Kristof De Bock diseinatzailearen Planck Mahai

Kristof De Bock diseinatzailearen Planck Mahai lana 2020 Urrezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Altzari Diseinua Lehiaketa Kategorian.

UrreAltzariak· 2020

Planck Mahai

diseinatzailea: Kristof De Bock

Bezeroa: Dasein Products

Urrezko Saria A' Design Award Irabazlea Altzariak Kategorian

62,500

Egiaztatutako Sari Irabazlea

#93711 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Planck Mahai Diseinuari Buruz

Mahaia presiopean itsatsita dauden kontratxapatutako pieza ezberdinez osatuta dago. Gainazalak hareharrizkoak dira eta berniz matea eta oso sendoa dute. 2 maila daude, mahaiaren barrualdea hutsik dagoenez, oso praktikoa da aldizkariak edo lauak jartzeko. Mahaiaren azpian bala gurpilak daude. Beraz, zoruaren eta mahaiaren arteko aldea oso txikia da, baina, aldi berean, erraz mugitzen da. Kontratxapenak erabiltzeko modua (bertikala) oso sendoa da.

Aintzatespena

Urrezko Saria A' Design Award Sariari Buruz

Planck Mahai Urrezko Saria A' Design Award irabazlea da, lehen mailako, zoragarriak eta nabarmenak diren diseinuei ematen zaien aitorpen izugarri prestijiotsua. Urre-mailako irabazleak berrikuntzaz beteriko, ikuspegi handiko eta distiraz liluragarriak diren sorkuntzak dira, beren diseinatzaileen genioa, jakituria eta trebetasuna islatzen dutenak. Planck Mahai oso goraipatua, joera-markatzailea eta monumentala den asmakizuna izatea espero da, balio aurrekaririk gabea eskaintzen duena. Urrezko Saria A' Design Award irabazi duen diseinu hau proiektu ikusgarri eta errespetatua da, artearen, zientziaren, diseinuaren eta teknologiaren mugak oso onuragarriro zabaltzen dituena. Planck Mahai desira-sentimendu biziak sortzen dituen, grina pizten duen, sormena bultzatzen duen eta liluratzen gaituen lana da.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
Neurriak eta Ontziratzea: Width 75 cm x Depth 46 cm x Height 30 cm
Etiketak: Objectdesign, coffeetable, furniture, living room
Produkzio Teknologia: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
Diseinu Erronka: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
Ikerketa: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
Inspirazioa: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
Proiektuaren Iraupena: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
Eragiketa Fluxua: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
Taldekideak: Kristof De Bock
Irudi Kredituak: Photograper Pieter Gregoire