Ludovic Lahccen and Raoul Morel diseinatzailearen Hydrospine Freediving Ballast

Ludovic Lahccen and Raoul Morel diseinatzailearen Hydrospine Freediving Ballast lana 2023 Zilarrezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Kirol Artikulu, Fitness eta Aisialdi Ekipamenduen Diseinua Lehiaketa Kategorian.

ZilarKirol Artikuluak· 2023

Hydrospine Freediving Ballast

diseinatzailea: Ludovic Lahccen and Raoul Morel

Bezeroa: Apnea Sub

Zilarrezko Saria A' Design Award Irabazlea Kirol Artikuluak Kategorian

756,911

Egiaztatutako Sari Irabazlea

#148412 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Hydrospine Freediving Ballast Diseinuari Buruz

Apnea egiteko bizkarreko pisu-sistema, oreka eta flotagarritasun ultra zehatza ahalbidetzen duena. Bere aktiboak, bere karga ahalmen modularra eta azkarra, 6 kg-ra arte, edozein posiziotan erabil daiteke, edozein apnea diziplina. Askapen azkarreko eta doitzeko bekletaz hornituta dago, tamaina desberdinetara egokitzeko, edozein sexua edozein dela ere, eramandako pisua azkar ahazten zaituen erosotasun izugarria eskainiz. Bere diseinua itsas animalien eta abiadurarako sortutako engranajeen fusiotik dator, oso lerro hidrodinamikoak emateko eta ur azpian irristatze ezin hobea eskaintzeko. Bere aldakortasunak kontzeptu bakarra bihurtzen du

Aintzatespena

Zilarrezko Saria A' Design Award Sariari Buruz

Hydrospine Freediving Ballast Zilarrezko Saria A' Design Award irabazlea da, goi-mailako, zoragarriak eta liluragarriak diren diseinuei ematen zaien ezohiko aitorpen prestijiotsua. Zilar-mailako irabazleak lan oso distiratsuak eta sormen biziko lanak dira, beren diseinatzaileen aditutasun, talentu eta zorroztasun nabarmenak erakusten dituztenak. Hydrospine Freediving Ballast erakusleiho-lan zoragarria, nabarmenki profesionala eta sakonki berritzailea izatea espero da. Zilarrezko Saria A' Design Award irabazi duen diseinu hau asmakizun oso nabarmena eta miretsia da, onura ekartzen duena eta artearen, zientziaren, diseinuaren eta teknologiaren mugak zabaltzen dituena. Hydrospine Freediving Ballast jende askok inbidia duen sorkuntza da, desirak pizten dituena, sentimendu positiboak ekartzen dituena eta harridura eta txunditzea pizten dituena.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Neurriak eta Ontziratzea: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Etiketak: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Produkzio Teknologia: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Diseinu Erronka: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Ikerketa: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspirazioa: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Proiektuaren Iraupena: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Eragiketa Fluxua: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patenteak: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Taldekideak: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Irudi Kredituak: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel