رفتن به محتوا
Continuous Plate House 2.0 بازسازی اقامتگاه اثر Ryumei Fujik and Yukiko Sato

اثر Continuous Plate House 2.0 بازسازی اقامتگاه توسط Ryumei Fujik and Yukiko Sato برنده بسیار ارزشمند جایزه پرافتخار 2020 جایزه برنزی A' Design Award در دسته‌بندی رقابتی طراحی فضای داخلی و نمایشگاه است.


برنزداخلی· 2020

Continuous Plate House 2.0 بازسازی اقامتگاه

توسط Ryumei Fujik and Yukiko Sato

مشتری: F.a.d.s

برنده جایزه برنزی A' Design Award در دسته‌بندی داخلی

18,545

برنده تأییدشده جایزه

تأیید وضعیت جایزه برای #92851

رنگ‌ها

طراحی

درباره Continuous Plate House 2.0 بازسازی اقامتگاه

این خانه عمدتاً در طبقه اول بازسازی شده است زیرا 18 سال از اتمام آن می گذرد. بازسازی مستلزم آن بود که فضای آشپزخانه موجود شامل آشپزخانه، گوشه صبحانه و انبار غذا به فضایی تبدیل شود که بتوان از آن برای اهداف مختلف استفاده کرد. به منظور پاسخگویی به این تقاضا، انبار مواد غذایی و راهروها حذف شد و کل فضا به عرض یک اتاق تبدیل شد و سینک ظرفشویی از نوع دیواری به نوع جزیره ای تغییر یافت و فضای بیشتری را بر روی واحد آشپزخانه متمرکز کرد. . این اتاق به عنوان یک اتاق آرام و دنج دوباره متولد شده است زیرا با پوشش چوبی پوشانده شده است.

تقدیر

درباره جایزه برنزی A' Design Award

Continuous Plate House 2.0 بازسازی اقامتگاه برنده جایزه برنزی A' Design Award است، شناختی بسیار معتبر که به طراحی‌های برجسته‌ای اعطا می‌شود که با خلاقیت، نبوغ و زیرکی متمایز می‌شوند. برندگان برنز مصنوعاتی بسیار ماهرانه و چشمگیر خلاق‌اند که تجربه گسترده، تخیل و ابتکار طراحان خود را تأیید می‌کنند. از Continuous Plate House 2.0 بازسازی اقامتگاه انتظار می‌رود شیئی بسیار ارجمند، ستوده و دوست‌داشتنی باشد که به‌طور چشمگیری حرفه‌ای و نوآورانه است. این طراحی برنده جایزه برنزی A' Design Award بهترین رویه‌ها را در هنر، علم، طراحی و فناوری در خود جمع می‌کند و به سبب توجه به جزئیات برجسته است. Continuous Plate House 2.0 بازسازی اقامتگاه نیازها را زیبا برآورده می‌کند، به خواسته‌ها دست می‌زند، احساسات را مجذوب می‌سازد و کنجکاوی را برمی‌انگیزد.

پشت صحنه طراحی

بسته مطبوعاتی

اعتبارات، اعضای تیم و جزئیات فنی ارائه‌شده توسط طراح.

ویژگی‌های منحصربه‌فرد
The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
ابعاد و بسته‌بندی
The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
برچسب‌ها
Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
فناوری تولید
The Kitchen area is covered with spruce CLT panels (made in Austria).
چالش طراحی
How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
پژوهش
Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
الهام
This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
مدت زمان پروژه
This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
اعضای تیم
Ryumei Fujiki
Yukiko Sato
اعتبار تصاویر
Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira

حمایت‌شده

فراتر از Designers.org را کاوش کنید

محصولات، خدمات و فرصت‌های شرکای تبلیغاتی ما را کشف کنید.

طراحی خوب شایسته قدردانی بزرگ است

جایزه A' Design Award یک افتخار بین‌المللی و داوری‌شده برای طراحی خوب است. در جایزه A' Design Award شرکت کنید تا فرصت کسب قدردانی شایسته‌سالارانه، شهرت، اعتبار و تبلیغات برای اثر خود را به دست آورید. اثر خود را برای جایزه A' Design Award نامزد کنید و برای کسب جایزه ارزشمند A' Design Prize رقابت کنید.

نامزد کنید