Disainilahendus Tibetan Eagle Autokaravanide laagriplats, autor Arch-Hermit

Disainilahendus Tibetan Eagle Autokaravanide laagriplats, mille autor on Arch-Hermit, on kõrgelt hinnatud 2020 auhinna Kuldauhind A' Design Award võitja konkursi kategoorias Arhitektuuri, hoonete ja rajatiste disain.

KuldArhitektuur· 2020

Tibetan Eagle Autokaravanide laagriplats

disainer: Arch-Hermit

Klient: Arch-Hermit

Auhind Kuldauhind A' Design Award kategoorias Arhitektuur

25,066

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #88561

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Tibetan Eagle Autokaravanide laagriplats

Tibetan Eagle on Tiibetis Ranwu järve ääres asuv laagriplats, mis on loodud omal käel autoga reisijatele. Ala paikneb põhjas asuva riikliku maantee G318 ja lõunas asuva järve vahel. Integreeritud teeninduskeskuse peahoone ulatub piki maanteed umbes 80 meetrit ja on tõstetud umbes 8 meetri kõrgusele, nii et hooned ei varja üksteist. Järve poole avaneb klaassein. Hoonetes on kasutatud valgeid tsementkiudplaate, punaseid ilmastikukindlaid terasplaate, paksu läbipaistvat klaasi, tumehalli terast, kohalikku puitu ja kohalikke veerkive. Monteeritavad teraskonstruktsioonid piiravad mõju looduslikule ümbrusele.

Tunnustus

Auhinnast Kuldauhind A' Design Award

Tibetan Eagle Autokaravanide laagriplats on Kuldauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse esmaklassilistele, imelistele ja silmapaistvatele disainidele. Kuldvõitjad on ülimalt uuenduslikud, visioonilised ja glamuurselt pimestavad looming, mis peegeldab oma disainerite geniaalsust, tarkust ja oskusi. Tibetan Eagle Autokaravanide laagriplats peaks olema kõrgelt kiidetud, suundi seadev ja monumentaalne leiutis, mis pakub enneolematut väärtust. See Kuldauhinna A' Design Award võidudisain on suurejooneline, lugupeetud projekt, mis toob suurt kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Tibetan Eagle Autokaravanide laagriplats tekitab intensiivset soovi, äratab kirge, julgustab loovust ja lummab meid.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The campsite is located beside Ranwu Lake. Its north is the winding G318,and its south is the dreamland Ranwu Lake. The campsite is the best spot for self-drive travelers to stop and enjoy the beautiful scenery of Ranwu Lake. The campsite is high in the north and low in the south, with maximum altitude. The terrain slopes gently and is broad with a spectacular field of view. There are green grass and ancient trees beside the lake, green pine trees and azalea floating clouds above the mountains.
Mõõtmed ja pakend: With a total project area of about 70 mu, Phase 1 Project uses an area of 2,400 square meters
Sildid: Self-drive, RV Campsite, Ranwu Lake, Tibet
Tootmistehnoloogia: This Project uses white and red preferred by Tibetans as the main color of the buildings. It creates a unique, natural, warm and extraordinary living space with a great combination of white cement-fiber plates, red weather-resisting steel plates, thick transparent glass, dark gray steel, local woods and local pebbles.
Disainiülesanne: The camp is 3897-3911 meters above sea level and the climate is bad. In the north side of the mountain, a flood drainage ditch runs through it, forming a waste land accumulated by debris flow gullies, which has been neglected for many years. The original terrain of the camp is 2-5 meters lower than that of National Highway 318 as a whole. The attraction and visibility of the camp for 318 transit tourists are relatively poor. It is a dilemma for all parties to build a camp here.
Uurimistöö: In order to maximize the field of view, the main building of the integrated service center extends about 80 meters along the horizontal line of the G318. The bottom overhead of the building is about 8 meters. The lake side of the building is a glass wall to ensure the best view of the lake. The main building is made of white irregular lines and a large quantity of transparent glass. The changes of plane and vertical shape make the gentle slope to re-connect with the ground.
Inspiratsioon: By taking advantage of the original terrain height difference and combining the height adjustment of the building overhead layers, it can ensure that all buildings from the lakeside to the G318 are elevated and do not block each other. The appearance of the main building is shaped by the terrain, just like an eagle spreading its wings near the lake shore.
Projekti kestus: The project started in April 2009 in Ranwu Town Tibet and finished in August 2010 in Ranwu Town Tibet.
Tööprotsess: In order to minimize the impact of this Project on the land and its neighboring environment and protect the natural environment of “Ranwu Lake Scenic Spot” better, by combining the difficulty in transporting the materials and the climate influence on the project construction, the buildings and structures of the whole project all use assembled steel structure except that the structural foundation uses reinforced concrete. Assembled steel structure has absolute advantages in environment protection, construction period, material transportation and anti-seismic effect.
Patendid: Arch-Hermit
Meeskonnaliikmed: Youcai Pan
Zhe Yang
Renzhen Chen
Piltide autorid: Arch-exist Photography