Disainilahendus Diax Project Esitlusnäitus, autor Leafer Circular Design

Disainilahendus Diax Project Esitlusnäitus, mille autor on Leafer Circular Design, on kõrgelt hinnatud 2024 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias Messiarhitektuuri, interjööride ja ekspositsiooni disain.

RaudMess· 2024

Diax Project Esitlusnäitus

disainer: Leafer Circular Design

Klient: Chunlyn WWCB Tech

Auhind Rauaauhind A' Design Award kategoorias Mess

16,373

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #157991

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Diax Project Esitlusnäitus

Diax on uus taaskasutusmaterjal mitmekülgsete rakendusvõimalustega. Näituse eesmärk oli esile tuua selle potentsiaal ja leida koostööpartnereid. Uudishimu ja ideede äratamiseks kujundati näitus helgeks ja avatuks. Väikese jäätmetekke tagamiseks kasutati üüritavaid raame, moodulseid stende ja otsetrükki plaadile. Loodi ka näidistooted, mis näitavad, et Diax pole pelgalt materjal; see on jätkusuutlikuma elu katalüsaator.

Tunnustus

Auhinnast Rauaauhind A' Design Award

Diax Project Esitlusnäitus on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Diax Project Esitlusnäitus peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Diax Project Esitlusnäitus on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: Diax is a new recycled material with versatile applications. The goal of the exhibit was to highlight its potential and attract collaborators. To encourage curiosity and ideas, the exhibit was designed bright and open. To be low-waste, it was designed to use rental frames, modular display boards, and direct-to-board printing. Example products were also created to showcase that Diax is not just a material; it's the catalyst for a more sustainable life.
Mõõtmed ja pakend: The exhibition area was 6 x 6 m. The central 'X' area consisted of four wings each 150 x 52 x 200 cm to share the material applications we arranged: Horticultural Uses, Life with Texture, Blocks & Tiles, and Paints & Plasters. A total of 10 products were shown; 6 were created for this exhibition, 3 were created in prior projects, and 1 from a different partner. The two side areas were 300 x 35 x 140 cm, with one featuring the ten 10 cm cube Diax shrinkage texture blocks.
Sildid: exhibit, modular, low-waste, material, texture, reusable, horticulture, paint, tile, cement
Tootmistehnoloogia: To strongly convince potential partners of Diax’s potential, tangible examples were made. Brainstorming from the material’s qualities, a few with high value were chosen. To produce them, rendered 3D models were printed and turned into silicone molds. Previous experience helped inform Diax ratios and drying time. Additionally, a series of texture blocks were created to showcase varying surface shrinkage in mixtures with cement, sand, clay, chalk, or paper pulp.
Disainiülesanne: Exhibitions are often temporary, and thus designed and built in a way that produces a large amount of post-demolition trash. This design challenges that default, while creating an aesthetic and meaningful exhibition. It achieves this with rented modular frames and lighting instead of single-time construction. Also, the client’s needs in the future prompted which products and signage to create. Modular display boards were created to allow for future spatial rearrangement and content updating.
Uurimistöö: This exhibition aimed to sustainably showcase the potential of Diax and attract collaborators. Several new product examples were created, and an open, bright exhibit shared the material in an inspiring, tangible way. This approach paid off with several new partnerships formed and little waste produced as a result of the exhibition design. The client also decided to officially establish a brand for the new material.
Inspiratsioon: Prior cases produced great results in discovering product applications for Diax, a low-waste, adaptable material. However, as the small/medium-sized manufacturer, Chunlyn faced challenges translating these project successes into new business opportunities and demonstrating Diax's value to potential partners. Inspired by this challenge, the design of this exhibit aimed to encourage visitor’s imagination and attract like-minded partners for further development.
Projekti kestus: Project planning started in April 2023, and the showcase was featured at the Experience Life exhibition on a weekend in July 2023 in Tainan, Taiwan.
Tööprotsess: Unique from the other cubicle booths, this exhibit uses a bright, open design around a tall central axis to attract visitors to curiously stroll in. Spotlights and placement at hand-level encouraged visitors to touch the various material samples and product examples. Interested professionals could leave their business card in exchange for a product sample bag. To great success, the booth was shared a lot on social media and material samples quickly ran out.
Patendid: Copyrights belong to Leafer Circular Design, 2024.
Meeskonnaliikmed: Victor Wu
Tzuhsu Lin
Craig Bossley
Piltide autorid: Image #1, Photographer Craig Bossley, Exhibit Vibes, 2023.
Image #2: Photographer Craig Bossley, Inspiring the Next Generation, 2023.
Image #3: Photographer Craig Bossley, Texture Blocks, 2023.
Image #4: Photographer Craig Bossley, Plant Closeup, 2023.
Image #5: Photographer Craig Bossley, Feels like Home, 2023.