Planck Tha Bòrd Cofaidh le Kristof De Bock

Tha Planck Tha Bòrd Cofaidh le Kristof De Bock na bhuannaiche air leth urramach anns an fharpais chliùitich 2020 Duais Òir A' Design Award ann an Roinn Farpais Dealbhadh Àirneis.

ÒrÀirneis· 2020

Planck Tha Bòrd Cofaidh

le Kristof De Bock

Neach-ceannach: Dasein Products

Buannaiche Duais Òir A' Design Award ann an Roinn Àirneis

62,500

Buannaiche Duais Dearbhaichte

Dearbhaich Inbhe na Duaise airson #93711

Tadhail air an Làrach Seall aig A' Design Award Brath Naidheachd Suaicheantas Duaise

Dathan

An Dealbhadh

Mu dheidhinn Planck Tha Bòrd Cofaidh

Tha an clàr air a dhèanamh de dhiofar phìosan de phlywood a tha air an glaodhadh ri chèile fo chuideam. Tha na h-uachdaran air an còmhdach le gainmheach agus air an bagairt le varnish matt agus làidir. Tha 2 ìre ann - tha taobh a-staigh a ’bhùird falamh - rud a tha gu math practaigeach airson a bhith a’ cur irisean no plaidean. Fon bhòrd tha cuibhlichean peileir air an togail. Mar sin tha am beàrn eadar làr is bòrd gu math beag, ach aig an aon àm, tha e furasta gluasad. Tha an dòigh anns a bheil am plywood air a chleachdadh (inghearach) ga dhèanamh gu math làidir.

An Aithneachadh

Mu dheidhinn Duais Òir A' Design Award

Tha Planck Tha Bòrd Cofaidh air Duais Òir A' Design Award a bhuannachadh, aithneachadh anabarrach urramach a bheirear do dhealbhaidhean den chiad ìre, mìorbhaileach agus sònraichte. Tha buannaichean Òir nan cruthachaidhean anabarrach ùr-ghnàthach, làn lèirsinn agus drùidhteach a nochdas gèinidh, gliocas agus comas an luchd-dealbhaidh. Thathar an dùil gum bi Planck Tha Bòrd Cofaidh na innleachd a gheibh moladh mòr, a stèidhicheas gluasadan agus mòr-chuimhneachain a bheir luach nach fhacas riamh roimhe. Tha an dealbhadh seo a bhuannaich Duais Òir A' Design Award na phròiseact sònraichte, urramach a bhrosnaicheas crìochan ealain, saidheans, dealbhaidh agus teicneolais gu mòr. Bidh Planck Tha Bòrd Cofaidh a' cruthachadh faireachdainnean làidir miann, a' dùsgadh dealas, a' brosnachadh cruthachalachd agus a' glacadh sinn.

Air Cùl an Dealbhaidh

Pasgan Naidheachd

Creideasan, buill sgioba agus fiosrachadh teicnigeach a chuir an dealbhaiche ri chèile.

Feartan Sònraichte: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
Tomhasan & Pacadh: Width 75 cm x Depth 46 cm x Height 30 cm
Tagaichean: Objectdesign, coffeetable, furniture, living room
Teicneòlas Cinneasachaidh: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
Dùbhlan Dealbhaidh: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
Rannsachadh: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
Brosnachadh: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
Faid a' Phròiseict: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
Sruth Obrachaidh: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
Buill na Sgioba: Kristof De Bock
Creideasan Dhealbhan: Photograper Pieter Gregoire