Dizajn Wall V4 Stalak za televizor čiji je autor Nakamura Co. iznimno je cijenjeni dobitnik prestižne nagrade 2023 Srebrna nagrada A' Design Award u natjecateljskoj kategoriji Dizajn Namještaja.
SrebroNamještaj· 2023
Wall V4 Stalak za televizor
autor/ica Nakamura Co.
Klijent: Wall
Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Namještaj
Potvrđeni dobitnik nagrade
Provjerite status nagrade za #148555Dizajn
O dizajnu Wall V4 Stalak za televizor
Wall V4 je samostojeći stalak za televizor dizajniran za držanje velikih ekrana blizu zida. Televizori do 90 inča mnogih proizvođača mogu se sigurno montirati na željenu visinu. Noseći stup nudi osam razina visine od po 5 mm. Kabeli i vijci skriveni su unutar dvoslojne ploče, tako da postav ostaje uredan. Baza je izrađena od čelične ploče debljine 2 mm oblikovane prešanjem i ojačane radijalnim okvirom, što rub čini tankim i smanjuje rizik od spoticanja. Sastavljanje je jednostavno i ne zahtijeva nikakve preinake prostorije.
Priznanje
O nagradi Srebrna nagrada A' Design Award
Wall V4 Stalak za televizor je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i dojmljivim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Wall V4 Stalak za televizor bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomiče granice umjetnosti, znanosti, dizajna i tehnologije. Wall V4 Stalak za televizor je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.
Iza dizajna
Komplet za medije
Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.
- Jedinstvena svojstva
- With WALL V4, almost any TV can be mounted neatly by hanging it on the wall.
Large size TVs (up to 90 inch) from various manufacturers can be installed safely at the preferred height of users. Assembly work is quite simple and requires no special revamping in the room. No wirings or screws are visible externally bringing a sense of harmony and unity with the interior of the user’s living environment. - Dimenzije i pakiranje
- Width 830mm x Depth 520mm x Height 1265mm
- Oznake
- TV stand, interior, TV accessory, caster, cable storage, audio-visual experience, space-saving design,
- Proizvodna tehnologija
- The structure is based on a 2 mm steel plate that was pressed into a 3D shape and supported by a radial frame in order to achieve a thickness of 2 mm between the base and the floor. The supporting pillar and cables are hidden inside a double-layered panel, The panel slides along that extends when changing the height. Satin powder coating was applied to the entire body, and a woodgrain finish was baked on the surface of the panel giving a texture of high-quality furniture.
- Dizajnerski izazov
- The challenge was to secure strength in a very thin base structure. Since an iron plate alone does not have enough strength, the base includes a set of enforcing elements radially arranged to complement the strength of the 2 mm plate. This structure provides visual neatness and effective spatial utilization. This method proved its effectiveness through repeated vibration tests in a lab that can simulate the strongest earthquakes in Japan.
- Istraživanje
- As conventional TV benches/stands are usually too bulky and easily stands out in a confined room space, our design focused on bringing the TV as close as possible to the wall by reducing the TV stand’s thickness and hiding the TV wiring. Based on the knowledge that a step of 3 mm on the floor can stumble a person, we focused our attention to reduce the thickness of the base for safety reasons so that it makes a simpler and more organized setup.
- Inspiracija
- The impetus for developing this new TV stand was to reduce wasted space.
As the size of TVs becomes larger, TV boards are also getting bigger. As for wall-mounted TVs, they require installation work and repeated height adjustment will become a cumbersome process.
WALL V4 provides a solution to such difficulties. - Trajanje projekta
- The project started in October 2020, and its development was completed in November 2021. The product was put into the market in January 2022.
- Tijek rada
- The height of the supporting column can be adjusted with 8 levels (of 5 mm each). Since the metal bracket matches the shape of the back of the TV, it allows fine positional adjustment. Most TV types can be installed at the users’ preferred height. Optional shelves can also be added to expand this TV stand to suit the needs of all users.
- Patenti
- Design Registration No. (Japan): 1614420, 1623536
Patent Registration No. (Japan): 6865495, 6867075
Patent Application No. (Japan): 2020-540017
Design Registration No. (International): DM/101626
Design Registration No. (U.S.): US D881,174 - Članovi tima
- Producer : Akira Nakamura
Designer : Hiroshi Tozawa
Designer : Toshiaki Komori
Supply Chain Manager : Naohisa Inoue - Zasluge za fotografije
- Image #1: Photographer Nakamura Co.Variations, 2021.
Image #2: Photographer Nakamura Co.Variations, 2021.
Image #3: Photographer Nakamura Co.Variations, 2021.
Image #4: Photographer Nakamura Co.Variations, 2021.
Image #5: Photographer Nakamura Co.Variations, 2021.
Sponzorirano
Istražite izvan Designers.org
Otkrijte proizvode, usluge i prilike naših oglašivačkih partnera.
Istražite više
Srodni dizajni
Istražite više nagrađivanih dizajna iz iste kategorije, odabranih prema zaslugama.