Disainilahendus Digital Taihu 3D-prinditud mööbel, autor Yang Pu and Ding Wen Nic Bao

Disainilahendus Digital Taihu 3D-prinditud mööbel, mille autor on Yang Pu and Ding Wen Nic Bao, on kõrgelt hinnatud 2023 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias 3D-prinditud vormide ja toodete disain.

Raud3D-printimine· 2023

Digital Taihu 3D-prinditud mööbel

disainer: Yang Pu and Ding Wen Nic Bao

Klient: Nanjing University of the Arts and RMIT University

Auhind Rauaauhind A' Design Award kategoorias 3D-printimine

43,526

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #147462

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Digital Taihu 3D-prinditud mööbel

Digitaalne Taihu kasutab 3D-printimise tehnoloogiat, et rakendada traditsioonilise Hiina kultuuri digitaalajastul, ühendades Taihu kive kahesuunaliste evolutsiooniliste struktuurioptimeerimise algoritmidega ning uurides looduslikest süsteemidest lähtuvaid disainigenereerimise meetodeid, mille tulemuseks on optimeeritud konstruktsiooniga digitaalselt jätkusuutlikud disainilahendused.

Tunnustus

Auhinnast Rauaauhind A' Design Award

Digital Taihu 3D-prinditud mööbel on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Digital Taihu 3D-prinditud mööbel peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Digital Taihu 3D-prinditud mööbel on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The work uses 3D printing to activate traditional Chinese culture to realize the synergistic design of structural properties generated by the 'Taihu Stone' and bi-directional evolutionary structural optimization algorithms, focusing on the complexity of virtual birth forms into the rationality of physical forms. This digital design practice learns from nature and derives its design biomorphic approach from natural systems to achieve the sustainable goal of living in symbiosis with nature.
Mõõtmed ja pakend: Length 915mm, width 1125mm, height 1052mm
Sildid: Bi-directional evolutionary structural optimization, 3D Printing, Conceptual Design, Furniture Design
Tootmistehnoloogia: A bi-directional evolutionary structural optimization method was used to optimize the furniture structure and to obtain a simulated natural form of Taihu stone. The furniture model is constructed from liquid photosensitive resin material by integrated 3D printing. The actual construction was carried out using metal 3D printing.
Disainiülesanne: The most difficult part of the project development process is the topology optimization phase, including the application of relevant mechanics methods and the testing of data iterations. Secondly, it was also a challenge to verify the feasibility of the structural materials, which needed to be considered in terms of production difficulties and the extent to which people would use them.
Uurimistöö: Research objectives: 1. The digital expression of traditional Chinese cultures. 2. furniture structures optimization and 3D printing technology combined to achieve sustainability goals. Research methods: 1. Structural data collection and analysis. 2. Algorithmic data iteration to generate forms. Research findings: 1. 3D printing technology allows for rapid lightweight design, moving away from traditional production models. 2. Furniture structures and materials are cutting-edge. Research Impact: Provides the possibility of diverse design for the future digital design industry.
Inspiratsioon: In the long history of furniture design, traditional culture has given furniture shapes a richer morphological language, and 3D printing as a new design culture can bring more surprises to furniture design. From a design perspective, we hope that the combination of the natural form of the traditional Chinese stone "Taihu Stone" and digital design will result in a more vivid shape through 3D printing, activating a new way of communicating Chinese traditional culture in the digital age.
Projekti kestus: The project started in July 2022 and ended in September 2022. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Tööprotsess: Firstly, the furniture is designed using a bi-directional evolutionary structural optimization algorithm and the prototype is iterated according to the corresponding optimization results. Secondly, the furniture is constructed by 3D printing. The topologically optimized furniture not only has reasonable structural properties, reduces the amount of material used, and shortens the construction production cycle, but also results in a better quality customized lightweight designs.
Meeskonnaliikmed: Yang Pu
Ding Wen Bao
Piltide autorid: Yang Pu and Ding Wen‘Nic’Bao，2022.