Quintessence Spectrum Series Lampa Bhoird Iniompartha le Jeffrey Geiringer

Is buaiteoir an-mheasúil den ghradam fíor-ardghradamach 2024 Duais Cré-umha A' Design Award sa Chatagóir Comórtais Dearadh Priontála 3T é an dearadh Quintessence Spectrum Series Lampa Bhoird Iniompartha le Jeffrey Geiringer.

Cré-umhaPriontáil 3T· 2024

Quintessence Spectrum Series Lampa Bhoird Iniompartha

le Jeffrey Geiringer

Cliant: Quintessence Lighting

Buaiteoir an ghradaim Duais Cré-umha A' Design Award sa Chatagóir Priontáil 3T

40,659

Buaiteoir Gradaim Fíoraithe

Fíoraigh Stádas Gradaim do #159084

Tabhair Cuairt ar an Suíomh Féach ag A' Design Award Preasráiteas Suaitheantas Gradaim

Dathanna

An Dearadh

Maidir le Quintessence Spectrum Series Lampa Bhoird Iniompartha

Is eagrán teoranta é Sraith Speictream de lampaí boird iniompartha le scáthláin laitíse a phriontáiltear go tríthoiseach. Gintear gach lampa trí phróiseas paraiméadrach, agus dá bhrí sin bíonn gach imlíne agus patrún laitíse difriúil óna chéile. Priontáiltear na scáthláin as PLA athchúrsáilte ag baint úsáide as cód meaisín a scríobhadh go sonrach chun na críche seo, rud a thugann línte laitíse glana beachta. Cuireann an bonn i gcuimhne duit seanchoinnleoir agus is féidir é a iompar ar a chos. Lasann agus laghdaítear an lampa cadhnra-chumhachtaithe trí chnaipe beag ar an mbonn a bhrú. Ní tháirgtear gach lampa ach uair amháin agus tagann deimhniú barántúlachta leis.

An Aitheantas

Maidir leis an Duais Cré-umha A' Design Award

Bhuaigh an dearadh Quintessence Spectrum Series Lampa Bhoird Iniompartha Duais Cré-umha A' Design Award, aitheantas an-ghradamach a bhronntar ar dhearaí sármhaithe a mbíonn cruthaitheacht, aireagacht agus géarchúis mar shaintréithe acu. Is déantúsáin ghlic agus chruthaitheacha go suntasach iad buaiteoirí Cré-umha a dhearbhaíonn taithí fhairsing, samhlaíocht agus acmhainneacht a ndearthóirí. Táthar ag súil go mbeidh an dearadh Quintessence Spectrum Series Lampa Bhoird Iniompartha ina rud a bhfuil an-mheas air, a n-ardaítear agus a ghráitear, atá thar a bheith gairmiúil agus nuálach. Ionchorpraíonn an dearadh seo a bhuaigh Duais Cré-umha A' Design Award na cleachtais is fearr san ealaín, san eolaíocht, sa dearadh agus sa teicneolaíocht, agus tá sé sármhaith as a aird ar mhionsonraí. Sásaíonn an dearadh Quintessence Spectrum Series Lampa Bhoird Iniompartha riachtanais go hálainn, bainíonn sé le mianta, cuireann sé draíocht ar mhothúcháin agus tarraingíonn sé fiosracht.

Taobh Thiar den Dearadh

Pacáiste Preasa

Creidiúintí, baill foirne agus sonraí teicniúla curtha ar fáil ag an dearthóir.

Airíonna Uathúla: The Spectrum Series is a limited-edition series of rechargeable table lamps featuring a never-before-seen type of lattice shade. The edition of 100 lamps is created using a parametric ‘object flow,’ resulting in a unique silhouette and lattice design for each lamp. Furthermore, each shade is printed in-house using fully custom g-code to ensure a flawless, clean lattice. As with an art practice, each lamp of the series will only be produced once and includes a certificate of authenticity.
Toisí & Pacáistiú: Each lamp varies in WxD, but they are all 353mm Height. The shades vary from around 90mm W x 73mm D at the smallest to around 190mm W x 154mm D at the largest. The bases are all 110mm W x 110mm D and account for 238mm of the Height. All the shades are therefore 115mm Height. Naturally, in cases where the shade WxD is smaller than the base, the base WxD will be the assembled product WxD.
Clibeanna: 3D printing, creative lighting, merging art + design, lattice lamp, limited edition design, 3D printed lamp, lattice, emerging tech, gcode, parametric design
Teicneolaíocht Táirgthe: Spectrum Series lampshades are created out of recycled PLA on a custom Voron R2.4 3D printer using regular FDM technology. The real technical challenge comes from the lattice shape of the shades; I have developed an entire software stack in Grasshopper for Rhino to generate these parametric lattice form as well as the G-code that runs the printer. This allows for exceptionally precise printed lattices with clean lines and no messy parts, virtually impossible to achieve with traditional slicers.
Dúshlán Deartha: I developed this project from scratch using my own ideas about lattices and the ways they interact with themselves to produce scintillating visual effects. It's not as simple as making any warped lattice and putting a light inside; only specific configurations of the lattice elements will produce the necessary visual interference. Not only did I need to produce the software to print the lattices, I needed to test many different lattice types before arriving at parameters for the final results.
Taighde: I have conducted some experiments using lamps from the Spectrum Series in order to determine the impressions they give people. This involved instances of walking around busy nightlife streets carrying a lamp, as well as bringing a lamp to an outdoor music festival. My data collection consisted of tracking passerbys' reactions. The lamps were head-turning, but very few people will strike up conversation about such a thing. I think this approach was valuable and uncommon but not a complete study.
Inspioráid: Ever since I first experienced 3D printing, I have been driven to create objects that can only be made using this technology. The Spectrum Series is an example of that: a non-solid lampshade, where the bulb is blocked not by a solid piece of material, but many tiny struts that, in its ideal form, never allow the viewer a direct glimpse of the bulb. Lattices with this much variability and style could never be produced until the advent of 3D printing, and that is what inspires me.
Fad an Tionscadail: Quintessence: Spectrum Series builds on work I've done with lattice printing since June 2021, with intensive programming and design conceptualization work commencing in September 2022. My original concept for a lattice lamp was first realized circa 2014, just as a preliminary prototype. The project is based in Hong Kong, and is ongoing.
Sreabhadh Oibríochta: Spectrum Series lamps are fully portable, battery-powered with around 20hr battery life, and have a base that is designed to resemble an old-style candlestick holder for a bit of a throwback feeling. A user may also carry the base by its stem, which includes a convenient wiggle shape to hold as well. Notably, the lamp is touch-activated at a small silver knob discreetly included on the base, and the light may be dimmed by touching and holding the knob, to dim down from full and up from dimmed.
Creidiúintí Íomhá: All materials: Jeffrey Geiringer and Clever Machine Limited, 2023-2024.