Ozgun Kilic Afsar diseinatzailearen OmniFiber Zuntz Morfagarri Autohautemailea

Ozgun Kilic Afsar diseinatzailearen OmniFiber Zuntz Morfagarri Autohautemailea lana 2022 Brontzezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Ehungintza, Oihal, Ehundura, Eredu eta Tela Diseinua Lehiaketa Kategorian.

BrontzeEhungintza· 2022

OmniFiber Zuntz Morfagarri Autohautemailea

diseinatzailea: Ozgun Kilic Afsar

Bezeroa: Ozgun Kilic Afsar

Brontzezko Saria A' Design Award Irabazlea Ehungintza Kategorian

42,390

Egiaztatutako Sari Irabazlea

#131625 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

OmniFiber Zuntz Morfagarri Autohautemailea Diseinuari Buruz

OmniFiber zuntz mikrofluidiko-teknologia bat da ehun eta jantzi robotikoetarako. Zuntzak bere deformazioa hautematen du eta mekanikoki erantzuten dio horri. OmniFiber-ek uzkurtu, luzatu, tolestu eta bihurritu egiten da berehalako erantzunarekin, uzkurtze-ratio altuarekin eta indar-emaitza handiarekin. Zuntz bakar bat 500 mikroi bezain mehea izan daiteke edo 2 milimetroko diametroa izan dezake, eta ehunetan puntuz edo ehunduz txertatu daiteke. Jantzigarri den kontrol-modulu batek aire-presioa eta emari-tasa aldatzen ditu mugimendua programatzeko. Aplikazioen artean daude jantzigarri zinestesikoak, doikuntza dinamikoko jantziak eta ehunetan oinarritutako gailu haptikoak.

Aintzatespena

Brontzezko Saria A' Design Award Sariari Buruz

OmniFiber Zuntz Morfagarri Autohautemailea Brontzezko Saria A' Design Award irabazlea da, sormenak, asmamenak eta zorroztasunak bereizten dituzten diseinu bikainei ematen zaien aitorpen oso prestijiotsua. Brontze-mailako irabazleak trebetasunez beteriko eta nabarmenki sortzaileak diren artefaktuak dira, beren diseinatzaileen esperientzia zabala, irudimena eta ekimena egiaztatzen dutenak. OmniFiber Zuntz Morfagarri Autohautemailea oso estimatua, miretsia eta maitea den objektua izatea espero da, nabarmenki profesionala eta berritzailea dena. Brontzezko Saria A' Design Award irabazi duen diseinu honek artearen, zientziaren, diseinuaren eta teknologiaren praktika onenak biltzen ditu eta xehetasunei ematen dien arretagatik bikaina da. OmniFiber Zuntz Morfagarri Autohautemailea beharrak bikain asetzen dituen, desirak ukitzen dituen, sentimenduak xarmatzen dituen eta jakin-mina erakartzen duen lana da.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: OmniFiber is a high-pressure microfluidic fiber technology for robotic textiles and garments. The fiber is engineered to sense its own physical deformation and mechanically respond to it. OmniFiber has versatile morphing behavior such as contracting, extending, bending and coiling with immediate response, high contraction ratio and high force output. This allows a myriad of applications including kinesthetic wearables for skill learning and transfer, dynamic fitting garments, and textile-based haptic devices for telepresence applications.
Neurriak eta Ontziratzea: A single OmniFiber device can be as thin as 500 microns and as large as 2 millimeters in diameter. They can be fabricated theoretically at infinite lengths, although we have so far achieved a continuous fabrication of a 60 meters-long fiber spool.
A single contractible fiber of 1.8 mm diameter exhibits forces up to 19 Newtons, demonstrating high speeds of linear actuation with as little as 5 milliseconds response time for full-state morphing.
Etiketak: Interaction Design, Materials Research, Human-Textile Interaction, Morphing User Interfaces, Haptic Devices, Soft Sensors and Actuators, Microfluidics, Intelligent Textiles, Fibers
Produkzio Teknologia: This work demonstrates that microfluidic actuation with reinforced tubular elastomers can be leveraged for fluidic morphing matter that acts as a fiber in a fabric assembly. The technology is designed for closed loop Human Textile Interaction by applying localized sensor nodes on the fiber body. A mechanical programming pipeline is developed for versatile morphing states by adding on-demand mechanical constraints. With various assemblies made of OmniFibers, in-fabric haptic feedback is achieved including high frequency oscillations, lateral skin stretch, and compression.
Diseinu Erronka: Recently, there have been remarkable advancements that yield a myriad of engineered fibers, however prior work has often focused on achieving either sensing or actuation, but seldom both. Readily employed fibers such as shape memory alloys have limitations that hinder their integration to everyday interactions. These are high cost, slow response, small forces, arduous training, and risk of burning the skin. To overcome these challenges, we established a fiber technology that uses off-the-shelf materials, is scalable, machine-knittable, safe to wear, and has immediate response.
Ikerketa: Advances in materials science invite visions of a world where people interact with machines through garments. OmniFiber presents a novel textile technology where actuated fibers are used to make self-sensing robotic fabrics. The fabrication and comprehensive system design provide designers with an accessible way to knit and weave fluidic morphing swatches. OmniFiber operates with low power, high bandwidth and is strong enough to lift kilograms of weight, making it an ideal technology for kinesthetic wearables such as respiratory regulation-wear, soft exoskeletons for dance pedagogy, and peristaltic compression garments.
Inspirazioa: Textiles are vital to our survival across scales, from medical textiles that repair our organs to blankets that provide warmth and protection. Although the development of textiles is intertwined with that of human progress, they are still valued as static and disposable goods. Advanced fibers have the potential to create a whole new industry where textiles can sense surroundings; store energy; and communicate in a single package. This will increase the value of textiles to society, transforming them from something we buy, use and throw away, to a platform for experiences and services.
Proiektuaren Iraupena: Started in April 2020 at MIT Media Lab, Cambridge, Massachusetts and ended in November 2021. The work has been presented and demonstrated at the ACM User Interface Software and Technology Symposium in October 2021.
Eragiketa Fluxua: The system design consists of a fiber based interface and a wearable pneumatic control module that together convert energy from a compressed fluid medium to mechanical motion. The fiber behavior is programmed by miniaturized valves in the control module that vary air pressure and flow rate, operated through a graphical interface. The users can interact with OmniFiber based devices leveraging the closed loop strain control functionality for real time, and record-playback interactions, or alternatively design morphing behavior using the event scheduler on the graphical interface.
Patenteak: Provisional Patent. Patent No. 63/276895. Joint, Media Laboratory. 2021.

https://patents.media.mit.edu/23866TJ
Taldekideak: Ozgun Kilic Afsar
Ali Shtarbanov
Hiroshi Ishii
Irudi Kredituak: All Photo credits to Ozgun Kilic Afsar, 2021.
All Video credits to MIT, 2021.