Vista EY2T Motorisearre Biometryske Identifikaasjekamera troch Chris Dopp & Travis Baldwin

Vista EY2T Motorisearre Biometryske Identifikaasjekamera troch Chris Dopp & Travis Baldwin is in heech wurdearre winner fan de tige prestizjeuze 2015 A' Design Award yn Sulver yn de kompetysje-kategory Befeiliging, Feilichheid en Tafersjochprodukten Ûntwerp.

SulverBefeiligingsprodukten· 2015

Vista EY2T Motorisearre Biometryske Identifikaasjekamera

troch Chris Dopp & Travis Baldwin

Klant: Vista Imaging and Crea Inc Design LTD

A' Design Award yn Sulver Winner yn de kategory Befeiligingsprodukten

25,961

Ferifiearre Priiswinner

Ferifiearje Prisstatus foar #40052

Besykje Side Besjoch by A' Design Award Parseberjocht Priisbadge

Kleuren

It Untwerp

Oer Vista EY2T Motorisearre Biometryske Identifikaasjekamera

Vista EY2T is in motorisearre biometryske identifikaasjekamera foar iris- en gesichtsherkenning. It apparaat skant it sichtfjild op syk nei gesichten, wêrnei motoren de kamera draaie om op de eagen te rjochtsjen. In brede spreiding fan ynfraread LED's en in autofocus-systeem meitsje it mooglik om op in ôfstân fan 3 oant 6 foet op te nimmen, sadat hânmjittich rjochtsjen net nedich is. Njoggen sensoaren oan de foarkant binne ferienige efter ien inkeld swart gesicht, en de silinderfoarmige pillefoarm mei rûne úteinen jout it apparaat in kalme en net-bedrigjende foarmjouwing. De kamera kin standalone brûkt wurde of mei in wânmontaazje.

De Erkenning

Oer de A' Design Award yn Sulver

Vista EY2T Motorisearre Biometryske Identifikaasjekamera is in winner fan de A' Design Award yn Sulver, in bûtengewoan prestisjeuze erkenning foar topûntwerpen dy't prachtich en yndrukwekkend binne. Sulverwinners binne tige briljante en ekstreem kreative wurken dy't de treflike ekspertize, it talint en de skerpsinnigens fan har ûntwerpers yllustrearje. Fan Vista EY2T Motorisearre Biometryske Identifikaasjekamera wurdt ferwachte dat it in prachtich foarbyldwurk is, opmerklik profesjoneel en djip ynnovatyf. Dit winnende ûntwerp fan de A' Design Award yn Sulver is in tige opfallende, bewûndere útfining dy't foardiel bringt en de grinzen fan keunst, wittenskip, ûntwerp en technology ferleget. Vista EY2T Motorisearre Biometryske Identifikaasjekamera is in skepping dêr't breed oerjûn wurdt, dy't winsken wekker makket, positive gefoelens bringt en ferwûnderjen en fernuvering opwekket.

Efter it Untwerp

Parsepakket

Credits, teamleden en technyske details levere troch de ûntwerper.

Unike Eigenskippen: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Ofmjittingen & Ferpakking: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Labels: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Produksjetechnology: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Untwerpútdaging: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Undersyk: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Ynspiraasje: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Projektdoer: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Operaasjestreamferrin: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Teamleden: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Ofbyldingskrediten: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015