Zane 5x5 Kujera daga Barbara Princic mai nasara ne mai daraja sosai na 2014 Kyautar A' Design Award ta Azurfa a Rukunin Gasar Ƙirar Kayan Ɗaki.

AzurfaKayan Ɗaki· 2014

5x5 Kujera

daga Barbara Princic

Abokin Ciniki: Sijaj Hrastnik

Mai Nasarar Kyautar A' Design Award ta Azurfa a Rukunin Kayan Ɗaki

35,703

Mai Nasara da Aka Tabbatar

Tabbatar da Matsayin Kyauta na #31513

Ziyarci Shafin Duba a A' Design Award Sanarwar Manema Labarai Alamar Kyauta

Launuka

Ƙirar

Game da 5x5 Kujera

Kujerar 5x5 wani aikin zane ne na yau da kullun inda aka gane iyakance azaman ƙalubale. Kujerar kujera da ta baya an yi su ne a lokacin xilith wanda yake da matukar wahalar fastawa. Xilith shine albarkatun ƙasa wanda za'a iya samun mita 300 a ƙarƙashin ƙasa kuma an haɗa shi da mai. A halin yanzu ana jefa yawancin albarkatun ƙasa. Daga mahangar muhalli wannan kayan yana haifar da sharar gida a doron kasa. Saboda haka ra'ayin game da ƙirar kujerar ya zama kamar yana da matukar tayar da hankali kuma yana da ƙalubale.

Amincewa

Game da Kyautar A' Design Award ta Azurfa

Zanen 5x5 Kujera ya lashe Kyautar A' Design Award ta Azurfa, wata karramawa mai tsananin daraja da ake bai wa zane-zane na matakin koli, masu kyau sosai kuma masu burgewa. Waɗanda suka lashe kyautar Azurfa ayyuka ne masu haske sosai da ƙirƙira mai yawa waɗanda ke nuna ƙwarewa, baiwa da kaifin tunanin masu zanensu. Ana sa ran zanen 5x5 Kujera ya zama aiki mai ban mamaki, abin koyi, mai ƙwarewa sosai kuma mai ƙirƙire-ƙirƙire mai zurfi. Wannan zane da ya lashe Kyautar A' Design Award ta Azurfa ƙirƙira ce mai abin lura sosai, da ake sha'awa, wacce ke amfanar da kuma kai iyakokin fasaha, kimiyya, zane da fasahar zamani gaba. Zanen 5x5 Kujera ƙirƙira ce da ake yi wa hassada sosai wacce ke tada sha'awa, tana kawo jin daɗi kuma tana haifar da mamaki da al'ajabi.

Bayan Ƙirar

Kayan Manema Labarai

Bayanin ƙungiyar, membobinta da cikakkun bayanai na fasaha da mai ƙirar ya bayar.

Siffofi Na Musamman: The 5x5 chair is a typical design project where the limitation is recognized as a challenge. The chair's seat and the back are made of xilith which is very difficult to be shaped. Xilith is the raw material that can be found 300 meters under the ground surface and is comined with a coal. But it is nither the coal nor the wood. Currently the majority of the raw material is thrown away. From environmental point of view this material generates waste on the earth surface. Therefore the idea about chair design seemed to be very provocative and challenging. The scientific methods of the material's final surface treatment have been explored so if applied properly the final look can be close to that of ebony.
Each chair is unique as neither two tiles look the same. Therefore the chair can have more brown or more black look depending on the tiles collected together.
Girma da Fakitin: Width 470 mm x Depth 540 mm x Hight 840 mm
Kalmomin Alama: xilith, tiles, metal, elegant, thin, material innovation, experiment
Fasahar Samarwa: Chair's structure:
- metal tub legs, surface nickel treated
- seat and back support made of laser cutted metal sheet, surface nickel treated
- Xilith tiles, cut, surface treated with linseed oil;
tiles glued on metal sheet surface
Ƙalubalen Zane: Material's unique visual properties, physical characteristics and manufacturing limitations were challenging.
The design challenge was simply how to make a chair from little tiles? how to connect them? How to make the underneath seat's metal sheet stiff but yet almost invisible, thin.
Bincike: It was all about experimental work with this unique material. The scientific methods of surface treatment were examined years before within Biotechnological Faculty, University of Ljubljana. If the surface is treated properly, the outcome look is similar to ebony.
Wahayi: As explained in the project explanation; material's unique visual properties, physical characteristics and manufacturing limitations were challenging.
Xilith is the raw material that is very hard and fragile. Therefore the tile's dimension 5x5 cm is the maximum still acceptable dimension for manufacturing since the material itself is very difficult to be manufactured and shaped.
Tsawon Lokacin Aikin: The project started in May 2008 and finished in October 2008 in Slovenia. It was exhibited at several exhibitions like
- Month of Design, October 2008, Ljubljana, Slovenia
- Reader-friendly Design, January 2010, Ljubljana, Slovenia
- The Design Assembly, May 2010, Graz, Austria
- IDEA Award Winners and Finalists exhibition, August 2010, Henry Ford Museum, Michigan USA
- Charm of wood, spring 2011, Ljubljana, Slovenia
- Ambient, furniture fair, October 2013, Ljubljana, Slovenia
Tsarin Aiki: It enables very comfortable and ergonomic sitting.
Mambobin Ƙungiya: Barbara Princic, designer
Mr. Miran Drac, technologist
Godiyar Hotuna: Images No.1-5, photographer Miha Benedicic, 5x5 chair, 2009.