design nivo siperyè, bèl anpil e enpresyonan. Ganyan Ajan yo se travay ki trè briyan e ki trè kreyatif ki montre ekspètiz, talan ak finès designer yo. Yo atann Hexa Limyè pou se yon bèl travay modèl, remakab nan pwofesyonalis e ki gen gwo inovasyon. Design sa a ki ganyen A' Design Award Ajan se yon envansyon trè remakab, admire ki pote benefis e ki pouse limit atizay, syans, design ak teknoloji. Hexa Limyè se yon kreyasyon anpil moun jalou ki reveye dezi, ki pote santiman pozitif e ki limen sipriz ak mèvèy.

Dèyè Konsepsyon an

Dosye Laprès

Kredi, manm ekip ak detay teknik konseptè a bay.

Pwopriyete Inik: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A Hexa is one third of a full hexagon. This division increases the ability of Hexa in the variety of composition and expansion.
Dimansyon & Anbalaj: Length of each module: 770 mm
height of profile: 40 mm
width of profile: 20 mm
Etikèt: Geometry, Persian Miniature, Muqarnas, Texture, Wide lighting,Geometric expansion, Dynamics and movement, Simple connections
Teknoloji Pwodiksyon: Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
Defi Dizayn: It was important to choose the appropriate geometric shape as the initial model. Odd polygons do not extend in a straight line, but even polygons do. In the end, a hexagon was chosen because it formed a more complex structure than a quadrilateral and simpler than a higher degree pair of polygons.
Rechèch: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.

The form of this work follows a geometric pattern that is inspired by "knotting" and "miniature" in traditional Iranian architectural decorations.
To achieve this form, all kinds of geometric shapes such as regular, irregular, odd and even polygons were tested, and in this process "hexagon" was chosen as the primary model because:
Due to the type of internal angles, the shapes with odd sides were oriented in geometric expansion and had less compatibility with general architectural plans, so their use in internal architecture required more and more complex control.
- The hexagonal pattern, when expanded, creates a far more "eye-catching" context than the quadrilateral and "simpler" than the higher degrees of the polygons.
In the next step, the hexagonal pattern was divided into smaller parts, and at the end, a line segment with a curve corresponding to the internal angle of the hexagon was selected as the main module of the design. In fact, a hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.
Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble", "move and replace" and finally, the user can easily control the light network.
Enspirasyon: The form of this design follows a geometric pattern that is inspired by "Girih" and "miniature" in traditional Iranian architectural decorations.
Girih ( "knot", also written gereh) are decorative Islamic geometric patterns used in architecture and handicraft objects, consisting of angled lines that form an interlaced strapwork pattern.
Dire Pwojè: This project designed in 2022 in Tehran, Iran.
Fliks Operasyon: The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble",
"move and replace" and finally, the user can easily control the light network.
Kredi Imaj: saeed MirTahmasb
maryam saeedpoor