Openwear Fearas Fréamhshamhlaithe So-Chaite le Leijing Zhou

Is buaiteoir an-mheasúil den ghradam fíor-ardghradamach 2024 Duais Iarainn A' Design Award sa Chatagóir Comórtais Dearadh Innealtóireachta é an dearadh Openwear Fearas Fréamhshamhlaithe So-Chaite le Leijing Zhou.

IarannInnealtóireacht· 2024

Openwear Fearas Fréamhshamhlaithe So-Chaite

le Leijing Zhou

Cliant: Zhejiang University

Buaiteoir an ghradaim Duais Iarainn A' Design Award sa Chatagóir Innealtóireacht

53,846

Buaiteoir Gradaim Fíoraithe

Fíoraigh Stádas Gradaim do #159003

Féach ag A' Design Award Preasráiteas Suaitheantas Gradaim

Dathanna

An Dearadh

Maidir le Openwear Fearas Fréamhshamhlaithe So-Chaite

Is fearas é Openwear chun fréamhshamhlacha leictreonacha so-chaite a thógáil go tapa. Áirítear sa fhearas clár forbartha USB Lilypad atá modhnaithe, aon mhodúl déag nua-dhearta agus cáblaí naisc thapa. Iompraíonn gach modúl slis ionchuir nó aschuir agus sé phionna de thrastomhas 3 mm. Tá maignéid de thrastomhas 10 mm socraithe ar chúl na gclár, sa chaoi go gcloíonn na páirteanna leis an éadach trí phaidleoga maighnéadacha in ionad fuála. Ceanglaíonn nascóirí-O agus boltaí na pionnaí le chéile. Is féidir fréamhshamhlacha a thógáil, a thástáil agus a atheagrú go díreach ar an bhfabraic.

An Aitheantas

Maidir leis an Duais Iarainn A' Design Award

Bhuaigh an dearadh Openwear Fearas Fréamhshamhlaithe So-Chaite Duais Iarainn A' Design Award, aitheantas gradamach a bhronntar ar dhea-dhearaí a chomhlíonann na riachtanais ghairmiúla agus thionsclaíocha a bhíonn á n-éileamh ó chruthuithe a ndearnadh go maith iad. Léiríonn buaiteoirí Iarainn scil mhór, speisialtóireacht ard, tuiscint saineolaí agus cumas cruthaitheach a gcruthaitheoirí. Táthar ag súil go mbeidh an dearadh Openwear Fearas Fréamhshamhlaithe So-Chaite ina chruthú a bhfuil an-mheas air, a n-ardaítear agus a ghráitear atá praiticiúil agus nuálach. Comhtháthaíonn an dearadh seo a bhuaigh Duais Iarainn A' Design Award na cleachtais is fearr sa tionscal agus tá saintréithe teicniúla inniúla aige nasctha le heolas agus le tallann. Tá meas ar an dearadh Openwear Fearas Fréamhshamhlaithe So-Chaite as a dhúthracht agus dearadh é chun feabhsuithe cáilíochta beatha a sholáthar a chabhraíonn leis an domhan a dhéanamh ina áit níos fearr.

Taobh Thiar den Dearadh

Pacáiste Preasa

Creidiúintí, baill foirne agus sonraí teicniúla curtha ar fáil ag an dearthóir.

Airíonna Uathúla: Openwear is a toolkit for building rapid wearable prototypes. It includes a modified Lilypad USB development board, 11 newly designed modules, and quick connecting cables. This kit facilitates rapid prototyping by enabling quick attachment and connection and allows users to directly build and test prototypes on the intended substrate like clothes.
Toisí & Pacáistiú: Development board size is ϕ50*1mm, module size is ϕ25*1mm.
Clibeanna: Hardware, Electronic, Toolkit, Wearable, E-textile
Teicneolaíocht Táirgthe: For the modules, we have designed 11 different modules with input or output chips contained on each module. Each module has six 3mm diameter pins. For quick fixing, we fixed a 10mm diameter magnet on the bottom of the development board and modules, which works with the magnetic fixing pads to attach to clothes. For quick connects, we used O-connectors and bolts, which work well with the 3mm pin sizes on the PCB.
Dúshlán Deartha: The biggest challenge in the whole research was to achieve a rapid fixing and connection of the PCB. We tried a variety of methods including pins, buttons, velcro, and finally we chose to use magnets with O-connectors, which had not been used before.
Taighde: The success of the LilyPad has resulted in the creation of various development boards, such as the more compact TinyLily and the Circuit Playground with many sensors. However, these variations only modify the dimensions or integrate sensors, without modifying the Lilypad's method for constructing wearable circuits. This method presents a challenge in prototyping wearable circuits: sewing processes are time-consuming and set a high threshold for beginners. Furthermore, the troubleshooting process in wearable circuit prototyping often requires resetting and resewing. Once the development board is integrated into the fabric, the complexity of the debugging code also increases proportionally.
Inspioráid: Common wearable circuits often need to be fixed using sewing, which is very cumbersome. To solve this problem, we took inspiration from magnetic buttons. We have embedded magnets in the back of the PCB to fix it using magnetic force.
Fad an Tionscadail: The project started in August 2023 in Ningbo and finished in January 2024
Sreabhadh Oibríochta: 1. Building the First Circuit Prototype: Select modules based on design requirements and assemble them on a flat surface for initial circuit testing and debugging. 2. Continuous Testing and Adjustment of the Circuit: Reconfigure module positions on the body for testing purposes. 3. Building the Final Circuit: Sew components directly onto fabric using conductive yarn or utilize sewing magnet fixing pads as an alternative method. This ensures flexibility and ease of removal.
Baill Foirne: Leijing Zhou
Xin An
Yiqing Zhang
Yang Mao