Vista EY2T Motorizirana biometrijska kamera za identifikaciju – dizajner Chris Dopp & Travis Baldwin

Dizajn Vista EY2T Motorizirana biometrijska kamera za identifikaciju čiji je autor Chris Dopp & Travis Baldwin iznimno je cijenjeni dobitnik prestižne nagrade 2015 Srebrna nagrada A' Design Award u natjecateljskoj kategoriji Sigurnosni, Zaštitni i Nadzorni Proizvodi.

SrebroSigurnosni Proizvodi· 2015

Vista EY2T Motorizirana biometrijska kamera za identifikaciju

autor/ica Chris Dopp & Travis Baldwin

Klijent: Vista Imaging and Crea Inc Design LTD

Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Sigurnosni Proizvodi

25,961

Potvrđeni dobitnik nagrade

Provjerite status nagrade za #40052

Posjetite stranicu Pogledajte na A' Design Award Priopćenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Vista EY2T Motorizirana biometrijska kamera za identifikaciju

Vista EY2T je motorizirana biometrijska kamera za prepoznavanje irisa i lica. Uređaj skenira vidno polje u potrazi za licima, a zatim motori zakreću kameru da bi je usmjerili prema očima. Široki raspon infracrvenih LED dioda i sustav autofokusa omogućuju snimanje na udaljenosti od 3 do 6 stopa, tako da nije potrebno ručno usmjeravanje. Devet prednjih senzora ujedinjeno je iza jedne jedinstvene crne površine, a cilindrični oblik u obliku kapsule sa zaobljenim krajevima stvara smiren i neprijeteći izgled. Kamera se može koristiti samostalno ili uz zidni nosač.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Vista EY2T Motorizirana biometrijska kamera za identifikaciju je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i dojmljivim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Vista EY2T Motorizirana biometrijska kamera za identifikaciju bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomiče granice umjetnosti, znanosti, dizajna i tehnologije. Vista EY2T Motorizirana biometrijska kamera za identifikaciju je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.

Iza dizajna

Komplet za medije

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Dimenzije i pakiranje: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Oznake: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Proizvodna tehnologija: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Dizajnerski izazov: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Istraživanje: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspiracija: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Trajanje projekta: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Tijek rada: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Članovi tima: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Zasluge za fotografije: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015