Hydrospine O Lastre De Apnea de Ludovic Lahccen and Raoul Morel

O deseño Hydrospine O Lastre De Apnea de Ludovic Lahccen and Raoul Morel é un estimado gañador do moi prestixioso 2023 A' Design Award de Prata na Categoría de Competición Deseño de Artigos Deportivos, Fitness e Equipos de Recreación.

PrataArtigos Deportivos· 2023

Hydrospine O Lastre De Apnea

de Ludovic Lahccen and Raoul Morel

Cliente: Apnea Sub

Gañador do A' Design Award de Prata na Categoría Artigos Deportivos

756,911

Gañador de Premio Verificado

Verificar o Estado do Premio para #148412

Visitar sitio Ver en A' Design Award Nota de prensa Distintivo do premio

Cores

O Deseño

Sobre Hydrospine O Lastre De Apnea

Sistema de peso traseiro para apnea, que permite un equilibrio e flotabilidade ultra precisos. As súas virtudes, a súa capacidade de carga modular e rápida, de ata 6 kg, utilizable en calquera posición, calquera disciplina de apnea. Está equipado cunha liberación rápida e fibelas de axuste para axustarse a diferentes tamaños, calquera que sexa o sexo, ofrecendo unha comodidade incrible que che fai esquecer rapidamente o peso que leva. O seu deseño nace da fusión de animais mariños e aparellos creados para que a velocidade lle dote de liñas moi hidrodinámicas e ofreza un deslizamento óptimo baixo a auga. A súa versatilidade fai que sexa un concepto único

O Recoñecemento

Sobre o A' Design Award de Prata

Hydrospine O Lastre De Apnea gañou o A' Design Award de Prata, un recoñecemento enormemente prestixioso outorgado a deseños de gama alta, fermosos e impresionantes. Os gañadores Prata son obras tremendamente brillantes e sumamente creativas que ilustran a pericia, o talento e a agudeza sobresaíntes dos seus deseñadores. Espérase que Hydrospine O Lastre De Apnea sexa unha obra marabillosa, escaparate de oficio, notablemente profesional e profundamente innovadora. Este deseño gañador do A' Design Award de Prata é unha invención moi notable e admirada que beneficia e fai avanzar os límites da arte, a ciencia, o deseño e a tecnoloxía. Hydrospine O Lastre De Apnea é unha creación moi envexada que esperta desexos, achega sentimentos positivos e prende asombro e marabilla.

Detrás do deseño

Kit de prensa

Créditos, membros do equipo e detalles técnicos proporcionados polo deseñador.

Propiedades Únicas: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimensións e Embalaxe: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Etiquetas: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Tecnoloxía de Produción: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Reto de Deseño: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Investigación: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspiración: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Duración do Proxecto: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Fluxo de Operacións: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patentes: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Membros do Equipo: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Créditos das Imaxes: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel