Horizontal Long Mesh Nuotioteline – tekijä Shigeru Yamada

Muotoilu Horizontal Long Mesh Nuotioteline, tekijä Shigeru Yamada, on erittäin arvostettu voittaja kilpailukategoriassa Retkeilyvarusteet, palkinto 2024 Hopeapalkinto A' Design Award.

HopeaRetkeilyvarusteet· 2024

Horizontal Long Mesh Nuotioteline

Suunnittelija: Shigeru Yamada

Asiakas: Norinori Life

Palkinnon Hopeapalkinto A' Design Award voittaja kategoriassa Retkeilyvarusteet

164,851

Vahvistettu palkintovoittaja

Vahvista palkinnon tila muotoilulle #153103

Vieraile sivustolla Näytä A' Design Award -sivustolla Lehdistötiedote Palkintomerkki

Värit

Muotoilu

Tietoa: Horizontal Long Mesh Nuotioteline

Vaikka avotuli voi vahingoittaa nurmikkoa ja maaperää, tämä kevyt ja kompakti tuote ruostumattoman teräksen rungolla ja sisäänpäin kaareutuvalla verkon kehyksellä mahdollistaa nuotion nauttimisen erilaisissa ympäristöissä levittämättä tuhkaa tai kipinöitä ympäristöön. Japanissa patentoitu rakenne päästää liekit näkyviin verkon läpi yöllä, jolloin voit seurata puun hiljaista muuttumista tuhkaksi.

Tunnustus

Tietoa palkinnosta: Hopeapalkinto A' Design Award

Horizontal Long Mesh Nuotioteline on Hopeapalkinnon A' Design Award -voittaja, äärimmäisen arvostettu tunnustus, joka myönnetään huippuluokan, upeille ja vaikuttaville designeille. Hopeavoittajat ovat äärimmäisen loistavia ja erittäin luovia teoksia, jotka havainnollistavat suunnittelijoidensa erinomaista asiantuntemusta, lahjakkuutta ja terävyyttä. Horizontal Long Mesh Nuotioteline:n odotetaan olevan ihana, esimerkillinen teos, joka on huomattavan ammattimainen ja syvästi innovatiivinen. Tämä Hopeapalkinnon A' Design Award -voittajadesign on erittäin merkittävä, ihailtu keksintö, joka hyödyttää taiteen, tieteen, designin ja teknologian rajojen laajentamista. Horizontal Long Mesh Nuotioteline on laajalti kadehdittu luomus, joka herättää haluja, tuo myönteisiä tunteita ja sytyttää hämmästystä ja ihmetystä.

Muotoilun taustalla

Lehdistöpaketti

Suunnittelijan toimittamat tekijätiedot, tiimin jäsenet ja tekniset yksityiskohdat.

Ainutlaatuiset ominaisuudet: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Mitat ja pakkaus: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Tunnisteet: Outdoor, Camping, Bonfire
Tuotantoteknologia: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Muotoiluhaaste: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Tutkimus: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Inspiraatio: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Projektin kesto: This product was launched in Japan on September 1, 2021
Toimintaprosessi: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Patentit: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Tiimin jäsenet: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Kuvalähteet: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.