Disainilahendus Hexa Valgus, autor Sepehr Mehrdadfar

Disainilahendus Hexa Valgus, mille autor on Sepehr Mehrdadfar, on kõrgelt hinnatud 2023 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Valgustitoodete ja -tarvikute disain.

HõbeValgustus· 2023

Hexa Valgus

disainer: Sepehr Mehrdadfar

Klient: Hamoun Design and Idea

Auhind Hõbeauhind A' Design Award kategoorias Valgustus

45,061

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #148179

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Hexa Valgus

Hexa disaini eesmärk oli luua lamp, mis tagab arhitektuurilise ruumi valgustuse nii üldises kui ka kohalikus režiimis, omab võimet ruumis laieneda ning parandab ruumi esteetilist kvaliteeti. Hexa on kolmandik täielikust kuusnurgast. See jaotus suurendab Hexa võimalusi erinevates kompositsioonides ja laienemises. Disaini vorm järgib geomeetrilist mustrit, mis on inspireeritud "Girih" ja "miniatuur" tehnikatest traditsioonilistes Iraani arhitektuurilistes kaunistustes.

Tunnustus

Auhinnast Hõbeauhind A' Design Award

Hexa Valgus on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Hexa Valgus peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Hexa Valgus on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A Hexa is one third of a full hexagon. This division increases the ability of Hexa in the variety of composition and expansion.
Mõõtmed ja pakend: Length of each module: 770 mm
height of profile: 40 mm
width of profile: 20 mm
Sildid: Geometry, Persian Miniature, Muqarnas, Texture, Wide lighting,Geometric expansion, Dynamics and movement, Simple connections
Tootmistehnoloogia: Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
Disainiülesanne: It was important to choose the appropriate geometric shape as the initial model. Odd polygons do not extend in a straight line, but even polygons do. In the end, a hexagon was chosen because it formed a more complex structure than a quadrilateral and simpler than a higher degree pair of polygons.
Uurimistöö: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.

The form of this work follows a geometric pattern that is inspired by "knotting" and "miniature" in traditional Iranian architectural decorations.
To achieve this form, all kinds of geometric shapes such as regular, irregular, odd and even polygons were tested, and in this process "hexagon" was chosen as the primary model because:
Due to the type of internal angles, the shapes with odd sides were oriented in geometric expansion and had less compatibility with general architectural plans, so their use in internal architecture required more and more complex control.
- The hexagonal pattern, when expanded, creates a far more "eye-catching" context than the quadrilateral and "simpler" than the higher degrees of the polygons.
In the next step, the hexagonal pattern was divided into smaller parts, and at the end, a line segment with a curve corresponding to the internal angle of the hexagon was selected as the main module of the design. In fact, a hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.
Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble", "move and replace" and finally, the user can easily control the light network.
Inspiratsioon: The form of this design follows a geometric pattern that is inspired by "Girih" and "miniature" in traditional Iranian architectural decorations.
Girih ( "knot", also written gereh) are decorative Islamic geometric patterns used in architecture and handicraft objects, consisting of angled lines that form an interlaced strapwork pattern.
Projekti kestus: This project designed in 2022 in Tehran, Iran.
Tööprotsess: The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble",
"move and replace" and finally, the user can easily control the light network.
Piltide autorid: saeed MirTahmasb
maryam saeedpoor