Zane Planck Tebur Kofi daga Kristof De Bock mai nasara ne mai daraja sosai na 2020 Kyautar A' Design Award ta Zinariya a Rukunin Gasar Ƙirar Kayan Ɗaki.

ZinariyaKayan Ɗaki· 2020

Planck Tebur Kofi

daga Kristof De Bock

Abokin Ciniki: Dasein Products

Mai Nasarar Kyautar A' Design Award ta Zinariya a Rukunin Kayan Ɗaki

62,500

Mai Nasara da Aka Tabbatar

Tabbatar da Matsayin Kyauta na #93711

Ziyarci Shafin Duba a A' Design Award Sanarwar Manema Labarai Alamar Kyauta

Launuka

Ƙirar

Game da Planck Tebur Kofi

Tebur ɗin an yi shi da nau'i-nau'i daban-daban na faranti waɗanda aka goge su tare a ƙarƙashin matsin lamba. Fuskokin an kera su kuma an yi musu barazanar katifa mai tsananin ƙarfi. Akwai matakan 2 - tunda ciki na teburin ba m - wanda yake da amfani sosai don sanya mujallu ko filato. A ƙarƙashin teburin akwai ginannu a cikin ƙafafun harsashi. Don haka rata tsakanin bene da tebur ƙaramin ne, amma a lokaci guda, yana da sauƙi don matsawa. Hanyar da ake amfani da plywood (a tsaye) yana sa ya zama mai ƙarfi sosai.

Amincewa

Game da Kyautar A' Design Award ta Zinariya

Zanen Planck Tebur Kofi ya lashe Kyautar A' Design Award ta Zinariya, wata karramawa mai matuƙar daraja da ake bai wa zane-zane na matakin farko, masu ban mamaki kuma na musamman. Waɗanda suka lashe kyautar Zinariya ƙirƙire-ƙirƙire ne masu sababbin abubuwa sosai, masu hangen nesa kuma masu haske mai ban sha'awa waɗanda ke nuna hazaƙa, hikima da ƙwarewar masu zanensu. Ana sa ran zanen Planck Tebur Kofi ya zama ƙirƙira mai yabo sosai, mai kafa yanayi kuma babba wacce ke kawo ƙima da ba a taɓa ganin irinta ba. Wannan zane da ya lashe Kyautar A' Design Award ta Zinariya aiki ne mai ban mamaki, mai daraja wanda ke amfanar fasaha, kimiyya, zane da fasahar zamani sosai kuma yana kai iyakokinsu gaba. Zanen Planck Tebur Kofi yana haifar da tsananin sha'awa, yana tada soyayya ga aiki, yana ƙarfafa ƙirƙira kuma yana burge mu.

Bayan Ƙirar

Kayan Manema Labarai

Bayanin ƙungiyar, membobinta da cikakkun bayanai na fasaha da mai ƙirar ya bayar.

Siffofi Na Musamman: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
Girma da Fakitin: Width 75 cm x Depth 46 cm x Height 30 cm
Kalmomin Alama: Objectdesign, coffeetable, furniture, living room
Fasahar Samarwa: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
Ƙalubalen Zane: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
Bincike: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
Wahayi: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
Tsawon Lokacin Aikin: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
Tsarin Aiki: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
Mambobin Ƙungiya: Kristof De Bock
Godiyar Hotuna: Photograper Pieter Gregoire