Sprout Rothar le JunXiang Cheng and Yi Yang

Tha Sprout Rothar le JunXiang Cheng and Yi Yang na bhuannaiche air leth urramach anns an fharpais chliùitich 2022 Duais Iarainn A' Design Award ann an Roinn Farpais Dealbhadh Cruthan agus Thoraidhean Clò-bhualaidh 3D.

IarannClò-bhualadh 3D· 2022

Sprout Rothar

le JunXiang Cheng and Yi Yang

Neach-ceannach: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Buannaiche Duais Iarainn A' Design Award ann an Roinn Clò-bhualadh 3D

32,018

Buannaiche Duais Dearbhaichte

Dearbhaich Inbhe na Duaise airson #137286

Seall aig A' Design Award Brath Naidheachd Suaicheantas Duaise

Dathan

An Dealbhadh

Mu dheidhinn Sprout Rothar

Is rothar é Sprout a tháirgtear trí phriontáil tríthoiseach. Múnlaítear an fráma trí bharrfheabhsú topaíochta, rud a chuireann ábhar ann díreach san áit a bhfuil sé riachtanach agus a laghdaíonn an méid iomlán a úsáidtear. Deimhníonn anailís struis statach leis an modh eilimintí teoranta cobhsaíocht struchtúr an fhráma. Priontáiltear an múnla deiridh i níolón dlúis arda. Tá an rothar 1630 mm ar fad, 600 mm ar leithead agus 832 mm ar airde. Baineann priontáil an gá le múnlaí costasacha, rud a chiallaíonn gur féidir le gach fráma dearadh aonair a leanúint.

An Aithneachadh

Mu dheidhinn Duais Iarainn A' Design Award

Tha Sprout Rothar air Duais Iarainn A' Design Award a bhuannachadh, aithneachadh urramach a bheirear do dhealbhaidhean math a choinnicheas ris na riatanasan proifeiseanta is gnìomhachais a thathar a' sùileachadh bho chruthachaidhean a chaidh an dealbhadh gu math. Tha buannaichean Iarainn a' nochdadh sgil mhòr, speisealachadh àrd, tuigse eòlaiche agus comas cruthachail an luchd-cruthachaidh. Thathar an dùil gum bi Sprout Rothar na chruthachadh air a bheil mòran meas, ion-mholta agus gràdhach a tha practaigeach agus ùr-ghnàthach. Tha an dealbhadh seo a bhuannaich Duais Iarainn A' Design Award a' cur nan cleachdaidhean as fheàrr sa ghnìomhachas còmhla agus tha feartan teignigeach comasach aige ceangailte ri eòlas-dèanamh agus tàlant. Tha meas air Sprout Rothar airson a dhùrachd agus chaidh a dhealbhadh gus leasachaidhean càileachd beatha a thoirt seachad a chuidicheas le bhith a' dèanamh an t-saoghail na àite nas fheàrr.

Air Cùl an Dealbhaidh

Pasgan Naidheachd

Creideasan, buill sgioba agus fiosrachadh teicnigeach a chuir an dealbhaiche ri chèile.

Feartan Sònraichte: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Tomhasan & Pacadh: Length 1630mm, width600mm, height 832mm
Tagaichean: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Teicneòlas Cinneasachaidh: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Dùbhlan Dealbhaidh: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Rannsachadh: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Brosnachadh: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Faid a' Phròiseict: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Sruth Obrachaidh: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Buill na Sgioba: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao