Disainilahendus Tai Diivanilaud, mille autor on Sunriu Design, on kõrgelt hinnatud 2023 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Mööblidisain.
HõbeMööbel· 2023
Tai Diivanilaud
disainer: Sunriu Design
Klient: Sunriu Design
Auhind Hõbeauhind A' Design Award kategoorias Mööbel
Kinnitatud auhinna võitja
Kinnita auhinna staatus disainile #146594Disain
Teosest Tai Diivanilaud
Tai on diivanilaud, mis on valmistatud kasutusest kõrvaldatud alajaama metallplaatidest. Disain pikendab äravisatud materjalide kasutusiga ja vähendab jäätmeid. Tootmiseks on vaja vaid laserlõikust ja painutamist, mistõttu kulukaid vorme ei ole tarvis. Lamedalt pakendatud osad paneb kokku kasutaja ise, mis lühendab tootmisaega. Välisjooned meenutavad palveks kokku pandud käte kujutist ning alumine konstruktsioon on inspireeritud liblikistmest. Keskne ava hoiab avatud raamatut. Laua mõõtmed on 450 korda 350 korda 550 millimeetrit.
Tunnustus
Auhinnast Hõbeauhind A' Design Award
Tai Diivanilaud on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Tai Diivanilaud peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Tai Diivanilaud on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.
Disaini taustal
Pressimaterjalid
Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.
- Unikaalsed omadused
- Use the discarded substation metal sheets and only laser cutting, and bending are required to complete the side table. Just like many of Taiwanese unique appliance's feature processing and assembling with existing materials. The Tai Side Table has a place where books can be temporarily placed in the center of the table without bookmarks. The below structure is taken from the butterfly stool. Also, its tabletop can be replaced with any material at our fingertips and can even be transformed into a low table or bench.
- Mõõtmed ja pakend
- 450 mm x 350 mm x 550 mm
- Sildid
- Side Table, Metal Side Table, Side Table Design, Upcycling Furniture, Circular Economy, Circular Design, Minimalist Furniture, Oriental Aesthetics.
- Tootmistehnoloogia
- There is no need to use costly molds and be limited by the minimum production volume. It only requires laser cutting and bending to finish the process. Even if you only make one side table, you can make it by hand bending. The flat-packed design can significantly reduce production time through assemble by user. It is just like the production concept of digital manufacturing.
- Disainiülesanne
- The most challenging part is that it is not easy to find a factory that can help because the discarded material needs to be cleaned and cut off the rusty part of the metal before the next step of the production process, and factories hardly ever encounter materials that need such treatment.
- Uurimistöö
- Global warming and environmental pollution have been very important issues for this generation. Reducing carbon emissions is a pressing issue in addressing global warming and environmental pollution. The key to reducing carbon emissions is to shift from a linear economy to a circular economy. The recycling of waste materials is an important part of it, which can significantly reduce waste, pollution and carbon emissions. Tai Side Table aims to effectively utilize retired substation metal plates, extend the service life of the materials, and maximize the use of resources to reduce the burden on the environment.
- Inspiratsioon
- The exterior lines are inspired from IM Pei's The Luce Chapel. It has the image of praying with folded hands in the East. The reason for the flat-packed design which are easy to produce and assemble is to make better effectively use of the retired substation metal sheets to recreate furniture. Under the condition of not using excess sheet metal, we hope to create furniture that is easy to produce, beautiful, and eco-economical.
- Projekti kestus
- The project started in June 2022 in Taiwan Kaohsiung
- Tööprotsess
- The metal edges are trimmed and round cornered to provide a good touch when moving the side table. The original lacquer of the transformer box can be retained or repainted. It's simple exterior and lines make it easy to match most interiors and even outdoor use.
- Piltide autorid
- Jing Cyuan Tang, 2022.
Sponsoreeritud
Avasta rohkem kui Designers.org
Avasta tooteid, teenuseid ja võimalusi meie reklaamipartneritelt.
Avasta rohkem
Seotud disainid
Avasta rohkem auhinnatud disaine samast kategooriast, valitud kvaliteedi alusel.
