Engo Fochabhán Cadhnra le Vladimir Zagorac

Is buaiteoir an-mheasúil den ghradam fíor-ardghradamach 2023 Duais Iarainn A' Design Award sa Chatagóir Comórtais Dearadh Fuinnimh é an dearadh Engo Fochabhán Cadhnra le Vladimir Zagorac.

IarannFuinneamh· 2023

Engo Fochabhán Cadhnra

le Vladimir Zagorac

Cliant: EnGo Planet

Buaiteoir an ghradaim Duais Iarainn A' Design Award sa Chatagóir Fuinneamh

26,517

Buaiteoir Gradaim Fíoraithe

Fíoraigh Stádas Gradaim do #148633

Tabhair Cuairt ar an Suíomh Féach ag A' Design Award Preasráiteas Suaitheantas Gradaim

Dathanna

An Dearadh

Maidir le Engo Fochabhán Cadhnra

Is fochabhán cadhnra insháraithe é Engo atá deartha do tháirgí gréine agus úsáidí eile stórála fuinnimh. Tá an cásáil déanta d'alúmanam le fráma cruach, pléataí plaisteacha agus inslithe rubair. Cruthaíonn imill ingearacha smiotánaithe agus cúinní cúlaithe cosán cáblála folaithe, ionas go bhfanann an cáblú néata sa dá threo, cothrománach agus ingearach araon. Clúdaíonn ballaí sínte ag an mbarr agus ag an mbun na cáblaí agus ceadaíonn siad carnadh sábháilte, agus fágtar spás fós chun na críochfoirt a nascadh. Coimeádann trí shraith inslithe an paca cadhnra ag teocht oibre chobhsaí.

An Aitheantas

Maidir leis an Duais Iarainn A' Design Award

Bhuaigh an dearadh Engo Fochabhán Cadhnra Duais Iarainn A' Design Award, aitheantas gradamach a bhronntar ar dhea-dhearaí a chomhlíonann na riachtanais ghairmiúla agus thionsclaíocha a bhíonn á n-éileamh ó chruthuithe a ndearnadh go maith iad. Léiríonn buaiteoirí Iarainn scil mhór, speisialtóireacht ard, tuiscint saineolaí agus cumas cruthaitheach a gcruthaitheoirí. Táthar ag súil go mbeidh an dearadh Engo Fochabhán Cadhnra ina chruthú a bhfuil an-mheas air, a n-ardaítear agus a ghráitear atá praiticiúil agus nuálach. Comhtháthaíonn an dearadh seo a bhuaigh Duais Iarainn A' Design Award na cleachtais is fearr sa tionscal agus tá saintréithe teicniúla inniúla aige nasctha le heolas agus le tallann. Tá meas ar an dearadh Engo Fochabhán Cadhnra as a dhúthracht agus dearadh é chun feabhsuithe cáilíochta beatha a sholáthar a chabhraíonn leis an domhan a dhéanamh ina áit níos fearr.

Taobh Thiar den Dearadh

Pacáiste Preasa

Creidiúintí, baill foirne agus sonraí teicniúla curtha ar fáil ag an dearthóir.

Airíonna Uathúla: The straightforward geometric form of the enclosure is interrupted only by chamfered vertical edges and recessed corners. These details are part of a hidden cabling solution, especially useful within large battery sets, enabling clean and minimally noticeable wiring in any direction, both horizontally and vertically. Extended walls on the top and bottom of the housing keep the cables covered and allow safe stacking while giving enough room to connect the terminals between the stacked pieces.
Toisí & Pacáistiú: 30Ah unit W: 205mm, D: 90mm, H: 215mm; 60Ah unit W: 220mm, D: 120mm, H: 380mm; 100Ah unit W: 248mm, D: 120mm, H: 556mm.
Clibeanna: Smart Battery, Power Wall, Stackable, Minimal, Cable Management
Teicneolaíocht Táirgthe: Aluminum casing, steel frame, plastic plates, rubber insulation
Dúshlán Deartha: The battery is to be used in retrofit solar equipment, as an individual product, inside solutions such as power walls, electric vehicles, yachts, etc. That required smart usage of available space. Thermal and water insulation were given careful attention. Three layers of insulation, including ceramic coating, keep the battery pack at a constant temperature and operational between minus twenty and plus eighty degrees Celsius. The rubber used for insulation of the top and bottom of the enclosure gives enough flexibility to compensate for an uneven floor but does not allow capsizing.
Taighde: A simple production process in any given volume, different sizes of battery packs used, and low starting cost suggested aluminum for the housing. That also planted the idea to use as little manual operation as possible, calling for a minimal but characteristic design that could be produced by CNC cutting and bending. The proportions of the few visible details were refined according to the dimensions of cables, contacts, and connectors, which needed to fit perfectly in the space between the neighboring housings.
Inspioráid: The project started with the idea to produce battery casings for a range of EnGo Planet's solar products. After analysis of a typical installation process and everyday usage scenarios, inspiration was found in pure functionality and minimal aesthetic expression. Easy stacking, optimal space usage, and intelligent cable management were the main focus of the design.
Fad an Tionscadail: The project lasted several weeks and took place in USA and Europe.
Sreabhadh Oibríochta: A combination of design details and flexible materials used on the top and bottom of the housing keep the wiring neat and give a clean look to any battery set. The bottom rubber surface features two openings that match the position of the terminals on the unit placed below. The side openings allow lifting the case using a strap, which makes the stacking of heavier versions of the battery easier. The operation and capacity of the unit can be monitored by a smartphone over Bluetooth. The product is available with an optional voltmeter, switch, and USB inlets for charging mobile devices.
Paitinní: Vladimir Zagorac
Baill Foirne: Vladimir Zagorac
Creidiúintí Íomhá: Vladimir Zagorac